Free next working day delivery on all orders placed before 3pm

Osmo Polyx Oil Effect- Raw Matt (3044)

    Description

    Osmo Polyx-Oil Effect Raw is suitable for the protection and nearly invisible finish of all light-coloured interior woods, such as wooden floors and furniture.


    Key Features 

    • Nearly invisible appearance, no 'permanent wet effect'
    • Light coloured wood stays light coloured
    • Extremely durable and hardwearing
    • Very water and dirt resistant
    • Resistant to common liquid spillages such as water, juice, tea, cola and wine
    • Saliva-resistant and sweatproof, suitable for children's toys
    • Microporous, breathable finish which does not crack, peel or flake
    • No sanding necessary for spot repairs or future applications

    Application

     

    SURFACE PREPARATION

    Wood surface must be clean, dry and frost-free (moisture content max. 18%).
    Osmo Polyx®-Oil Effect Raw is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
    Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
    Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
    Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. Applying Polyx®-Oil Effect Raw over very textured or coarse surfaces could appear more white.

    The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

    METHOD OF APPLICATION

    With Osmo Flat Brush, Floor Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Applying excess Polyx®-Oil Effect Raw 3044 may lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry. Allow to dry for approx. 24 hours under good ventilation.
    After drying, quickly apply a second coat also thinly.
    When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.

    NOTE

    Polyx®-Oil Effect Raw is slightly white tinted and protects lighter coloured wood species nearly invisibly. On dark, reddish or ‘smoked / fumed’ wood species, Polyx®-Oil Effect Raw is visible as slightly white chalky surface. Applying excess Polyx®-Oil Effect Raw 3044 may also lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry.A trial application is recommended.

    Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.
    Any brushstrokes can be removed with an unused dry Microfibre Roller within 30 minutes after applying.

    For extractive rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.
    Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.

    Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.

    CARE

    Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.

    Occasional Maintenance: If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Spray cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.

    Recoating: When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.

    Product form

    SKU: MO-B8J8-5SJ7-SAMPLE

    Free pickup in our shop(s)

    £3.99 Incl. VAT

    7 in stock, and ready to ship!

        Description

        Osmo Polyx-Oil Effect Raw is suitable for the protection and nearly invisible finish of all light-coloured interior woods, such as wooden floors and furniture.


        Key Features 

        • Nearly invisible appearance, no 'permanent wet effect'
        • Light coloured wood stays light coloured
        • Extremely durable and hardwearing
        • Very water and dirt resistant
        • Resistant to common liquid spillages such as water, juice, tea, cola and wine
        • Saliva-resistant and sweatproof, suitable for children's toys
        • Microporous, breathable finish which does not crack, peel or flake
        • No sanding necessary for spot repairs or future applications

        Application

         

        SURFACE PREPARATION

        Wood surface must be clean, dry and frost-free (moisture content max. 18%).
        Osmo Polyx®-Oil Effect Raw is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.
        Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
        Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
        Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. Applying Polyx®-Oil Effect Raw over very textured or coarse surfaces could appear more white.

        The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

        METHOD OF APPLICATION

        With Osmo Flat Brush, Floor Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Applying excess Polyx®-Oil Effect Raw 3044 may lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry. Allow to dry for approx. 24 hours under good ventilation.
        After drying, quickly apply a second coat also thinly.
        When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient.

        NOTE

        Polyx®-Oil Effect Raw is slightly white tinted and protects lighter coloured wood species nearly invisibly. On dark, reddish or ‘smoked / fumed’ wood species, Polyx®-Oil Effect Raw is visible as slightly white chalky surface. Applying excess Polyx®-Oil Effect Raw 3044 may also lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry.A trial application is recommended.

        Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.
        Any brushstrokes can be removed with an unused dry Microfibre Roller within 30 minutes after applying.

        For extractive rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.
        Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.

        Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.

        CARE

        Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.

        Occasional Maintenance: If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Spray cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.

        Recoating: When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.

          Recently viewed products

          © 2024 Wiltshire Wood Flooring Supplies,

            • American Express
            • Apple Pay
            • Diners Club
            • Discover
            • Google Pay
            • Maestro
            • Mastercard
            • PayPal
            • Shop Pay
            • Union Pay
            • Visa

            Login

            Forgot your password?

            Don't have an account yet?
            Create account