FREE Next Working Day Delivery On All Online Orders Before 3PM

Osmo - Shop By Brand

Elevate your interior and exterior wood care with our comprehensive range of Osmo products. Renowned for their exceptional quality and eco-friendly formulations, Osmo offers a versatile selection of finishes and treatments to enhance and protect your wood surfaces. Explore our range of Osmo oils, including oil tints and door oils, designed to nourish and enrich wood while providing durable protection against the elements

48 products


  • Osmo Natural Bristle Brush - Wiltshire Wood Flooring Supplies

    Osmo Natural Bristle Brush

    136 in stock

    The Osmo Soft Tip Brush is ideal for applying the range of Osmo wood oils.Looking for a different type of brush? See the full range of Osmo brushesThis product can also be found as part of the Osmo Premium Roller and Osmo Brush Set and the Osmo Decking Brush SetPreparationAs a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish.The necessity of sanding and removing previous finishes from the surface to be worked on will depend on the oil, wax or varnish used (see product instructions for guidance on this).ApplicationSimply dip your Osmo Soft Tip Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grainAny surplus should be removed immediately with a microfibre clothApply second coat of oil with the Osmo Oil Finish Application Fleece and remove excessAftercareOsmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.Features and Highlights A high quality soft tip brush for the application of wood oils Ideal for both professional and DIY use Flat, straight edge construction, perfect for corners and edging Ergonomic wooden handle for comfort and durability Sturdy metal bristle brace reduces bristle loss during application Bristles are made from a high quality synthetic mix for a perfect finish every time

    136 in stock

    £4.76 - £14.91

  • Hand Pad Holder and Accessories - Wiltshire Wood Flooring Supplies

    Hand Pad Holder and Accessories

    109 in stock

    The hand pad holder is for attaching to the Osmo Oil Finish Application Fleece Can also be used with the red, green and white Superpad. It Aids with control and precision Suitable for DIY and professional use Measures 85 x 135mm. Uses Top Tips: Superpads are a rectangular size of 95 x 155 mm, ideal for manual processing in combination with Osmo Hand Pad Holder. For the best results and protection of kitchen worktops and dining furniture, apply the first coat of Osmo TopOil with the Osmo Flat Brush and leave to dry before applying a final coat using the application fleece with Hand Pad Holder. It is not recommended to use the Application Fleece when applying Wood Protector or Wood Wax Finish Clear Extra Thin due to the lower viscosity of these particular products. To maintain the wood’s protection, apply Osmo Liquid Wax Cleaner using the white pad with Hand Pad Holder. To remove tough stains and dirt, depending on the extent of the dirt use red pad in combination with Hand Pad Holder. Can be used for smaller areas or for edges and corners that cannot be reached by machines, approx. 1 m² per side. Additional Information: Hand Pad Holder size: 85 x 135 mm Rectangular pad sizes: 95 x 155 mm

    109 in stock

    £4.52 - £9.14

  • Osmo UV-Protection Oil Extra 420 - Wiltshire Wood Flooring Supplies

    Osmo UV-Protection Oil Extra 420

    11 in stock

    Osmo UV-Protection-Oil Extra is a satin, clear finish for exterior. It is based on natural oils, is microporous, and does not crack, flake, peel or blister. When used as a final finish after staining wood, Osmo UV-Protection-Oil Extra prolongs the renovation time significantly. As a stand alone finish, with two coats, it prolongs the greying process on vertical surfaces by UV-Protection factor 12 in comparison to untreated wood. The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.

    11 in stock

    £27.29 - £79.56

  • Osmo polyx hard wax oil 0.75 - 2.5L

    Osmo Polyx-Oil Original

    1 review

    11 in stock

    Osmo Polyx-Oil Original 3032 and 3062 is a protective wood treatment for interior use. Combines natural oils and waxes to form a hardwearing and durable finish which is ideal for wooden flooring and furniture.  Osmo Polyx Hardwax Oil provides a warm and rich effect that brings out the true beauty of all woods by emphasising the grain and promoting its natural characteristics. Exceptional durability is achieved. Microporous and will not crack, flake or peel.              Key Features Resistant to common household spillages Application is by brush or roller  Coverage up to 24sq/m per litre Touch dry between 4-8 hours and recoatable after 12 hours. Recommended 2 coats Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly.On cork, longer drying times are to be taken into consideration (at least 24 hours).Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.

    11 in stock

    £31.93 - £96.72

  • Osmo MS Trade Flexible Wood Flooring Adhesive 15kg - Wiltshire Wood Flooring Supplies

    Osmo MS Trade Flexible Wood Flooring Adhesive 15kg

    14 in stock

    OSMOUK MS Trade is a one component adhesive specially formulated for the interior installation of parquet block, engineered wood plank as well as pre-finished and unfinished solid wood flooring. Solvent and isocyanate free, with negligible VOC content and low odour. Thanks to the special formulation the adhesive has great early strength build for immediate grab and quickly builds to a tenacious but elastic bond as the adhesive continues to cure.  Specifications  Approx. coverage: up to 18m² Application climate: 15-30°C, 30-60% RH Size: 15KG Suitable for use with under floor heating 100% solids and low odour Water and solvent free Isocyanate free High strength Waterproof bond Early quick grab Meets environmental emissions according to DIBt

    14 in stock

    £84.99

  • Osmo Polyx Oil Rapid

    Osmo Polyx Oil Rapid

    23 in stock

    Osmo Polyx-Oil Rapid 3232 and 3262 is ideal for protecting all wooden floors, such as solid wood and plankwood flooring, blockstrip, OSB and cork floors, as well as for furniture. Key Features  Fast drying (apply 2 coats in a single day) Enhances the wood's natural character Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Resistant to common household spillages Application is by brush or roller Coverage up to 24sq/m per litre Dry time 4 hours and recoatable after 12 hours. Recommended 2 coats Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Rapid is ready to use. Do not thin.Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Osmo Microfibre Roller or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well within 10-15 minutes. Wipe away any excess product.Allow to dry for approx. 4-5 hours under good ventilation. After drying, apply a second coat also thinly and quickly. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.

