Noise Reducing Wood flooring & Laminate Underlay Duralay Timbermate Excel is part of the Timbermate Range of underlays along with Silentfloor Gold perfectly designed for engineered wood flooring and laminate flooring. Timbermate Excel reduces in-room noise by up to 30% and contains our Vapourstop barrier to help prevent moisture. Independently tested to produce a sound reduction rating of 56 SONE 3.60mm gauge high density resilient rubber underlay Vapourstop barrier that helps prevent moisture Prevents the overstraining of wood and laminate boards Suitable for use on most subfloor types including screed and suspended timber floors Provides an excellent sub-floor masking minor surface imperfections Simple, quick and easy to install Available in 10sqm and 15sqm rolls It’s recommended for the joints to be taped together, we recommend our vapour tape.
£63.50 - £80.53
A self adhesive seaming tape that creates an effective moisture barrier with improved joint seal protection and also strengthens underlay joints. Single units available in store only.
Bona R848 is an elastic, 1-component silane wood floor adhesive. A high performance formulation that is ideal for the installation of engineered wood flooring including engineered parquet flooring. Can also be used for solid boards up to 190mm wide.KEY BENEFITS Easy to apply Fast initial bonding strength Allows load after 24 hours Up to two years' shelf life Great rib stability Compatible with underfloor heating Coverage dependant on trowel used 850 - 1250G Tensions to the sub floor are reduced. The adhesive hardens by a chemical reaction with moisture. Suitable subfloors; timber and screed Cementitious screed (CT) according to EN 13813 Floors levelled with levelling compounds (at least 2 mm thick, resistant against plasticizer migration) Calcium sulfate screed (CA) according to EN 13813 Chipboard V100 Other dry and sound sub floors Floor Preparation Subfloor preparation should be in accordance with British Standard.
Bona R848T Flexible Wood Flooring Adhesive 600ml Sausage is an Elastic, 1 component silane parquet adhesive. R848T has a higher viscosity than R848. It feels thicker and has an improved initial grab, which reduces the risk of hollow spots. The adjusted formulation makes the adhesive well suitable for the installation of solid strip floors and engineered and mosaic parquet.KEY BENEFITS Easy to apply Fast initial bonding strength allows load after 24 hrs Up to two years of shelf life Higher viscosity, improved rib stability CoverageIf used with a trowel 1 sausage will cover approximately 1m2 If used as a baton system with 200mm centres between batons 1 sausage will cover approximately 1.5m2
Bona Quantum Flexible Wood Flooring Adhesive 600ml Sausage is a high viscosity adhesive, based on Bona Quantum, made for gun application. Rapid setting, the hardened adhesive has a firm texture and can be used on nearly all sub floors.
A hard-elastic, 1-component silane wood floor adhesive. A true all rounder suitable for practically all types of wood flooring and subfloors, in particular solid floors. Its hard-elastic properties make it strong and resistant against movement of wood while relieving tension on the sub floor. Key Benefits Fast initial bonding strength allows load after 24 hours Up to two years' shelf life Great rib stability Can be used on outdoor decks Direct use on tiles and metal Compatible with underfloor heating Coverage dependant on trowel: 850 - 1500g/m2 Product Advantages Adhesive hardens due to a chemical reaction with moisture. Technical Spec Open time: Approx 40mins* Drying time, until: - Application of load: 24-48hrs Under normal climate conditions, 20°C/60% R.H. Note: Please also refer to the instructions for use provided by the parquet manufacturer. Application Before using the adhesive the following climatic conditions must be met: Air temperature: min. 18°C Floor temperature: min. 15°C (with underfloor heating max. 20°C) R.H: max. 70 %- The adhesive itself must, if necessary, be brought to the right temperature. Apply with a or notched trowel
OSMOUK MS Trade is a one component adhesive specially formulated for the interior installation of parquet block, engineered wood plank as well as pre-finished and unfinished solid wood flooring. Solvent and isocyanate free, with negligible VOC content and low odour. Thanks to the special formulation the adhesive has great early strength build for immediate grab and quickly builds to a tenacious but elastic bond as the adhesive continues to cure. Specifications Approx. coverage: up to 18m² Application climate: 15-30°C, 30-60% RH Size: 15KG Suitable for use with under floor heating 100% solids and low odour Water and solvent free Isocyanate free High strength Waterproof bond Early quick grab Meets environmental emissions according to DIBt
A primer designed for use over absorbent and non-absorbent substrates (with the exception of magnesium industrial floors) and for chipboard panels. All Bona silane adhesives can be applied over D501 after just one hour.A primer designed for use over absorbent and non-absorbent substrates (with the exception of magnesium industrial floors) and for chipboard panels. All Bona silane adhesives can be applied over D501 after just one hour.FEATURES Vapour permeable Binds residual dust Solvent-free Very quick drying Compatible with underfloor heating Coverage 50 Sqm Drying Time 1-2hrs Application Roller, Brush
Lecol 5500 Parquet Flooring Adhesive is solvent-based and can be used for all types of wood. It is suitable for installation on absorbent and non-absorbent sub-floors meaning that it can be universally applied. In many cases Lecol 5500 can even be used to install pre-finished parquet without any problems. Our customers consistently report first class results with Lecol 5500 and it comes highly recommended by Professionals. Advantages of Lecol 5500 include: Lecol 5500 Parquet Adhesive is ready to use Very strong adhesion Excellent filling properties High level of initial grab Lecol 5500 can be used with underfloor heating - see below Lecol 5500 is widely used by professional floor fitters Universally applicable Economical application Supplied in a 16kg tin.
