Bona R410 is a solvent and water-free, 2-component epoxy resin, suitable for damp proofing concrete or cement subfloors, or for use as a primer prior to the application of a suitable adhesive or levelling compound. Two coats are required when used as a damp proofer allow 3 hours between coats. Drying time: 24 hours. KEY BENEFITS Excellent adhesion to many substrates Application possible with a paint roller, brush or trowel Isolates bitumen residue Compatible with underfloor heating Coverage as a primer: 20m2 Coverage as a damp proofer: 10m2 Moisture suppression up to 90% RH / 5% moisture content
Absorbent Concrete, sand/cement screed, plywood, hardwood and chipboard.Non-absorbent Terrazzo, steel, galvanised steel, waterproof surface membranes, epoxy, polyurethane and existing adhesive residue.Neoprene emulsion primer to promote adhesion of Stopgap smoothing underlays to both absorbent and non-absorbent surfaces. Designed to prevent rapid drying of adhesives and smoothing underlays.
A primer designed for use over absorbent and non-absorbent substrates (with the exception of magnesium industrial floors) and for chipboard panels. All Bona silane adhesives can be applied over D501 after just one hour.A primer designed for use over absorbent and non-absorbent substrates (with the exception of magnesium industrial floors) and for chipboard panels. All Bona silane adhesives can be applied over D501 after just one hour.FEATURES Vapour permeable Binds residual dust Solvent-free Very quick drying Compatible with underfloor heating Coverage 50 Sqm Drying Time 1-2hrs Application Roller, Brush
STOPGAP P121 is an acrylic primer designed to promote the application characteristics of STOPGAP 1100 GYPSUM, and other suitable STOPGAP smoothing underlayments, to calcium sulphate screeds e.g. anhydrite. It prevents unacceptably rapid drying of adhesives and smoothing underlayments. It is non-flammable and suitable for use over normal underfloor heating installations. STOPGAP P121 is coloured blue to provide the user with visual control of coverage uniformity.
Acrylic primer designed to promote adhesion of STOPGAP levelling compounds to non-absorbent subfloors. STOPGAP P141 contains recycled uPVC pulver that dries to a hard, textured surface to enhance bond performance. STOPGAP P141 is recommended when applying STOPGAP 600 over non-absorbent surfaces at thicknesses over 20mm. It is suitable for use over normal underfloor heating and is pigmented yellow for visual control of coverage uniformity.