    23 in stock

    £35.08 - £106.58

  • Osmo Top Oil - 0.5L - Wiltshire Wood Flooring Supplies

    Osmo Top Oil - 0.5L

    17 in stock

    Osmo TopOil is ideal for protecting interior furniture surfaces and work surfaces made of solid wood or edge-glued panels (e.g. kitchen worktops, desks, shelving etc.). Also suited to cork and OSB.

    17 in stock

    £22.40

  • Osmo Wash and Care - Wiltshire Wood Flooring Supplies

    Osmo Wash and Care

    2 in stock

    Osmo Wash and Care cleaner is a specially formulated wood cleaner suitable for cleaning and maintaining oil and wax finishes. Its pH balanced formula quickly and effectively cleans wooden flooring, furniture, doors, wall and ceiling panels to leave a streak free finish. Application SURFACE PREPARATION To remove loose debris, we recommend using Osmo Dust-Mop, a conventional vacuum cleaner or broom. METHOD OF APPLICATION Manual: Wash and Care is ideally used with Osmo Micro-Mop Plush. Add Osmo Wash and Care to water. Clean the floor with a damp (not wet) mop and wipe dry immediately. When applied regularly, the surface becomes resistant to dirt and wear. Machine: Spread the diluted Wash and Care solution with a pump sprayer. Loosen dirt with a single disc machine, e.g. Osmo FloorXcenter, and a white pad.Immediately, mop away or remove with a round Osmo Microfibre Pad for machines. NOTE To specifically remove especially tough stains and to occasionally, intensively refresh waxed or oiled floors, we recommend using our tried and trusted Osmo Liquid Wax Cleaner, which is based on natural plant oils and waxes (undiluted application with Osmo Active Fibre Cloth).For a complete renovation, we recommend an Osmo Polyx®-Oil.

    2 in stock

    £18.34 - £67.73

  • Osmo Decking Cleaning Scrub Brush (150mm) - Wiltshire Wood Flooring Supplies

    Osmo Decking Cleaning Scrub Brush (150mm)

    6 in stock

    A deck cleaning brush for cleaning wooden decking boards Designed for use with Osmo Wood Reviver Gel The Osmo Decking Cleaning Brush is perfect for cleaning wooden garden decking and it is designed to be used with Osmo Wood Reviver Gel. This decking brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use.

    6 in stock

    £18.01

  • Osmo Decking Oil - Wiltshire Wood Flooring Supplies

    Osmo Decking Oil

    49 in stock

    Osmo Decking-Oils protect and maintain timber decking, garden furniture and privacy screens made of numerous coniferous and fine woods, such as pressure impregnated Pine, Douglas Fir, Cedar, Oak or Bangkirai also suitable as a transparent colour treatment of Teak, Eucalyptus and other fine woods as well as thermally treated wood. Key Features  Approx. coverage: 24m²/L with one coat No. of coats: 2 Ideal application temperature: +10°C to 35°C Drying time: 12 hrs Sizes: 0.125L, 0.750L, 2.5L Application  For a clear and natural finish for decking, apply just two coats of 007 Teak Oil, which allows the wood to naturally grey over time. The darker the colour, the slower the greying process of the wood will start to appear. Osmo Anti-Slip Decking Oil 430 can be used as the second coat after any of the coloured Decking Oils to provide a slip resistant surface. Recommended application is 35ml/m² SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding.If possible, and if the wood is absorbent please apply the first coat to all sides before installation.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain.For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing.Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying.Once dry apply the second coat – also thinly.If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. NOTE Osmo Teak-Oil 007  is a clear decking oil finish and therefore offers only little protection against UV radiation (greying).As a clear top coat for fence panels / screens, we recommend Osmo UV-Protection-Oil/UV-Protection-Oil Extra. For decking the clear Anti-Slip Decking Oil 430 should be applied over 1 x coat of a coloured Osmo Decking Oil. Clear Anti-Slip Decking oil 430 offers higher pigment protection which increases the durability of the finish against wear and weather.For especially mechanically loaded areas (e.g. decking), we recommend checking the finish at least once a year and to eventually recoat the surface with the appropriate finish.Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces.Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. Using jet/power washers or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with diluted Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth). Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

    49 in stock

    £22.40 - £82.07

  • Osmo Maintenance Oil - 1L

    Osmo Maintenance Oil - 1L

    15 in stock

    Especially developed for the most demanding wooden floors treated with Osmo Polyx®-Oil for regular cleaning and occasional refreshing and maintenance. Floors with expected high tread and quick wear can be regenerated and cleaned at the same time with Maintenance Oil. Key Features  Coverage - 40-60sqm A Litre Coats 1 coat Drying Time 3-4 hours (23°C/50% R.H.). Application to Small areas with A Cloth Larger areas with A Scraper / Microfibre roller, then Buffing machine Application SURFACE PREPARATION Wood surface must be clean, dry (moisture content max. 18 %) and free of dust.Osmo Maintenance Oil is ready to use. Do not thin.Stir well before use.Clean the surface thoroughly with Osmo Intensive Cleaner and rinse (damp mopping) with clear water.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Double Blade Scraper or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad (do not rub in 3098). Remove excess product.For smaller areas, Osmo Maintenance Oil can be applied with a lint-free cloth.Allow for good ventilation while drying. NOTE The maintenance results are influenced by several factors, including the condition of wood. Therefore, a trial application is always required. If wood is raw or already greyed, the surface must be sanded and treated with Osmo Polyx®-Oil. Do not rub in Maintenance Oil 3098 Semi-Matt/Anti-Slip with a single disc machine.

