Wood Floor Finishes

Osmo Polyx-Oil Original 3032 and 3062 is a protective wood treatment for interior use. Combines natural oils and waxes to form a hardwearing and durable finish which is ideal for wooden flooring and furniture.  Osmo Polyx Hardwax Oil provides a warm and rich effect that brings out the true beauty of all woods by emphasising the grain and promoting its natural characteristics. Exceptional durability is achieved. Microporous and will not crack, flake or peel.              Key Features Resistant to common household spillages Application is by brush or roller  Coverage up to 24sq/m per litre Touch dry between 4-8 hours and recoatable after 12 hours. Recommended 2 coats Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly.On cork, longer drying times are to be taken into consideration (at least 24 hours).Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.

Read more less

Osmo Polyx-Oil Rapid 3232 and 3262 is ideal for protecting all wooden floors, such as solid wood and plankwood flooring, blockstrip, OSB and cork floors, as well as for furniture. Key Features  Fast drying (apply 2 coats in a single day) Enhances the wood's natural character Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Resistant to common household spillages Application is by brush or roller Coverage up to 24sq/m per litre Dry time 4 hours and recoatable after 12 hours. Recommended 2 coats Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Rapid is ready to use. Do not thin.Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Osmo Microfibre Roller or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well within 10-15 minutes. Wipe away any excess product.Allow to dry for approx. 4-5 hours under good ventilation. After drying, apply a second coat also thinly and quickly. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.

Read more less

Osmo Polyx-Oil Effect Raw is suitable for the protection and nearly invisible finish of all light-coloured interior woods, such as wooden floors and furniture. Key Features  Nearly invisible appearance, no 'permanent wet effect' Light coloured wood stays light coloured Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Application   SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Effect Raw is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. Applying Polyx®-Oil Effect Raw over very textured or coarse surfaces could appear more white. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Floor Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Applying excess Polyx®-Oil Effect Raw 3044 may lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry. Allow to dry for approx. 24 hours under good ventilation.After drying, quickly apply a second coat also thinly.When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Polyx®-Oil Effect Raw is slightly white tinted and protects lighter coloured wood species nearly invisibly. On dark, reddish or ‘smoked / fumed’ wood species, Polyx®-Oil Effect Raw is visible as slightly white chalky surface. Applying excess Polyx®-Oil Effect Raw 3044 may also lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry.A trial application is recommended. Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.Any brushstrokes can be removed with an unused dry Microfibre Roller within 30 minutes after applying. For extractive rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop. Occasional Maintenance: If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Spray cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first. Recoating: When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.

Read more less

Osmo Polyx Oil Tint is a professional-grade wood finish that enhances the natural beauty of your wood surfaces. This oil-based formula is easy to apply and provides long-lasting protection against wear and tear. It's perfect for use on a variety of wood types, including oak, pine, and mahogany, and can be used on both indoor and outdoor surfaces. One of the unique features of Osmo Polyx Oil Tint is its wide range of available colours. The oil is also water-resistant and resistant to heat and , making it ideal for use in high-traffic areas.  Protects and colours with wood grain visible. Harmonious appearance Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Key Features FINISHES - White, Light Grey, Honey, Amber, Terra, Graphite, Black (all Satin) WATER POP- spray or damp cloth timber surface, allow to dry prior to applying tints to intensify colour APPLICATION TOOLS - Osmo Flat Brush, Floor Brush, Hand Pad or Osmo Microfibre Roller RECOMMENDED USE - Interior wooden floors and furniture RECOAT - One coat, when signs of wear become visible SIZES - 5ml, 125ml, 750ml, 2.5L DRY TIME - 24 hours CLEAN UP - Osmo Brush Cleaner COVERAGE - 30m²/L with one coat COATS - 1-2 coats CARE - Osmo Wash and Care, or Spray-Mop Application Transparent colour: With Osmo Flat Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.Allow to dry for approx. 24 hours under good ventilation. If a stronger colour intensity is desired, repeat the process (however maximal two coats). Lightly stained effect: Within 20 minutes after application, wipe away product along the wood grain with a cloth or white pad. Allow to dry for approx. 24 hours under good ventilation. Intensive colour: For this application, we recommend Osmo Wood Wax Finish or Osmo Oil Stain. Important: Apply maximum one coat of Polyx®-Oil Tints or Oil Stain to flooring.(Not applicable for Polyx®-Oil Tints 3040 White, see Notes.) After thoroughly drying, a top coat with a clear Osmo Polyx®-Oil is to be carried out. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.

