A deck cleaning brush for cleaning wooden decking boards Designed for use with Osmo Wood Reviver Gel The Osmo Decking Cleaning Brush is perfect for cleaning wooden garden decking and it is designed to be used with Osmo Wood Reviver Gel. This decking brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use.
Osmo Decking-Oils protect and maintain timber decking, garden furniture and privacy screens made of numerous coniferous and fine woods, such as pressure impregnated Pine, Douglas Fir, Cedar, Oak or Bangkirai also suitable as a transparent colour treatment of Teak, Eucalyptus and other fine woods as well as thermally treated wood. Key Features Approx. coverage: 24m²/L with one coat No. of coats: 2 Ideal application temperature: +10°C to 35°C Drying time: 12 hrs Sizes: 0.125L, 0.750L, 2.5L Application For a clear and natural finish for decking, apply just two coats of 007 Teak Oil, which allows the wood to naturally grey over time. The darker the colour, the slower the greying process of the wood will start to appear. Osmo Anti-Slip Decking Oil 430 can be used as the second coat after any of the coloured Decking Oils to provide a slip resistant surface. Recommended application is 35ml/m² SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding.If possible, and if the wood is absorbent please apply the first coat to all sides before installation.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain.For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing.Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying.Once dry apply the second coat – also thinly.If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. NOTE Osmo Teak-Oil 007 is a clear decking oil finish and therefore offers only little protection against UV radiation (greying).As a clear top coat for fence panels / screens, we recommend Osmo UV-Protection-Oil/UV-Protection-Oil Extra. For decking the clear Anti-Slip Decking Oil 430 should be applied over 1 x coat of a coloured Osmo Decking Oil. Clear Anti-Slip Decking oil 430 offers higher pigment protection which increases the durability of the finish against wear and weather.For especially mechanically loaded areas (e.g. decking), we recommend checking the finish at least once a year and to eventually recoat the surface with the appropriate finish.Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces.Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. Using jet/power washers or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with diluted Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth). Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
£22.40 - £82.07
Highly effective cleaning power Osmo Decking Cleaner is a highly effective concentrate for cleaning untreated or oiled wooden decking and garden furniture. It is water soluble for quick, easy and thorough decking maintenance. Key Features The surface becomes resistant against soiling and water. Approx. coverage : 30-100m²/L. Application SURFACE PREPARATION Remove loose debris from the surface with a firm broom/hand broom. METHOD OF APPLICATION Add Osmo Decking Cleaner to mop water (dosage depends on level of contamination, 1:25 up to max.1:1). Clean the wood along the wood grain with Osmo Decking Cleaning Brush.For a machine application, we recommend using Osmo Decking and Flooring Cleaning Machine.After cleaning, rinse with clear water. NOTE Avoid direct contact with ornamental and farm plants.To refresh/treat already greyed areas, we recommend using Osmo Wood Reviver Power-Gel. After the surface has dried, we recommend applying a pigmented Osmo Decking-Oil (e.g. Bangkirai-Oil or Larch-Oil).
Bona Decking Oil provides outdoor decking with long-lasting protection against all forms of weather, from snow to sunlight. Its unique formula enhances the natural wood grain, while reducing the risk for cracking and warping. It also contains UV protection against bleaching. With easy application and quick drying, it is the perfect partner for outdoor decking protection. Base: Modified vegetable oils Category: Hardening oil, 1-comp Drying time (until use): 24 h Application tools: Wide brush or mohair roller Coverage: Approx. 20m ½/litre
Osmo Wood Reviver Power Gel is a gelatinous cleaner for refreshing and cleaning greyed wood in outdoor areas. A non-drip product that penetrates the wood deeply and remove the grey patina to refresh wood and restore the natural characteristics so the fresh, warm tone is visible again. It's easy to apply and reacts in as little as 20 minutes, it's also odourless and biodegradable. Key Features • Non-drip • Restores the natural characteristic of weathered wood • Odourless Application SURFACE PREPARATION Remove debris from greyed wood with a stiff brush or broom; afterwards dampen with water.Wood Reviver Power-Gel is ready to use. Do not thin.Perform a trial application before treating wood with Wood Reviver Power-Gel. METHOD OF APPLICATION Generously apply the gel along the wood grain. After approx. 20 minutes reaction time, clean surface with Osmo Decking Cleaning Brush and rinse with plenty of water. Avoid pressure / jest washers for cleaning as they can significantly increase absorbency of some timbers ( eg soft timbers) . After drying for approx 2-3 days in clement weather conditions, protect the newly refreshed wood with a wood finish (e.g. for decks – Osmo Natural Oil Woodstain or Osmo Decking-Oils). Check the moisture content of the wood is less than 20% RM prior to applying an Osmo wood finish.For machine processing on decking, we recommend using the Osmo Wood Orbiter. NOTE Osmo Wood Reviver Gel is most effective when applied onto bare, untreated timber. Existing treatments may block the revival process – always trial apply first. Protect/cover sensitive surfaces such as: plants, metallic components ( eg aluminium), sensitive stones and renders. After treatment the dried wood may appear quite light in colour. The fully refreshed colour of the wood should be revealed following the application of an Osmo finishing oil
Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods. Key Features For the optimal treatment of wooden decking. Both the decking brush and small brush enables good material absorption and even distribution for optimal finishing results. Contents: tray with ridged area, disposable tray inserts (3 pieces), Decking Brush (150 mm) and Flat Brush (25 mm). Can be used with or without Osmo Telescopic Handle, which is sold separately. Set Contains The Osmo Floor Brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use. The Osmo Decking Brush Set contains: 1 x 150mm Osmo Floor Brush for applying Osmo Decking Oil 1 x 25mm Osmo Soft Tip Brush for the hard to reach areas and for applying Osmo End Grain Sealing Wax 1 x handy-sized roller tray 3 x clear plastic tray inserts to make clearing up easy Applications PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish. APPLICATION Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Any surplus should be removed immediately to ensure an even finish. AFTERCARE Osmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.