    15 in stock

    £33.29 - £36.64

  • Osmo - Roller, Tray and Brush Set - Wiltshire Wood Flooring Supplies

    Osmo - Roller, Tray and Brush Set

    Out of stock

    Complete application kit especially recommended for applying Osmo oil-based wood finishes onto both small and large areas of rough sawn, untreated or planed wood. Ergonomically shaped for fatigue-free work with optimal product absorption, allowing for an even distribution of product for the highest possible coverage. Key Features  Ideal for corners and edges User-friendly and easy to use Roller can be attached to Telescopic Handle Premium quality Suitable for both DIY and professional users Disposable trays

    Out of stock

    £25.65

  • Osmo Polyx Oil Effect- Raw Matt (3044)

    Osmo Polyx Oil Effect- Raw Matt (3044)

    10 in stock

    Osmo Polyx-Oil Effect Raw is suitable for the protection and nearly invisible finish of all light-coloured interior woods, such as wooden floors and furniture. Key Features  Nearly invisible appearance, no 'permanent wet effect' Light coloured wood stays light coloured Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Application   SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Effect Raw is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. Applying Polyx®-Oil Effect Raw over very textured or coarse surfaces could appear more white. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Floor Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Applying excess Polyx®-Oil Effect Raw 3044 may lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry. Allow to dry for approx. 24 hours under good ventilation.After drying, quickly apply a second coat also thinly.When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Polyx®-Oil Effect Raw is slightly white tinted and protects lighter coloured wood species nearly invisibly. On dark, reddish or ‘smoked / fumed’ wood species, Polyx®-Oil Effect Raw is visible as slightly white chalky surface. Applying excess Polyx®-Oil Effect Raw 3044 may also lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry.A trial application is recommended. Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.Any brushstrokes can be removed with an unused dry Microfibre Roller within 30 minutes after applying. For extractive rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop. Occasional Maintenance: If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Spray cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first. Recoating: When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.

    10 in stock

    £32.57 - £98.60

  • Osmo Small Roller Sleeve Replacement 2 Pack (10cm wide) - Wiltshire Wood Flooring Supplies

    Osmo Small Roller Sleeve Replacement 2 Pack (10cm wide)

    21 in stock

    Spare Microfibre Roller Sleeves (small) for use with Osmo Roller & Brush Set - Suitable for all Osmo finishes on natural, sawn wood. Ideal for treating larger areas. Contains: 2 x Osmo Microfibre Roller Sleeves (10cm wide).

    21 in stock

    £8.99

  • Osmo UV-Protection Oil Tints - Wiltshire Wood Flooring Supplies

    Osmo UV-Protection Oil Tints

    26 in stock

    All exterior woods grey into a patina colour over time, however UV-Protection Oil Tints have been developed to maintain the wood's natural colour with the use of pigments to optimally match the wood's natural characteristics. Ideal for windows, doors, cladding, fencing and other vertically structured joinery (not recommended for flat surfaces such as decking). Natural oil-based and microporous finish does not crack, flake, peel or blister. Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage. Osmo 425 Oak UV Protection Oil gives optimal protection from the sun, similar to Osmo 420 but it improves the UV resistance further by also having a small amount of Oak pigment. The oak pigment will darken the wood slightly and accentuate the wood grain but we recommend ALWAYS do a test before application, sample sachet available. For exterior use only. Especially recommended for vertical surfaces such as timber cladding, windows and doors Prolongs the renovation time significantly when used as a top coat for staining wood Contains active ingredients for the preventative protection against algae and fungal decay. Also available in 0.75 and samples sachets. 1 litre covers approx 16 square metres with 1 coat. Number of coats: 2 coats on raw wood, 1 coat for surface renewal - no sanding necessary.

    26 in stock

    £28.67 - £83.54

  • Osmo UV-Protection Oil 410 - Wiltshire Wood Flooring Supplies

    Osmo UV-Protection Oil 410

    12 in stock

    Osmo UV-Protection-Oil is ideal for all vertical exterior wood surfaces: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements).

    12 in stock

    £27.29 - £79.56

  • Osmo Easy Pads - Wiltshire Wood Flooring Supplies

    Osmo Easy Pads

    9 in stock

    Osmo Easy Pads are soft, lint free cloths that can be used for applying Osmo Wood Oils to wooden furniture, picture frames and more. They are Ideal for applying the range of Osmo Top Oil products to kitchen worktops and other wood surfaces. Perfect for cleaning and maintaining wooden surfaces when used with the range of Osmo wood cleaners and maintenance products such as Osmo Liquid Wax Cleaner, Osmo Wash and Care and Osmo Intensive Cleaner. Pack of 10.

    9 in stock

    £11.39

  • Osmo Brush Cleaner and Thinner (8000) 1L - Wiltshire Wood Flooring Supplies

    Osmo Brush Cleaner and Thinner (8000) 1L

    5 in stock

    Osmo brush cleaner and thinner is a premium quality, Benzene-free, low odour brush cleaner and thinner Effective at cleaning solvent-based products from brushes and rollers Helps promote longevity of the bristles and fibres of brushes and rollers Perfect for removing Osmo oils and waxes Very high V.O.C OVERVIEW Osmo Brush Cleaner and Thinner (8000) is a premium quality brush cleaner and thinner that is more effective than cheaper alternatives at cleaning and thinning solvent-based products. The benzene-free, low odour formula makes it more pleasant to use than harsh white spirits and meths. Applications  It is effective at cleaning a wide range of paint rollers, brushes and painting utensils including Osmo brushes. It can also be used with Osmo wood oils.