£61.10 - £121.12
Water-based Dispersion PVAC Adhesive. Lecol PVAC glue is a water-based dispersion glue which guarantees a durable adhesion. Lecol PVAC glue is a quick polyvinylacetate based glue and has a high shear strength. Lecol PVAC glue corresponds to the requirements of Class Norm EN 204. Thinner: Ready for use. (can be mixed with water). The tools can be cleaned with water, dried glue with acetone. Consumption: approx. 120 - 200 Gr/m² Open time: approx. 5 -7 minutes. The glue must dry for at least 12 hours.Storage: Do not use at a temperature below +10°C, Do not store below +5°C, Protect from frost. Shelf life approx 6 months. Application Especially suitable for glueing laminate and floor elements. The glue should applied at room temperature (20°C) to the groove from end to end. Press the panelstogether firmly to ensure a tight fit. Use a wooden block to prevent damage to the tongue. The open time of Lecol PVAC glue is approx 5-7 minutes, depending on the temperature.The average drying time of the glue is about 30 minutes. Excess glue should be removed immediately with a towel, before it dries. Open containers should be resealed immediately and stored correctly.
Absorbent Concrete, sand/cement screed, plywood, hardwood and chipboard.Non-absorbent Terrazzo, steel, galvanised steel, waterproof surface membranes, epoxy, polyurethane and existing adhesive residue.Neoprene emulsion primer to promote adhesion of Stopgap smoothing underlays to both absorbent and non-absorbent surfaces. Designed to prevent rapid drying of adhesives and smoothing underlays.
F Ball Stopgap 1200 Pro Bag & Bottle 20kg. F Ball Stopgap 1200 Powder Mixed with Liquid is a low odour, fast setting, fast drying, two component smoothing underlayment suitable for preparing sound internal subfloors prior to the installation of new floor coverings. It is particularly suitable for use over old adhesive residues (including bitumen and carpet tile tackifiers) without the need for priming. STOPGAP 1200 can be used for patch filling timber floors prior to overlaying with plywood. It is suitable for use in clinical and biologically sensitive areas, clean rooms etc. STOPGAP 1200 mixed with STOPGAP 1200 Liquid has been tested in accordance with IMO 2010 FTPC Part 5 (IMO Res. MSC 307(88)) and Annex 2 item 2.2 and approved for use in marine application by DNV. Suitable direct to adhesive residues, carpet tile tackifier and waterproof surface membranes Lay floor coverings from 4 hours Application thickness from 2 - 10mm Can be filled up to 30mm Fast setting Protein Free Excellent self levelling properties Suitable for use in clinical areas Approx coverage of 1.98kg/m²
Stopgap 300 Powder Mixed with Water A rapid hardening, water mix smoothing underlayment. It is designed for use on both absorbent and non-absorbent interior subfloors, in areas that are subjected to heavy-duty trafficking.The underlayment has excellent smoothing properties making it suitable for application by mechanical pump or by traditional mixing methods. It is protein free ensuring it is suitable for biologically sensitive areas. For thickness above 10mm, Stopgap Graded Aggregate is recommended for economy.
Stopgap 700 Powder Mixed with Water Fast drying, flexible, fibre-reinforced self-smoothing underlayment, designed specifically for use over plywood. Based on the latest advances in cement and polymer technology, enabling fast track application prior to the installation of new floorcoverings. Can be applied between 2mm and 10mm to a wide range of subfloor types. Due to fast drying technology it is ready to receive most floorcoverings in as little as 3 hours. Marine CertifiedTested to the standards of the International Marine Organisation and approved for use in marine floor installations. Gauging Liquid - Water Subfloor Type - Plywood Surfaces and Suitably Prepared Steel Subfloors, including Raised Access Floors
Ardex A45 is a rapid drying and hardening, slump free mortar for internal repairs. Receives finishes after 90 minutes regardless of thickness Slump free ideal for vertical and horizontal repairs Ideal for the rapid repair of internal concrete, screeds, renders and concrete steps Other applications include forming ramps, falls and coves, patching around fittings/pipework, and filling cracks and gaps.
Acrylic primer designed to promote adhesion of STOPGAP levelling compounds to non-absorbent subfloors. STOPGAP P141 contains recycled uPVC pulver that dries to a hard, textured surface to enhance bond performance. STOPGAP P141 is recommended when applying STOPGAP 600 over non-absorbent surfaces at thicknesses over 20mm. It is suitable for use over normal underfloor heating and is pigmented yellow for visual control of coverage uniformity.
STOPGAP P121 is an acrylic primer designed to promote the application characteristics of STOPGAP 1100 GYPSUM, and other suitable STOPGAP smoothing underlayments, to calcium sulphate screeds e.g. anhydrite. It prevents unacceptably rapid drying of adhesives and smoothing underlayments. It is non-flammable and suitable for use over normal underfloor heating installations. STOPGAP P121 is coloured blue to provide the user with visual control of coverage uniformity.
Bona R410 is a solvent and water-free, 2-component epoxy resin, suitable for damp proofing concrete or cement subfloors, or for use as a primer prior to the application of a suitable adhesive or levelling compound. Two coats are required when used as a damp proofer allow 3 hours between coats. Drying time: 24 hours. KEY BENEFITS Excellent adhesion to many substrates Application possible with a paint roller, brush or trowel Isolates bitumen residue Compatible with underfloor heating Coverage as a primer: 20m2 Coverage as a damp proofer: 10m2 Moisture suppression up to 90% RH / 5% moisture content