Products

The Leica Disto X3 is perfect for tough construction site conditions. It is drop-tested up to 2m in height, water jet and dust protected to IP 65 standards. The new Leica Disto X3 technologies in combination with the Smart Room function of the Leica Disto Plan App allow you to quickly create scaled floor plans on your smartphone or tablet. It's designed to withstand for toughest construction site conditions, with a solid rubber housing it's really robust and waterproof.Includes: Dimensions: 132 x 56 x 29mm Holster and hand loop 1.0mm accuracy 2 x AA batteries supplied Range: 0.05-150m

Read more less

A range of fast drying alcohol-based stains suitable for spray, dip and hand application. Formulated to provide excellent grain definition and depth of colour on all wooden substrates including floors. Morrells Light Fast Wood Stain are non-grain raising and resist colour fading due to light fast pigments. Morrells Light Fast Wood Stains are professional products appropriate for all interior wood applications. Application instructions can be found in the data sheet. Morrells Light Fast Wood Stains must be sealed with a lacquer, such as Bona Lacquers, to seal in and protect the colour. Pack size: 1L, 5L Touch dry: 15 - 30 minutes @ 18°C Recoatable: 15 - 30 minutes @ 18°C. For flooring, 2 hours minimum before sealer/topcoat Coats: 1 - 2 Coverage: 8 - 12m² per litre dependent upon the size, orientation and surface quality of the item being coated Packing: Overnight minimum dependent on the conditions

Read more less

A range of ready-for-use water-based wood fillers developed for filling pin holes, nail holes and other small imperfections on wood for internal use. They are formulated to be applied by either knife or scraper and are available in a variety of colours. The standard range consists of a selection of the most widely used wood colours. Formulated on a careful selection of quality raw materials, they have good adhesion and anchorage properties coupled with minimal shrinkage and absorption. They are quick drying with excellent sanding properties. For hand application the softer 47 – Hand Stopper is recommended. This one-part wood filler cannot be used for repairing damaged edges, corners and other more significant damages, however Morrells Two-Part Wood Filler can be used for such repairs. Application Apply the one part wood filler directly on to the timber using a knife or scraper Apply the one part wood filler in slight excess to allow for shrinkage during drying Deep holes should not be filled with the one part wood filler in a single operation due to the risk of excessive shrinkage and crumbling of the dried filler Leave to dry overnight for thorough hardening Sand away excess dried filler with 180-240g water-lubricated sandpaper Surface is now prepared for normal finishing Drying: Overnight Equipment cleaning: Hot water

Read more less

  The Morrells range of SCANDI stains has been inspired by Nordic design and consists of classic wood shades and contemporary pigmented colours. All are lightfast and suitable for wooden substrates. Formulated to provide excellent grain definition and depth of colour while maintaining lightfastness. SCANDI pigmented stains have been designed with a longer drying time to better suit rag-on-rag-off applications, allowing greater control of colour and grain definition. Suitable for tinting pre-catalyst lacquers up to a maximum of 5% by volume. For flooring applications, a minimum of 2 hours to dry must be given before sealing and topcoating. Drying and recoat time will vary with temperature, humidity and absorption of the timber. SCANDI stains must be topcoated. If topcoating with manually-applied flooring lacquer, use waterbased products only. Preparation Ensure surface is clean, dry and free from old finishes, dust, dirt, oil and other contaminants. Pre-sand with 180 grit sand paper prior to stain application to avoid patchy or uneven drying. Test patch It is advisable to test the colour in an inconspicuous area or on a spare piece of substrate.  Note The SCANDI range contains pigments that will settle with time. Ensure the stain is thoroughly mixed before use and at regular intervals to ensure consistent colour. Hand staining Use a soft, white, lint-free cloth. Avoid using coloured or printed rags as dyes can bleed into the stain and cause discolouration. Apply the stain wet to the whole surface to avoid uneven penetration and then remove excess with a clean cloth. For larger surfaces it may be appropriate to apply the stain in sections. When removing excess stain, work with the direction of grain. Spray application Spray apply an even wet coat Remove excess with a soft, white, lint-free cloth, working with the direction of the grain. Wiping off process can enhance the evenness of the colour and highlight the grain definition and the natural figuring of the substrate.  Dip application Plunge or controlled dip can be undertaken Wipe off excess stain with a clean, white, lint-free cloth, working with the direction of the grain. Pack size: 1L, 5L, 25L Touch dry: 60 minutes @ 18°C Recoatable: 60 minutes @ 18°C Coats: 1-2 Coverage: 8m² per litre dependent upon the size, orientation and surface quality of the item being coated Packing: Overnight minimum dependent on the conditions

Read more less

Bona Wood Floor Cleaner cartridge is for use with the Bona Wood Floor Spray Mop. It is specifically designed to remove dust, dirt and grime safely from wood floors. Its ready-to-use formula dries quickly, and doesn't leave a residue behind.