Read more less

Bona Natural Primer is a coloured waterborne primer for untreated wood floors designed to give an untreated, raw wood look. It can be applied in one or two coats to achieve the desired appearance. Highly forgiving formulation designed for easy roller application. To enhance the untreated appearance combine Bona Natural Primer with Traffic HD Raw, Traffic HD Extra Matt or Bona Mega ONE Extra Matt. Light, untreated wood look Easy roller application GreenGuard certified for low indoor air emissions Dry time 2-3 hours (20°C/60% R.H) Coverage upto 12sq/m per litre     Technical Datasheet download.PDF

Read more less

Bona prime Amber Produces a rich, amber wood colouration similar to that of traditional, solvent based lacquers but without the hazards associated. Excellent abrasion properties. Highly suitable for wood floors with underfloor heating and/or moving floors such as end grain or plank floors. Suitable for oak and darker types of wood including tropical species.   Key features Rich, amber wood colouration Highly suitable for underfloor heating Excellent abrasion performance Reduces potential for sidebonding GreenGuard approved for low indoor emissions Coverage upto 10sq/m per litre  Dry time 1-2 hours 

Read more less

Bona Prime Intense For a medium rich wood colouration. Excellent abrasion properties and highly suitable for floors with underfloor heating and/or moving floors such as end grain or plank floors. Suitable on practically all types of wood and especially on tropical wood.   Key Features  Medium wood colouration Excellent abrasion properties First choice for underfloor heating Reduces potential for side-bonding GreenGuard approved for low indoor emissions Coverage upto 10sq/m per litre Dry time 1-2 hours  Technical datasheet download.PDF

Read more less

Bona Prime White is a coloured waterborne primer for untreated wood floors designed to give a whitewashed appearance on lighter wood species. The intensity and depth of colour can be controlled by the number of applications. Applied in a single layer it typically gives a light whitewashed appearance and on some wood species can produce an impression of raw, untreated wood. For a more solid white feel two, or more, applications may be made. The highly forgiving formulation is designed for easy roller application. For the best appearance combine Bona White with Traffic HD Raw, Traffic HD Extra Matt or Bona Mega ONE Extra Matt. Whitewashed look Easy roller application GreenGuard certified for low indoor air emissions Drying time 1-2 hours  Coverage 10sq/m per litre Technical datasheet download.PDF

Read more less

Bona Mega lacquer is an oxygen-crosslinking polyurethane finish, ideal for heavy domestic and light commercial timber flooring, offering superb protection against spills. Its innovative formulation has proven perfectly suited to wooden floors with high movement, planks and underfloor heating. Waterborne lacquer with high chemical resistance.   Key Features  1K simplicity with 2K performance Touch dry and ready to recoat in 2.5–3.5 hours @ 20°C. Light use in 24 hours No side-bonding, ideal for underfloor heating, plank floors etc  Dispersion mainly consisting of plant-based oil Excellent resistance to scuff marks and common chemicals GreenGuard approved for low indoor emissions A ready-to-use, single-part water-based floor varnish for high traffic environments Ideal for heavy domestic and light commercial floor use, Extremely durable and hard wearing Highly resistant to wear, scuff marks and scratches Offers excellent liquid and chemical resistance GreenGuard approved for low indoor emissions Low V.O. Easy and safe to apply (recommended Bona Super Coat Roller)   Bona Wood Floor Primers For application to bare wood floors we recommend using one coat of Bona wood primer. Bona Primers help with adhesion between the varnish and floor and can help with the colouration of the final finish. Bona Mega is compatible with the following primers: Product Us Bona Prime UX A non-yellowing, clear primer for use with the Bona range of varnishes Bona Intense Primer A 100% polyurethane based primer for finishes requiring better adhesion Bona Amber Primer Wood primer for oak and darker tropical species of wood. Important: The use of Bona White Primer or Bona Natural Primer is not recommended for this product as the natural ingredients in Bona Mega will yellow the final finish. Preparation Previously waxed, polished or oiled floors CANNOT be over-coated with Bona Mega Varnish unless sanded back to bare wood. Floors to be lacquered must be clean, dry and free of all dust, dirt and other surface contaminates. Sand floors back to bare wood Final sanding should be done with a 100 grit sanding disk, screen or good quality sandpaper Use a vacuum cleaner to remove all traces of sanding dust from the area to be varnished For filling small gaps between walls, skirting boards and floors use Bona Gap Master For filing holes, splits, dents and other surface imperfections, use Bona Mix and Fill or Bona Mix and Fill Plus Bona mega technical data sheet

