Especially developed for the most demanding wooden floors treated with Osmo Polyx®-Oil for regular cleaning and occasional refreshing and maintenance. Floors with expected high tread and quick wear can be regenerated and cleaned at the same time with Maintenance Oil.

Key Features

Coverage - 40-60sqm A Litre Coats 1 coat
Drying Time 3-4 hours (23°C/50% R.H.).
Application to Small areas with A Cloth
Larger areas with A Scraper / Microfibre roller, then Buffing machine

Application

SURFACE PREPARATION

Wood surface must be clean, dry (moisture content max. 18 %) and free of dust.
Osmo Maintenance Oil is ready to use. Do not thin.
Stir well before use.
Clean the surface thoroughly with Osmo Intensive Cleaner and rinse (damp mopping) with clear water.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

METHOD OF APPLICATION

With Osmo Double Blade Scraper or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad (do not rub in 3098). Remove excess product.
For smaller areas, Osmo Maintenance Oil can be applied with a lint-free cloth.
Allow for good ventilation while drying.

NOTE

The maintenance results are influenced by several factors, including the condition of wood. Therefore, a trial application is always required. If wood is raw or already greyed, the surface must be sanded and treated with Osmo Polyx®-Oil. Do not rub in Maintenance Oil 3098 Semi-Matt/Anti-Slip with a single disc machine.