    5 in stock

    £12.94

  • Osmo Door Oil 1L - Wiltshire Wood Flooring Supplies

    Osmo Door Oil 1L

    16 in stock

    Osmo Door Oil is ideal for veneered doors. The unique formulation penetrates the wood surface which remains microporous and whilst the finish will not crack, peel, flake or blister. The surface also becomes healthy and elastic, and the wood's fibres are prevented from becoming dry and brittle over time as well as shrinking and swelling. Application SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Door-Oil is ready to use. Do not thin. Shake well before use. For solid doors, clean old microporous stains thoroughly. Old paints,varnishes and lacquers must be completely removed. If renovating veneered doors, always check with the door manufacture that renovation is possible. Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding P120-150 for solid wood doors. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. If possible, please apply the first coat to all sides before installation. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. If applying the Door-Oil 3033 Raw, remove excess white pigment before allowing the surface to dry. Allow for good ventilation while drying. After drying, apply a second coat – also thinly. NOTE Applying the product too generously and insufficient ventilation lead to delays in drying time. Oils enhance the natural tone of wood (clear Door-Oil 3060 with permanent wetlook-effect). Osmo Door-Oil 3033 Raw counteracts exactly this effect and protects lighter coloured wood almost invisibly. The original look of the wood can be kept – no emphasising of the natural colour of the wood (no wetlook-effect). On dark/reddish wood species, Osmo Door-Oil 3033 Raw can be seen as a faintly white surface. Over application of Osmo Door-Oil 3033 Raw can also result in a faintly white surface. A trial application is recommended. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner. Occasional Maintenance: For the Intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door Oil 3060 clear satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw matt as it will appear more shiny. Recoating: Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.

    16 in stock

    £38.08

  • Osmo WR Base Coat Clear (4001) - Wiltshire Wood Flooring Supplies

    Osmo WR Base Coat Clear (4001)

    8 in stock

    Osmo 4001 WR Base Coat is a clear wood impregnation for exterior use. It is a preventive preservative with active ingredients to protect against plant and animal pests such as blue stain, rot, mildew and insect attack. Nb. 4001 is the replacement for 4005 with the key differences that it is now oil based and contains protection against insect attack as well as biocides. The base coat penetrates easily and deeply into the wood - proving extra moisture protection for the wood. Key features include: Clear (4001), exterior base coat only Especially recommended for windows, cladding, garden furniture Reduces swelling and shrinkage and protects against fungal, algae, blue stain, mould growth & insect attack. Extremely water-repellent, extra moisture protection Ideal primer for Natural Oil Woodstain, Natural Oil Woodstain Effects and UV Protection Oil Will improve the coverage of the above when used on rough sawn timber Available in 0.125, 0.75 and 2.5 litres 1 litre covers approx 5 - 6 m² with 1 coat. Product coverage will depend significantly on the wood's characteristics. These figures are for smooth planed or cut timber. Other surfaces such as rough sawn, aged timber etc may lead to significantly reduced coverage. Number of coats:1 coat, a top coat from the Osmo product range must follow.Application:Apply by brush, dipping or flooding, spray only in an enclosed unit with appropriate protective equipment.Drying:Approximately 12 hours in normal climatic conditions (23°C & 50% relative humidity). Lower temperatures and/or higher humidity can increase the drying time. Allow good ventialtion when drying.Storage:Up to 5 years or more if the can is kept dry and sealed tightly. Store away from direct sunlight and extremes of temperature.

    8 in stock

    £20.61 - £57.46

  • Osmo Wax Sticks Refill Pack for Repair Set - Wiltshire Wood Flooring Supplies

    Osmo Wax Sticks Refill Pack for Repair Set

    1 in stock

    Osmo wax stick refill pack is a handy kit of 10 refill sticks in different wood shades. It can be used as a refill for Osmo Repair Kit, or used on their own with an alternative heat source to melt the wax.

    1 in stock

    £11.85

  • Osmo Polyx-Oil Tints

    Osmo Polyx-Oil Tints

    35 in stock

    Osmo Polyx Oil Tint is a professional-grade wood finish that enhances the natural beauty of your wood surfaces. This oil-based formula is easy to apply and provides long-lasting protection against wear and tear. It's perfect for use on a variety of wood types, including oak, pine, and mahogany, and can be used on both indoor and outdoor surfaces. One of the unique features of Osmo Polyx Oil Tint is its wide range of available colors. With over 30 different shades to choose from, you can easily match the oil to your desired wood tone or create a custom look. The oil is also water-resistant and resistant to heat and , making it ideal for use in high-traffic areas. To use Osmo Polyx Oil Tint, simply clean and dry the wood surface and apply the oil using a lint-free cloth or applicator pad. Allow the oil to penetrate for at least 30 minutes before buffing off any excess with a clean cloth. The oil will dry to the touch in just a few hours, but it's recommended to allow 24 hours for full drying before heavy use or furniture placement. Overall, Osmo Polyx Oil Tint is a reliable and easy-to-use choice for protecting and enhancing the beauty of your wood surfaces. Protects and colours with wood grain visible. Harmonious appearance Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Key Features FINISHES - White, Light Grey, Honey, Amber, Terra, Graphite, Black (all Satin) APPLICATION TOOLS - Osmo Flat Brush, Floor Brush, Hand Pad or Osmo Microfibre Roller RECOMMENDED USE - Interior wooden floors and furniture RECOAT - One coat, when signs of wear become visible SIZES - 5ml, 125ml, 750ml, 2.5L DRY TIME - 24 hours CLEAN UP - Osmo Brush Cleaner COVERAGE - 30m²/L with one coat COATS - 1-2 coats CARE - Osmo Wash and Care, or Spray-Mop Application Transparent colour: With Osmo Flat Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.Allow to dry for approx. 24 hours under good ventilation. If a stronger colour intensity is desired, repeat the process (however maximal two coats). Lightly stained effect: Within 20 minutes after application, wipe away product along the wood grain with a cloth or white pad. Allow to dry for approx. 24 hours under good ventilation. Intensive colour: For this application, we recommend Osmo Wood Wax Finish or Osmo Oil Stain. Important: Apply maximum one coat of Polyx®-Oil Tints or Oil Stain to flooring.(Not applicable for Polyx®-Oil Tints 3040 White, see Notes.) After thoroughly drying, a top coat with a clear Osmo Polyx®-Oil is to be carried out. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.