Read more less

Bona Mega One is the next generation in wood floor treatment. Quick to dry, easy to abrade and excellentbuild characteristics. Bona Mega ONE focuses on simplifying the craftsman workingday for quicker and easier jobs with great reliability. It brings out a nice, warm woodcolouration while establishing a long-lasting protection for wooden floors in domesticand medium wear commercial environments. Can be used with or without primer (see below).Key Features  Coverage Up to 10m² per litre Drying time 1h 30m High build characteristics Quick drying Excellent standing properties Non-yellowing Available in 1L and 5L Easy and safe to apply (recommended Bona Super Coat Roller)   Bona Wood Floor Primers Although Bona Mega one does not always require a primer, for application to softwood plank floors, endgrain floors and hardwood floors with underfloor heating, it is recommended to always use a primer. Primers help with adhesion between the varnish and floor and can help with the colouration of the final finish. Bona Mega One is compatible with the following Bona floor primers: Product Use Bona Classic UX Primer A ready-to-use primer for use with the Bona range of varnishes Bona Intense Primer A 100% polyurethane based primer for finishes requiring better adhesion Bona White Primer A high quality wood primer that creates a 'white-washed' effect on wood flooring Bona Amber Primer Wood primer for oak and darker tropical species of wood. GreenGuard approved Bona Natural Primer Designed to preserve the look of of unfinished wood Preparation  Previously waxed, polished or oiled floors CANNOT be over-coated with Bona Mega Varnish unless sanded back to bare wood. Floors to be lacquered must be clean, dry and free of all dust, dirt and other surface contaminates. Sand floors back to bare wood Final sanding should be done with a 100 grit sanding disk, screen or good quality sandpaper Use a vacuum cleaner to remove all traces of sanding dust from the area to be varnished For filling small gaps between walls, skirting boards and floors use Bona Gap Master For filing holes, splits, dents and other surface imperfections, use Bona Mix and Fill or Bona Mix and Fill Plus    

Read more less

Bona Traffic HD 5L (with hardener). A lacquer offering ultimate durability and an extremely fast hardness development time - meaning the floor can go back into full use after just 12 hours.An ideal choice for shops and public locations where minimal downtime is important and the highest possible durability is required. Its low emissions and low odour make it possible to use without vacating the adjacent areas and ensures there is no lingering smell. Non yellowing formulation.KEY BENEFITS Allows full traffic after 12 hours, extremely fast hardness development time Ultimate durability EC1RPLUS approved. The industry's best possible assurance against indoor air pollution for a high level of health protection and environmental compatibility Suitable for recoating pre-finished surfaces Very low odour Non-yellowing Friction approved to both EN 14904:2006 and DIN 18032:2

