Wood Floor Adhesives

OSMOUK MS Trade is a one component adhesive specially formulated for the interior installation of parquet block, engineered wood plank as well as pre-finished and unfinished solid wood flooring. Solvent and isocyanate free, with negligible VOC content and low odour. Thanks to the special formulation the adhesive has great early strength build for immediate grab and quickly builds to a tenacious but elastic bond as the adhesive continues to cure.  Specifications  Approx. coverage: up to 18m² Application climate: 15-30°C, 30-60% RH Size: 15KG Suitable for use with under floor heating 100% solids and low odour Water and solvent free Isocyanate free High strength Waterproof bond Early quick grab Meets environmental emissions according to DIBt

Read more less

Bona R848 is an elastic, 1-component silane wood floor adhesive. A high performance formulation that is ideal for the installation of engineered wood flooring including engineered parquet flooring. Can also be used for solid boards up to 190mm wide.KEY BENEFITS Easy to apply Fast initial bonding strength Allows load after 24 hours Up to two years' shelf life Great rib stability Compatible with underfloor heating Coverage dependant on trowel used 850 - 1250G Tensions to the sub floor are reduced. The adhesive hardens by a chemical reaction with moisture. Suitable subfloors; timber and screed Cementitious screed (CT) according to EN 13813 Floors levelled with levelling compounds (at least 2 mm thick, resistant against plasticizer migration) Calcium sulfate screed (CA) according to EN 13813 Chipboard V100 Other dry and sound sub floors Floor Preparation Subfloor preparation should be in accordance with British Standard.

Read more less

Bona R848T Flexible Wood Flooring Adhesive 600ml Sausage is an Elastic, 1 component silane parquet adhesive. R848T has a higher viscosity than R848. It feels thicker and has an improved initial grab, which reduces the risk of hollow spots. The adjusted formulation makes the adhesive well suitable for the installation of solid strip floors and engineered and mosaic parquet.KEY BENEFITS Easy to apply Fast initial bonding strength allows load after 24 hrs Up to two years of shelf life Higher viscosity, improved rib stability CoverageIf used with a trowel 1 sausage will cover approximately 1m2 If used as a baton system with 200mm centres between batons 1 sausage will cover approximately 1.5m2

Read more less

A hard-elastic, 1-component silane wood flooring adhesive. A true all rounder suitable for practically all types of wood flooring and subfloors, in particular solid and wide engineered wood floors. Its hard-elastic properties make it strong and resistant against movement of wood while relieving tension on the sub floor. Key Benefits Fast initial bonding strength allows load after 24 hours Up to two years' shelf life Great rib stability Can be used on outdoor decks Direct use on tiles and metal Compatible with underfloor heating Coverage dependant on trowel size : 850 - 1500g/m2 Product Advantages Adhesive hardens due to a chemical reaction with moisture. Technical Spec Open time: Approx 40mins* Drying time, until: - Application of load: 24-48hrs Under normal climate conditions, 20°C/60% R.H. Note: Please also refer to the instructions for use provided by the parquet manufacturer. Application Before using the adhesive the following climatic conditions must be met: Air temperature: min. 18°C Floor temperature: min. 15°C (with underfloor heating max. 20°C) R.H: max. 70 %- The adhesive itself must, if necessary, be brought to the right temperature. Apply with a or notched trowel

Read more less

Bona Quantum Flexible Wood Flooring Adhesive 600ml Sausage is a high viscosity adhesive made for gun application. Rapid setting, the hardened adhesive has a firm texture and can be used on nearly all sub floors. Key Benefits Fast initial bonding strength allows load after 24 hours Up to two years' shelf life Great rib stability Can be used on outdoor decks Direct use on tiles and metal Compatible with underfloor heating Coverage dependant on trowel size : 850 - 1500g/m2 Product Advantages Adhesive hardens due to a chemical reaction with moisture. Technical Spec Open time: Approx 40mins* Drying time, until: - Application of load: 24-48hrs Under normal climate conditions, 20°C/60% R.H. Note: Please also refer to the instructions for use provided by the parquet manufacturer. Application Before using the adhesive the following climatic conditions must be met: Air temperature: min. 18°C Floor temperature: min. 15°C (with underfloor heating max. 20°C) R.H: max. 70 %- The adhesive itself must, if necessary, be brought to the right temperature. Apply with Bona glue trowel or Application gun.

Read more less

Lecol 5500 Parquet Flooring Adhesive is solvent-based and can be used for all types of wood. It is suitable for installation on absorbent and non-absorbent sub-floors meaning that it can be universally applied. In many cases Lecol 5500 can even be used to install pre-finished parquet without any problems. Our customers consistently report first class results with Lecol 5500 and it comes highly recommended by Professionals. Key Features  Lecol 5500 Parquet Adhesive is ready to use Very strong adhesion Excellent filling properties High level of initial grab Lecol 5500 can be used with underfloor heating  Lecol 5500 is widely used by professional floor fitters Coverage: 0.9kg per m2 Universally applicable Economical application Available in 6kg and 16kg tin. Application with Glue Trowel 

Read more less

Water-based Dispersion PVAC Adhesive. Lecol PVAC glue is a water-based dispersion glue which guarantees a durable adhesion. Lecol PVAC glue is a quick polyvinylacetate based glue and has a high shear strength. Lecol PVAC glue corresponds to the requirements of Class Norm EN 204. Thinner: Ready for use. (can be mixed with water). The tools can be cleaned with water, dried glue with acetone. Consumption: approx. 120 - 200 Gr/m² Open time: approx. 5 -7 minutes. The glue must dry for at least 12 hours.Storage: Do not use at a temperature below +10°C, Do not store below +5°C, Protect from frost. Shelf life approx 6 months. Application Especially suitable for glueing laminate and floor elements. The glue should applied at room temperature (20°C) to the groove from end to end. Press the panelstogether firmly to ensure a tight fit. Use a wooden block to prevent damage to the tongue. The open time of Lecol PVAC glue is approx 5-7 minutes, depending on the temperature.The average drying time of the glue is about 30 minutes. Excess glue should be removed immediately with a towel, before it dries. Open containers should be resealed immediately and stored correctly.

Read more less

OSMOUK Fast Adhesive 200ml + 50g is a 2 part fast set adhesive. High bonding strength, dries within seconds Suitable for use on MDF, wood, chipboard, rubber, most plastics, leather, perspex, PVC, ceramics, aluminium and metals. Ideal for fixing workshop end-strips, picture frames, profile mitres, architrave joints, PVC trims and more. Non-drip formula makes it suitable for any structure. Suitable for bonding items that have a rough or uneven surface. Especially suitable for the applications where cure speed needs to be accelerated Very easy application Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates.

Read more less

The Osmo MS Advance 600ml Sausage is a cross linking, MS polymer-based wood floor adhesive formulated for the installation of interior wood block parquet, engineered wood plank, acrylic impregnated plank, bamboo and pre-finished and unfinished solid wood flooring. Osmo MS Advance Wood Flooring Adhesive in a convenient 600ml sausage High strength, waterproof bond Early quick-grab formula Ready-to-use, no mixing required Remains flexible, enabling seasonal expansion and contraction of floor boards Moisture inhibitor and sound reducing properties Modified silane polymer chemistry 100% solids Low odour Water, solvent and isocyanate-free

Read more less