Read more less

Bona Cleaner for Oiled Floors is an easy, safe and effective cleaner for oiled wooden floors that simultaneously cleans and nourishes the oiled finish for increased protection. This handy refill cartridge is for use with the Bona Oiled Floor Spray Mop or any of the other Bona Spray Mops. Can be easily topped up with Bona Cleaner Refill for Oiled Floors.

Read more less

The Bona Oiled Floor Spray Mop is an effective and easy-to use spray mop for oiled wooden flooring. It comes complete with an 850ml refill cartridge containing Bona Cleaner for Oiled Floors and a machine washable microfibre cleaning pad.Dry sweep or vacuum floors before wet cleaning to ensure that any dirt and grit is removed to avoid scratches.The Bona Spray Mop for Oiled Floors comes in five sections that are easily assembled. Instructions are supplied on the box. The two handle pieces are connected by a green slide up sleeve. This is tight fitting and may require some force to click into place.

Read more less

Please contact us for Prices and availability. Sold per pack 1.44m2 Description  Natural Oiled Rustic Oak Engineered Plank  Product specification Finish Natural Oiled  Type Real Wood Engineered plank Width & Length 190 x 1900mm Total Thickness 20mm Top Layer 6mm Solid European Oak Grade ABCD Rustic Core Layer Multi ply Pack Size 1.44m2  Pack Contents 4 Planks - May Include 2 Split Planks  Joint Type Tongue Groove Bevelled Edges 4 Sides Floated Installation  yes Fully Bonded Installation  Yes Secret Nailed Installation  Yess Suitable For Underfloor Heating Yes Tog Rating 1.13 Hardness  Hard

Read more less

Complete application kit especially recommended for applying Osmo oil-based wood finishes onto both small and large areas of rough sawn, untreated or planed wood. Ergonomically shaped for fatigue-free work with optimal product absorption, allowing for an even distribution of product for the highest possible coverage. Key Features  Ideal for corners and edges User-friendly and easy to use Roller can be attached to Telescopic Handle Premium quality Suitable for both DIY and professional users Disposable trays

Read more less

Replacement Osmo Active Fibre Cloth for the Osmo Floor Cleaning Kit. Perfect for the easy cleaning and regeneration of wooden floors treated with Osmo oils. Recommended for the application of Osmo Liquid Wax Cleaner. Key Features Ideal for the care and maintenance of wooden flooring Replacement cloth head for the Osmo Floor Cleaning Kit Perfect for the application of Osmo Liquid Wax Cleaner

Read more less

Osmo Anti-Bac Wood Cleaner (8036) 5L is ideal spray solution for everyday cleaning and maintenance – especially developed for oiled and waxed wood surfaces. Contains soaps based on natural oils to prevent the wood from drying out whilst cleaning. The water-soluble ingredients prevent streaks and do not form a layer. Especially mild on skin, free of dyes and aromas, biodegradable, free of solvents and emissions to ensure the surface remains food safe – supporting a healthy living environment.

Read more less

Osmo Anti-Bac Wood Cleaner Spray 8036 500ml is a highly effective cleaning – Kills bacteria & viruses, Maintains protected surfaces without wear of treatment, Easy to use, simply spray and wipe clean, Suitable for domestic and commercial use. Ideal for all wooden surfaces treated with hardwaxes Ideal spray solution for everyday cleaning and maintenance – especially developed for oiled and waxed wood surfaces. Contains soaps based on natural oils to prevent the wood from drying out whilst cleaning. The water-soluble ingredients prevent streaks and do not form a layer. Especially mild on skin, free of dyes and aromas, biodegradable, free of solvents and emissions to ensure the surface remains food safe – supporting a healthy living environment.