Read more less

Bona Traffic HD Raw 5L (4.54L includes hardener 0.41L). Offers a high level of protection for wooden floors while maintaining the look and feel of untreated wood. A premium product for a premium look. Its unique surface structure creates a soft, haptic feeling which is not only a pleasure to walk on but has a high slip safety making it great for homes with children and pets. Safe in both application and in use as shown in EC1PLUS classification for very low impact on the indoor air environment. Clear, non-yellowing formula. To enhance the raw appearance apply a primer coat (1st coat) of Bona Natural Primer. Key Features  Keeps the look and feel of raw wood Lacquered protection with natural impression Easy and safe to apply (recommended Bona Super Coat Roller) High slip safety Ultra matt finish Unmatched speed and durability Allows full traffic after 12 hours Excellent flow and levelling Low in odour and VOC (<5%) Technical Datasheet download.PDF FAQ _______________________________________________________________________ Q. Do I have to mix all of the lacquer and hardener together at the same time? A. No, however it is important to get the mixing correct, we would recommend purchasing a Bona mixing bottle, this will allow for precise measuring.  _______________________________________________________________________ Q. What is the untreated/raw look of timber? A. Generally this is the colour of the timber prior to any coating/finishing  or a fully sanded timber surface.  _____________________________________________________________________ Q. Will my wood flooring need to be primed before applying Bona Traffic HD Raw? A. Yes, it is very important to use a bona primer. Due to the strength of Bona traffic HD a Bona primer will help prevent side bonding (joining individual planks/pieces together) allowing timber to move with fluctuations in temperature and humidity.  ______________________________________________________________________ Q. What is the best primer for the raw look? A. One coat of Bona Natural primer.  ______________________________________________________________________  Q. How much will 5L of Traffic HD cover ?  A. As a general rule 1L of lacquer will cover approximately 10m2 of timber flooring, this means 5L of Traffic HD will cover approximately 50m2 in total (one coat). Although 5L has been known to cover up to 60m2 (one coat). ______________________________________________________________________ Q. Does Bona traffic HD Raw work on all timber species? A. The quick answer is yes, however the best results seem to be on pine and oak timber floors. Due to the white pigment used in the Bona natural primer Some exotic hardwoods (red woods etc) may not have the desired effect. 

Read more less

A range of fast drying alcohol-based stains suitable for spray, dip and hand application. Formulated to provide excellent grain definition and depth of colour on all wooden substrates including floors. Morrells Light Fast Wood Stain are non-grain raising and resist colour fading due to light fast pigments. Morrells Light Fast Wood Stains are professional products appropriate for all interior wood applications. Application instructions can be found in the data sheet. Morrells Light Fast Wood Stains must be sealed with a lacquer, such as Bona Lacquers, to seal in and protect the colour. Pack size: 1L, 5L Touch dry: 15 - 30 minutes @ 18°C Recoatable: 15 - 30 minutes @ 18°C. For flooring, 2 hours minimum before sealer/topcoat Coats: 1 - 2 Coverage: 8 - 12m² per litre dependent upon the size, orientation and surface quality of the item being coated Packing: Overnight minimum dependent on the conditions

Read more less

The Morrells range of SCANDI stains has been inspired by Nordic design and consists of classic wood shades and contemporary pigmented colours. All are lightfast and suitable for wooden substrates. Formulated to provide excellent grain definition and depth of colour while maintaining lightfastness. SCANDI pigmented stains have been designed with a longer drying time to better suit rag-on-rag-off applications, allowing greater control of colour and grain definition. Suitable for tinting pre-catalyst lacquers up to a maximum of 5% by volume. For flooring applications, a minimum of 2 hours to dry must be given before sealing and topcoating. Drying and recoat time will vary with temperature, humidity and absorption of the timber. SCANDI stains must be topcoated. If topcoating with manually-applied flooring lacquer, use waterbased products only. Preparation Ensure surface is clean, dry and free from old finishes, dust, dirt, oil and other contaminants. Pre-sand with 180 grit sand paper prior to stain application to avoid patchy or uneven drying. Test patch It is advisable to test the colour in an inconspicuous area or on a spare piece of substrate.  Note The SCANDI range contains pigments that will settle with time. Ensure the stain is thoroughly mixed before use and at regular intervals to ensure consistent colour. Hand staining Use a soft, white, lint-free cloth. Avoid using coloured or printed rags as dyes can bleed into the stain and cause discolouration. Apply the stain wet to the whole surface to avoid uneven penetration and then remove excess with a clean cloth. For larger surfaces it may be appropriate to apply the stain in sections. When removing excess stain, work with the direction of grain. Spray application Spray apply an even wet coat Remove excess with a soft, white, lint-free cloth, working with the direction of the grain. Wiping off process can enhance the evenness of the colour and highlight the grain definition and the natural figuring of the substrate.  Dip application Plunge or controlled dip can be undertaken Wipe off excess stain with a clean, white, lint-free cloth, working with the direction of the grain. Pack size: 1L, 5L, 25L Touch dry: 60 minutes @ 18°C Recoatable: 60 minutes @ 18°C Coats: 1-2 Coverage: 8m² per litre dependent upon the size, orientation and surface quality of the item being coated Packing: Overnight minimum dependent on the conditions

Read more less