    35 in stock

    £32.57 - £98.60

  • Osmo Repair Kit - Wiltshire Wood Flooring Supplies

    Osmo Repair Kit

    18 in stock

    The Osmo Repair Kit can be used for making good any cracks, scratches and dents in all exterior and interior wooden surfaces. The included wax sticks are made from a blend of mineral waxes, coloured with earth and oxide dyes. Key Features For repairing scratches, dents, cracks and splits in exterior and interior wooden surfaces Suitable for solid wood, veneer, foil, thermosetting, thermoplastic & plastic surfaces Wax sticks can be mixed during melting to produce unique shades for repairs Good elasticity meaning no development of cracks Quick and easy to use. Kit Contains 6 x 8gm wax filler sticks of various colours Heat pen Batteries X 2 For an alternative interior wood filler, why not try Osmo Interior Wood Filler or Osmo Interior Gap Sealer For extra wax sticks, use Osmo Wax Stick Refill Pack Application Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.Liquify the wax filler stick or sticks with the heated melting knife and drop the melted wax filler into the damaged area until the scratch, hole or imperfection in the wood is slightly overfilled.When the wax filler has dried, use the grooved handle of the melting tool to plane the repaired area, removing any excess surface waxTo restore the grain pattern of the filled area, scratch the surface of the repair area lightly with a pointed item, then re-fill with the grain shade of waxRemove any final filler residues by polishing lightly with the grey finishing pad included within the Osmo Repair KitPlease note: The clear wax filler stick can be used to fill pressure indentations in the timber.

    18 in stock

    £22.27

  • Osmo Intensive Cleaner 1L - Wiltshire Wood Flooring Supplies

    Osmo Intensive Cleaner 1L

    7 in stock

    Osmo intensive cleaner is an ideal alternative to sanding wooden surfaces finished with oils and waxes, e.g. flooring, furniture, as well as plastics, stainless steel and other water-repellent surfaces. Product Advantages Easy application Ideal for public spaces Basic cleaning instead of sanding Can be used in the interior and exterior Method 1. Dilute concentrate 1: 10 to 1: 20 with water. 2. Apply to soiled surfaces, loosen dirt and wipe up with clean water. For machine processing on flooring, we recommend using a single disc machine (e.g. Osmo FloorXcenter) with brush attachment, red or green pad. 3. Wipe up with Osmo Micro-Mop Plush or a lint-free cotton cloth. 4. After succesfully drying, retreat the cleaned surface with Maintenance Oil or a Polyx-oil.   Never apply undiluted. Definitely perform a trial application on the subsurface. Retreatment with Maintenance oil or Polyx-Oil depends on the condition of surface after cleaning.

    7 in stock

    £19.33

  • Osmo Cleaning Kit (Successor of Osmo Opti-Set) Wood Floor Cleaning Mop Set - Wiltshire Wood Flooring Supplies

    Osmo Cleaning Kit (Successor of Osmo Opti-Set) Wood Floor Cleaning Mop Set

    3 in stock

    For cleaning and maintaining wooden, vinyl, tiled, and natural stone flooring. Easily attaches to Osmo System Telescopic Handle for back-preserving length adjustment. A dash of Osmo Wash and Care in mop water removes everyday dirt exceptionally with Micro-Mop Plush. Active-fibre cloth Eventually, flooring needs to be refreshed. With Liquid Wax Cleaner the surface is regenerated and cleaned at the same time with Active-Fibre Cloth. Telescopic pole has a high quality aluminium telescopic handle with SoftTouch grip to work safely. Simply connects to the joint for a secure fitting and effective cleaning. Pole is adjustable in length from 120-200 cm and is also suitable for use with many other tools from Osmo.   Kit Includes  Dust-Mop for dry cleaning Micro-Mop for damp-cleaning with Osmo Wash and Care Active-Fibre Cloth for intensive cleaning and refreshing with Osmo Liquid Wax Cleaner Telescopic pole (adjustable in length from 120-200 cm) Quick fix mop head  Applications  DUST REMOVAL To remove loose dirt, we recommend dry cleaning with Osmo Dust-Mop, a conventional vacuum cleaner or broom. DAMP MOPPING Prepare a dilution of Osmo Wash and Care with water in a suitable bucket (Dilution 15 mL Wash and Care per 2 litres water). Soak the Micro-Mop Plush cloth head then wring out well. Only damp mop the floor to reduce water logging. Regular cleaning will ensure the process remains very easy

    3 in stock

    £59.23

  • Osmo End Grain Sealing Wax Clear 375ml (5735) - Wiltshire Wood Flooring Supplies

    Osmo End Grain Sealing Wax Clear 375ml (5735)

    6 in stock

    Osmo End Grain sealer protects the ends of decking and other wood types. Ideal for interior and exterior use as it has excellent weather, water and dirt resistance which minimises swelling and shrinkage whilst protecting against cracks and preventing bleeding. This clear sealer has a microporous formulation which gives a breathable finish that does not peel, flake or crack. Safe for human, animal and plant once dry.   Key Features Protects edge grain of decking against cracks Prevents wood ingredients from bleeding High weather resistance Safe for human, animal and plant once dry Very water and dirt resistant Minimises wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake Suitable for interior and exterior use   Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo End Grain Sealing Wax is ready to use. Do not thin. Stir well.The finished surface is influenced by several factors, including the condition of wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, apply generously to end grains.To achieve an optimal protection for strongly absorbing end grains, we recommend applying the sealing wax two times wet-in-wet or after drying carry out a second coat. NOTE Osmo End Grain Sealing Wax is clear and therefore it can be applied universally.Please only apply to end grains. Not for area treatment. Wipe away any excess wax from other surfaces with a cloth.Oils enhance the natural tone of wood (permanent wet effect). After drying, we recommend coating the other wood surfaces with Osmo wood finishes (e.g. Bangkirai-Oil, Massaranduba-Oil, Country Colour or Natural Oil Woodstain). Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. OVERVIEW Osmo End Grain Sealing Wax protects the end grain from cracks during all elements of weathering. Minimises the water absorption, as well as the seasoning of the end grains. The surface is water and dirt resistant. Swelling and shrinking as well as ‘bleeding’ of the contents of the wood will be reduced. It is clear and is therefore universally applicable.