Read more less

This Osmo Oil Application Set is for the simple and optimal application of all oil finishes on a smooth subsurface. Set contents 1 x Tray with ridged area 22 x 20cm 3 x Replaceable Tray Inserts 1 x Osmo Hand Pad Holder 85 x 135mm (has Hook & Loop Fastener) 2 x Osmo Oil Finish Application Fleeces 95 x 155mm

Read more less

Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods. Key Features  For the optimal treatment of wooden decking. Both the decking brush and small brush enables good material absorption and even distribution for optimal finishing results. Contents: tray with ridged area, disposable tray inserts (3 pieces), Decking Brush (150 mm) and Flat Brush (25 mm). Can be used with or without Osmo Telescopic Handle, which is sold separately. Set Contains The Osmo Floor Brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use. The Osmo Decking Brush Set contains: 1 x 150mm Osmo Floor Brush for applying Osmo Decking Oil 1 x 25mm Osmo Soft Tip Brush for the hard to reach areas and for applying Osmo End Grain Sealing Wax 1 x handy-sized roller tray 3 x clear plastic tray inserts to make clearing up easy Applications  PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish. APPLICATION Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Any surplus should be removed immediately to ensure an even finish. AFTERCARE Osmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.

Read more less

Highly effective cleaning power Osmo Decking Cleaner is a highly effective concentrate for cleaning untreated or oiled wooden decking and garden furniture. It is water soluble for quick, easy and thorough decking maintenance. Key Features  The surface becomes resistant against soiling and water. Approx. coverage : 30-100m²/L. Application SURFACE PREPARATION Remove loose debris from the surface with a firm broom/hand broom. METHOD OF APPLICATION Add Osmo Decking Cleaner to mop water (dosage depends on level of contamination, 1:25 up to max.1:1). Clean the wood along the wood grain with Osmo Decking Cleaning Brush.For a machine application, we recommend using Osmo Decking and Flooring Cleaning Machine.After cleaning, rinse with clear water. NOTE Avoid direct contact with ornamental and farm plants.To refresh/treat already greyed areas, we recommend using Osmo Wood Reviver Power-Gel. After the surface has dried, we recommend applying a pigmented Osmo Decking-Oil (e.g. Bangkirai-Oil or Larch-Oil).

Read more less

A deck cleaning brush for cleaning wooden decking boards Designed for use with Osmo Wood Reviver Gel The Osmo Decking Cleaning Brush is perfect for cleaning wooden garden decking and it is designed to be used with Osmo Wood Reviver Gel. This decking brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use.

Read more less

Osmo Decking-Oils protect and maintain timber decking, garden furniture and privacy screens made of numerous coniferous and fine woods, such as pressure impregnated Pine, Douglas Fir, Cedar, Oak or Bangkirai also suitable as a transparent colour treatment of Teak, Eucalyptus and other fine woods as well as thermally treated wood. Key Features  Approx. coverage: 24m²/L with one coat No. of coats: 2 Ideal application temperature: +10°C to 35°C Drying time: 12 hrs Sizes: 0.125L, 0.750L, 2.5L Application  For a clear and natural finish for decking, apply just two coats of 007 Teak Oil, which allows the wood to naturally grey over time. The darker the colour, the slower the greying process of the wood will start to appear. Osmo Anti-Slip Decking Oil 430 can be used as the second coat after any of the coloured Decking Oils to provide a slip resistant surface. Recommended application is 35ml/m² SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding.If possible, and if the wood is absorbent please apply the first coat to all sides before installation.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain.For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing.Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying.Once dry apply the second coat – also thinly.If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. NOTE Osmo Teak-Oil 007  is a clear decking oil finish and therefore offers only little protection against UV radiation (greying).As a clear top coat for fence panels / screens, we recommend Osmo UV-Protection-Oil/UV-Protection-Oil Extra. For decking the clear Anti-Slip Decking Oil 430 should be applied over 1 x coat of a coloured Osmo Decking Oil. Clear Anti-Slip Decking oil 430 offers higher pigment protection which increases the durability of the finish against wear and weather.For especially mechanically loaded areas (e.g. decking), we recommend checking the finish at least once a year and to eventually recoat the surface with the appropriate finish.Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces.Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. Using jet/power washers or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with diluted Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth). Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Read more less

Osmo Door Oil is ideal for veneered doors. The unique formulation penetrates the wood surface which remains microporous and whilst the finish will not crack, peel, flake or blister. The surface also becomes healthy and elastic, and the wood's fibres are prevented from becoming dry and brittle over time as well as shrinking and swelling. Application SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Door-Oil is ready to use. Do not thin. Shake well before use. For solid doors, clean old microporous stains thoroughly. Old paints,varnishes and lacquers must be completely removed. If renovating veneered doors, always check with the door manufacture that renovation is possible. Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding P120-150 for solid wood doors. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. If possible, please apply the first coat to all sides before installation. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. If applying the Door-Oil 3033 Raw, remove excess white pigment before allowing the surface to dry. Allow for good ventilation while drying. After drying, apply a second coat – also thinly. NOTE Applying the product too generously and insufficient ventilation lead to delays in drying time. Oils enhance the natural tone of wood (clear Door-Oil 3060 with permanent wetlook-effect). Osmo Door-Oil 3033 Raw counteracts exactly this effect and protects lighter coloured wood almost invisibly. The original look of the wood can be kept – no emphasising of the natural colour of the wood (no wetlook-effect). On dark/reddish wood species, Osmo Door-Oil 3033 Raw can be seen as a faintly white surface. Over application of Osmo Door-Oil 3033 Raw can also result in a faintly white surface. A trial application is recommended. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner. Occasional Maintenance: For the Intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door Oil 3060 clear satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw matt as it will appear more shiny. Recoating: Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.

Read more less

The Osmo Dust Mop head is for use with the Osmo mop clean kit. Fantastic for removing dust, lint, fluff and animal hair. Easier to use and more energy saving than using a vacuum cleaner. Applications A replacement dust mop head for use with the Osmo Floor Cleaning Kit For the effective dry cleaning of wooden floors The ease of a broom combined with the efficiency of a vacuum cleaner Effectively collects dust, lint and animal hair Can be used to dry clean laminate and vinyl flooring

Read more less

Osmo Easy Clean Hand Wipes are ideal for wiping away any excess product left on your hands after use, when there is no soap and water available. Exceptionally gentle on skin and leave hands feeling clean and fresh.A single hand wipe measures approximately 330mm x 165mm.   Applications  Damp cleansing hand wipes Effectively removes wax, oil, ink, tar, glue, bitumen and more Each pack contains approximately 15 hand wipes

Read more less

Osmo Easy Pads are soft, lint free cloths that can be used for applying Osmo Wood Oils to wooden furniture, picture frames and more. They are Ideal for applying the range of Osmo Top Oil products to kitchen worktops and other wood surfaces. Perfect for cleaning and maintaining wooden surfaces when used with the range of Osmo wood cleaners and maintenance products such as Osmo Liquid Wax Cleaner, Osmo Wash and Care and Osmo Intensive Cleaner. Pack of 10.

Read more less

Osmo End Grain sealer protects the ends of decking and other wood types. Ideal for interior and exterior use as it has excellent weather, water and dirt resistance which minimises swelling and shrinkage whilst protecting against cracks and preventing bleeding. This clear sealer has a microporous formulation which gives a breathable finish that does not peel, flake or crack. Safe for human, animal and plant once dry.   Key Features Protects edge grain of decking against cracks Prevents wood ingredients from bleeding High weather resistance Safe for human, animal and plant once dry Very water and dirt resistant Minimises wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake Suitable for interior and exterior use   Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo End Grain Sealing Wax is ready to use. Do not thin. Stir well.The finished surface is influenced by several factors, including the condition of wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, apply generously to end grains.To achieve an optimal protection for strongly absorbing end grains, we recommend applying the sealing wax two times wet-in-wet or after drying carry out a second coat. NOTE Osmo End Grain Sealing Wax is clear and therefore it can be applied universally.Please only apply to end grains. Not for area treatment. Wipe away any excess wax from other surfaces with a cloth.Oils enhance the natural tone of wood (permanent wet effect). After drying, we recommend coating the other wood surfaces with Osmo wood finishes (e.g. Bangkirai-Oil, Massaranduba-Oil, Country Colour or Natural Oil Woodstain). Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. OVERVIEW Osmo End Grain Sealing Wax protects the end grain from cracks during all elements of weathering. Minimises the water absorption, as well as the seasoning of the end grains. The surface is water and dirt resistant. Swelling and shrinking as well as ‘bleeding’ of the contents of the wood will be reduced. It is clear and is therefore universally applicable.