    6 in stock

    £20.31

  • Osmo Replacement Microfibre Roller Head - 250mm - Wiltshire Wood Flooring Supplies

    Osmo Replacement Microfibre Roller Head - 250mm

    Out of stock

    For oil based products - includes fresh box (airtight container for reuse)

    Out of stock

    £15.05

  • Osmo Anti-Bac Wood Cleaner Spray (8036) 500ml - Wiltshire Wood Flooring Supplies

    Osmo Anti-Bac Wood Cleaner Spray (8036) 500ml

    4 in stock

    Osmo Anti-Bac Wood Cleaner Spray 8036 500ml is a highly effective cleaning – Kills bacteria & viruses, Maintains protected surfaces without wear of treatment, Easy to use, simply spray and wipe clean, Suitable for domestic and commercial use. Ideal for all wooden surfaces treated with hardwaxes Ideal spray solution for everyday cleaning and maintenance – especially developed for oiled and waxed wood surfaces. Contains soaps based on natural oils to prevent the wood from drying out whilst cleaning. The water-soluble ingredients prevent streaks and do not form a layer. Especially mild on skin, free of dyes and aromas, biodegradable, free of solvents and emissions to ensure the surface remains food safe – supporting a healthy living environment.

    4 in stock

    £9.78

  • Osmo Applicator Set for applying Osmo Oils - Wiltshire Wood Flooring Supplies

    Osmo Applicator Set for applying Osmo Oils

    10 in stock

    This Osmo Oil Application Set is for the simple and optimal application of all oil finishes on a smooth subsurface. Set contents 1 x Tray with ridged area 22 x 20cm 3 x Replaceable Tray Inserts 1 x Osmo Hand Pad Holder 85 x 135mm (has Hook & Loop Fastener) 2 x Osmo Oil Finish Application Fleeces 95 x 155mm

    10 in stock

    £28.24

  • Osmo Telescopic Pole - Wiltshire Wood Flooring Supplies

    Osmo Telescopic Pole

    6 in stock

    Osmo Extension Pole making any floor or ceiling project within easy reach. Features and Highlights Extendable pole for use with Osmo Floor brushes Easily adjusted from 110cm - 220cm Ergonomic, soft-touch handle Screw-fix head connects to Osmo applicators The Osmo Telescopic Handle can be used in conjunction with the following Osmo products: Osmo Floor Brush Osmo Floor Pad Holder Osmo Roller Frame Osmo Deck Cleaning Brush

    6 in stock

    £30.85

  • Osmo Micro-Mop Plush - Wiltshire Wood Flooring Supplies

    Osmo Micro-Mop Plush

    9 in stock

    A replacement Osmo Micro Mop Head for the Osmo Floor Cleaning Kit, which is ideal for the routine application of Osmo Wash and Care. The plush, soft fibres maintain finished surfaces without the wearing of product. Ideal for both domestic and commercial use.Please note: The Osmo Micro Mop should only be used for damp cleaning only, not wet.Features and Highlights A replacement microfibre mop head for use with Osmo Floor Cleaning Kit Suitable for varnish, stone, linoleum and other water resistant surfaces Perfect for the damp cleaning of wooden floors Quick and easy to use

    9 in stock

    £20.61

  • Osmo Roller Handle - Wiltshire Wood Flooring Supplies

    Osmo Roller Handle

    2 in stock

    Osmo roller frame only.

    2 in stock

    £7.83 - £9.88

  • Osmo Floor Roller Set - Wiltshire Wood Flooring Supplies

    Osmo Floor Roller Set

    3 in stock

    Suitable for all Polyx oils, clean with white spirit only. Set Includes  Tray with ridged area 3 disposable tray inserts Microfibre roller (250mm) Roller frame Applications OVERVIEW The Osmo Floor Roller and Tray Set is a complete kit which has been produced for the quick and easy application of floor finishes. It’s ideal for applying Osmo Wood Oils and other types of floor finishes. The roller frame can be attached to the Osmo Telescopic Handle (sold separately) for even greater ease of application. PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish.

    3 in stock

    £34.56

  • Osmo Dust Mop Head - Wiltshire Wood Flooring Supplies

    Osmo Dust Mop Head

    4 in stock

    The Osmo Dust Mop head is for use with the Osmo mop clean kit. Fantastic for removing dust, lint, fluff and animal hair. Easier to use and more energy saving than using a vacuum cleaner. Applications A replacement dust mop head for use with the Osmo Floor Cleaning Kit For the effective dry cleaning of wooden floors The ease of a broom combined with the efficiency of a vacuum cleaner Effectively collects dust, lint and animal hair Can be used to dry clean laminate and vinyl flooring

    4 in stock

    £20.28

  • Osmo Decking Cleaner 1L - Wiltshire Wood Flooring Supplies

    Osmo Decking Cleaner 1L

    17 in stock

    Highly effective cleaning power Osmo Decking Cleaner is a highly effective concentrate for cleaning untreated or oiled wooden decking and garden furniture. It is water soluble for quick, easy and thorough decking maintenance. Key Features  The surface becomes resistant against soiling and water. Approx. coverage : 30-100m²/L. Application SURFACE PREPARATION Remove loose debris from the surface with a firm broom/hand broom. METHOD OF APPLICATION Add Osmo Decking Cleaner to mop water (dosage depends on level of contamination, 1:25 up to max.1:1). Clean the wood along the wood grain with Osmo Decking Cleaning Brush.For a machine application, we recommend using Osmo Decking and Flooring Cleaning Machine.After cleaning, rinse with clear water. NOTE Avoid direct contact with ornamental and farm plants.To refresh/treat already greyed areas, we recommend using Osmo Wood Reviver Power-Gel. After the surface has dried, we recommend applying a pigmented Osmo Decking-Oil (e.g. Bangkirai-Oil or Larch-Oil).

    17 in stock

    £15.32

  • Osmo Wood Reviver Power-Gel (6609) With Decking Scrub Brush - Wiltshire Wood Flooring Supplies

    Osmo Wood Reviver Power-Gel (6609) With Decking Scrub Brush

    2 in stock

    Osmo Wood Reviver Power Gel is a gelatinous cleaner for refreshing and cleaning greyed wood in outdoor areas. A non-drip product that penetrates the wood deeply and remove the grey patina to refresh wood and restore the natural characteristics so the fresh, warm tone is visible again. It's easy to apply and reacts in as little as 20 minutes, it's also odourless and biodegradable. Key Features  • Non-drip • Restores the natural characteristic of weathered wood • Odourless Application  SURFACE PREPARATION Remove debris from greyed wood with a stiff brush or broom; afterwards dampen with water.Wood Reviver Power-Gel is ready to use. Do not thin.Perform a trial application before treating wood with Wood Reviver Power-Gel. METHOD OF APPLICATION Generously apply the gel along the wood grain. After approx. 20 minutes reaction time, clean surface with Osmo Decking Cleaning Brush and rinse with plenty of water. Avoid pressure / jest washers for cleaning as they can significantly increase absorbency of  some timbers ( eg soft timbers) . After drying for approx 2-3 days in clement weather conditions, protect the newly refreshed wood with a wood finish (e.g. for decks – Osmo Natural Oil Woodstain or Osmo Decking-Oils). Check the moisture content of the wood is less than 20% RM prior to applying an Osmo wood finish.For machine processing on decking, we recommend using the Osmo Wood Orbiter. NOTE Osmo Wood Reviver Gel is most effective when applied onto bare, untreated timber. Existing treatments may block the revival process – always trial apply first. Protect/cover sensitive surfaces such as: plants, metallic components ( eg aluminium), sensitive stones and renders. After treatment the dried wood may appear quite light in colour. The fully refreshed colour of the wood should be revealed following the application of an Osmo finishing oil

    2 in stock

    £46.38

  • Osmo Floor Maintenance Kit - Wiltshire Wood Flooring Supplies

    Osmo Floor Maintenance Kit

    Out of stock

    A professional, ready-to-use system for the maintenance of oiled wooden floors Suitable for softwood and hardwood flooring and perfect for floors finished with Osmo Polyx-Oil and other hard wax floor oils   Kit Contains  Wash and Care cleaning concentrate 1ltr Liquid Wax Cleaner Spray 0.4ltr Cloths 3 pcs, maintenance instructions Applications SURFACE PREPARATION It is recommended that floors should be dry swept or vacuumed prior to cleaning and maintaining to remove any loose dust, dirt and grit from the floor. APPLICATION Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the container at all times. Add Osmo Wash and Care to water (1 capful of Wash and Care per litre of water) Clean the floor with a damp (not wet) mop and wipe dry immediately If necessary, lightly sand out any stubborn stains or minor scuffs and scratches with the supplied abrasive pad Take care to ensure that any dust created from the abrasive pad is removed with a vacuum cleaner Next apply Liquid Wax Cleaner Spray evenly over the wood floor surface and massage into the wood using the specialised cleaning cloths provided When this cleaning system is applied regularly, it helps to keep floors resistant to dirt and signs of wear. For full instructions, refer to the Maintenance Instructions provided. CARE If floors cleaned with the Osmo Floor Maintenance Kit become dirty or dusty over time, simply repeat the steps laid out in the Preparation and Application sections above. Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner. Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

    Out of stock

    £36.96

  • Osmo Floor Brush - Wiltshire Wood Flooring Supplies

    Osmo Floor Brush

    11 in stock

    Make short work with large areas Made with 100% natural bristles with soft tips which gives fine control in achieving the desired effect and exceptional coverage capacities to produce professional looking results every time. With a high quality beech frame and a robust handheld green handle (see image) in 150, 220 and 400mm widths. Simply attach the extendable Osmo Telescopic Handle (sold separately) for applying in comfort. Applications    OVERVIEW Osmo Floor Brush is ideal for the application of Osmo floor oils to all wooden flooring. We recommend using it in conjunction with the Osmo Telescopic Handle for ease of application, especially for hard to reach areas. In addition to interior floors, the Osmo Floor Brush is perfect for applying Osmo decking oils and decking stains to wooden decking boards. This brush is also available as part of the Osmo Decking Brush Set. PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish. APPLICATION Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Any surplus should be removed immediately to ensure an even finish. AFTERCARE Osmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.

    11 in stock

    £32.01 - £58.00

  • Osmo Interior Spray Cleaner (8026) 500ml - Wiltshire Wood Flooring Supplies

    Osmo Interior Spray Cleaner (8026) 500ml

    Out of stock

    Osmo Interior Spray Cleaner (8026) 500ml can be used for any number of interior cleaning projects where a previously oiled or waxed wooden surface requires cleaning and maintaining.PreparationRemove any loose dust, dirt and grit from the surface of the wood to be cleaned with a soft, dry, lint-free or microfibre cloth before spraying.ApplicationAlways do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.Turn the spray nozzle to openSpray Osmo Spray Cleaner directly onto the wood surface, being careful not to over-saturate the surface of the woodWipe the surface with a clean, lint-free cotton or microfibre clothRepeat the process until the surface is cleanFeatures and Highlights A ready-to-use, water-based spray cleaner for oiled and waxed interior wood Ideal for wood worktops, doors, furniture & more Effectively cleans and moisturises the wood Maintains and protects the finish from wear Quick drying and easy to use Dries to a streak-free finish Low V.O.C

    Out of stock

    £10.64

  • Osmo Decking Brush Set - Wiltshire Wood Flooring Supplies

    Osmo Decking Brush Set

    18 in stock

    Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods. Key Features  For the optimal treatment of wooden decking. Both the decking brush and small brush enables good material absorption and even distribution for optimal finishing results. Contents: tray with ridged area, disposable tray inserts (3 pieces), Decking Brush (150 mm) and Flat Brush (25 mm). Can be used with or without Osmo Telescopic Handle, which is sold separately. Set Contains The Osmo Floor Brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use. The Osmo Decking Brush Set contains: 1 x 150mm Osmo Floor Brush for applying Osmo Decking Oil 1 x 25mm Osmo Soft Tip Brush for the hard to reach areas and for applying Osmo End Grain Sealing Wax 1 x handy-sized roller tray 3 x clear plastic tray inserts to make clearing up easy Applications  PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish. APPLICATION Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Any surplus should be removed immediately to ensure an even finish. AFTERCARE Osmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.

    18 in stock

    £36.36

  • Osmo Top Oil Surface kit (Matt Finish) - Wiltshire Wood Flooring Supplies

    Osmo Top Oil Surface kit (Matt Finish)

    2 in stock

    One set for all eventualities – fully equipped for the treatment of worktops and furniture made of wood.Initial care, maintenance and refreshing in one set: TopOil clear matt 500 ml Spray Cleaner 500 ml Hand Pad Holder Oil Finish Applicator Fleece Buffing fleece Care instructions

    2 in stock

    £42.82

  • Osmo Easy Clean Hand Wipes - Wiltshire Wood Flooring Supplies

    Osmo Easy Clean Hand Wipes

    17 in stock

    Osmo Easy Clean Hand Wipes are ideal for wiping away any excess product left on your hands after use, when there is no soap and water available. Exceptionally gentle on skin and leave hands feeling clean and fresh.A single hand wipe measures approximately 330mm x 165mm.   Applications  Damp cleansing hand wipes Effectively removes wax, oil, ink, tar, glue, bitumen and more Each pack contains approximately 15 hand wipes

    17 in stock

    £5.68

  • Osmo Active Fibre Cloth - Wiltshire Wood Flooring Supplies

    Osmo Active Fibre Cloth

    8 in stock

    Replacement Osmo Active Fibre Cloth for the Osmo Floor Cleaning Kit. Perfect for the easy cleaning and regeneration of wooden floors treated with Osmo oils. Recommended for the application of Osmo Liquid Wax Cleaner. Key Features Ideal for the care and maintenance of wooden flooring Replacement cloth head for the Osmo Floor Cleaning Kit Perfect for the application of Osmo Liquid Wax Cleaner

    8 in stock

    £13.22

  • Osmo Small Roller Tray Inserts - 100mm - Wiltshire Wood Flooring Supplies

    Osmo Small Roller Tray Inserts - 100mm

    4 in stock

    Pack of 10 tray inserts for Osmo roller, tray and brush set.

    4 in stock

    £14.56

  • Osmo Anti-Bac Wood Cleaner (8036) 5L - Wiltshire Wood Flooring Supplies

    Osmo Anti-Bac Wood Cleaner (8036) 5L

    3 in stock

    Osmo Anti-Bac Wood Cleaner (8036) 5L is ideal spray solution for everyday cleaning and maintenance – especially developed for oiled and waxed wood surfaces. Contains soaps based on natural oils to prevent the wood from drying out whilst cleaning. The water-soluble ingredients prevent streaks and do not form a layer. Especially mild on skin, free of dyes and aromas, biodegradable, free of solvents and emissions to ensure the surface remains food safe – supporting a healthy living environment.

    3 in stock

    £29.99

  • Osmo Floor Roller Tray Inserts - 250mm - Wiltshire Wood Flooring Supplies

    Osmo Floor Roller Tray Inserts - 250mm

    1 in stock

    Pack of 10 Tray inserts for the Osmo Floor roller set.

    1 in stock

    £23.36

  • Osmo Natural Oil Woodstain - Wiltshire Wood Flooring Supplies

    Osmo Natural Oil Woodstain

    2 in stock

    Osmo Natural Oil Woodstain is perfect for all exterior woods, including doors, windows & windowsills, carports, timber cladding, balcony, wooden decking, screens & smooth fences, pergolas, summer houses and garden furniture.Base and top coat in one finish. Key Features Fast Drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduce wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake  No sanding necessary for future applications  Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use.If possible, please apply the first coat to all sides before installation.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat.For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other.Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones.Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone.Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas.The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

    2 in stock

    £86.78

  • Osmo Garden Furniture Oil Clear Satin 028 1 Litre - Wiltshire Wood Flooring Supplies

    Osmo Garden Furniture Oil Clear Satin 028 1 Litre

    4 in stock

    Clear oil-based wood stain for all wood in outdoor areas. Microporous stain allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, extremely weatherproof and UV-stable. Will not crack, peel, flake or blister. Simply recoat without sanding or primer. Easy and seamless application. Wood stain stays workable while coating. Easy and seamless application Improves and maintains the appearance of wood Suitable for both hardwoods and softwoods Exceptionally high coverage Woodstain stays workable while coating Safe for humans, animals and plants once dry (biocide free) Highly water and dirt resistant Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating SURFACE PREPARATION Wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks. Pressure-impregnated wood, Massaranduba,Bangkirai or Garapa need to weather off for at least 3 months. De-grey any already greyed wood with Osmo Wood Reviver Power-Gel before applying Osmo Garden Furniture Oil. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Garden Furniture Oil is ready to use. Do not thin. Stir well before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. Always wear a dust mask while sanding. If possible, please apply the first coat to all sides before installation. If additional protection against blue stain, rot and insect attack is desired, pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With a stiff brush (Osmo Flat Brush) or a lint free cloth, apply thinly and evenly to the clean and dry wood surface. Always work with wood grain. Apply thinly and evenly. Ventilate well while drying. Then apply the second coat – also thinly. NOTE Osmo Garden Furniture Oil is clear; therefore it offers no UV protection (greying). Due to their surface properties, ribbed or rough saw wood surfaces absorb more product. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth) . Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

    4 in stock

    £28.82

© 2024 Wiltshire Wood Flooring Supplies,

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account