Read more less

Make short work with large areas Made with 100% natural bristles with soft tips which gives fine control in achieving the desired effect and exceptional coverage capacities to produce professional looking results every time. With a high quality beech frame and a robust handheld green handle (see image) in 150, 220 and 400mm widths. Simply attach the extendable Osmo Telescopic Handle (sold separately) for applying in comfort. Applications    OVERVIEW Osmo Floor Brush is ideal for the application of Osmo floor oils to all wooden flooring. We recommend using it in conjunction with the Osmo Telescopic Handle for ease of application, especially for hard to reach areas. In addition to interior floors, the Osmo Floor Brush is perfect for applying Osmo decking oils and decking stains to wooden decking boards. This brush is also available as part of the Osmo Decking Brush Set. PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish. APPLICATION Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Any surplus should be removed immediately to ensure an even finish. AFTERCARE Osmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.

Read more less

A professional, ready-to-use system for the maintenance of oiled wooden floors Suitable for softwood and hardwood flooring and perfect for floors finished with Osmo Polyx-Oil and other hard wax floor oils   Kit Contains  Wash and Care cleaning concentrate 1ltr Liquid Wax Cleaner Spray 0.4ltr Cloths 3 pcs, maintenance instructions Applications SURFACE PREPARATION It is recommended that floors should be dry swept or vacuumed prior to cleaning and maintaining to remove any loose dust, dirt and grit from the floor. APPLICATION Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the container at all times. Add Osmo Wash and Care to water (1 capful of Wash and Care per litre of water) Clean the floor with a damp (not wet) mop and wipe dry immediately If necessary, lightly sand out any stubborn stains or minor scuffs and scratches with the supplied abrasive pad Take care to ensure that any dust created from the abrasive pad is removed with a vacuum cleaner Next apply Liquid Wax Cleaner Spray evenly over the wood floor surface and massage into the wood using the specialised cleaning cloths provided When this cleaning system is applied regularly, it helps to keep floors resistant to dirt and signs of wear. For full instructions, refer to the Maintenance Instructions provided. CARE If floors cleaned with the Osmo Floor Maintenance Kit become dirty or dusty over time, simply repeat the steps laid out in the Preparation and Application sections above. Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner. Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Read more less

The Osmo Floor Roller and Tray Set is a complete kit which has been produced for the quick and easy application of floor finishes. It’s ideal for applying Osmo Wood Oils and other types of floor finishes. Suitable for all Polyx oils, clean with white spirit only. Set Includes  Tray with ridged area 3 disposable tray inserts Microfibre roller (250mm) Roller frame The roller frame can be attached to the Osmo Telescopic Handle (sold separately) for even greater ease of application.

Read more less

Pack of 10 Tray inserts for the Osmo Floor roller set.

Read more less

Clear oil-based wood stain for all wood in outdoor areas. Microporous stain allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, extremely weatherproof and UV-stable. Will not crack, peel, flake or blister. Simply recoat without sanding or primer. Easy and seamless application. Wood stain stays workable while coating. Easy and seamless application Improves and maintains the appearance of wood Suitable for both hardwoods and softwoods Exceptionally high coverage Woodstain stays workable while coating Safe for humans, animals and plants once dry (biocide free) Highly water and dirt resistant Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating SURFACE PREPARATION Wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks. Pressure-impregnated wood, Massaranduba,Bangkirai or Garapa need to weather off for at least 3 months. De-grey any already greyed wood with Osmo Wood Reviver Power-Gel before applying Osmo Garden Furniture Oil. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Garden Furniture Oil is ready to use. Do not thin. Stir well before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. Always wear a dust mask while sanding. If possible, please apply the first coat to all sides before installation. If additional protection against blue stain, rot and insect attack is desired, pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With a stiff brush (Osmo Flat Brush) or a lint free cloth, apply thinly and evenly to the clean and dry wood surface. Always work with wood grain. Apply thinly and evenly. Ventilate well while drying. Then apply the second coat – also thinly. NOTE Osmo Garden Furniture Oil is clear; therefore it offers no UV protection (greying). Due to their surface properties, ribbed or rough saw wood surfaces absorb more product. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth) . Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Read more less

Osmo intensive cleaner is an ideal alternative to sanding wooden surfaces finished with oils and waxes, e.g. flooring, furniture, as well as plastics, stainless steel and other water-repellent surfaces. Product Advantages Easy application Ideal for public spaces Basic cleaning instead of sanding Can be used in the interior and exterior Method 1. Dilute concentrate 1: 10 to 1: 20 with water. 2. Apply to soiled surfaces, loosen dirt and wipe up with clean water. For machine processing on flooring, we recommend using a single disc machine (e.g. Osmo FloorXcenter) with brush attachment, red or green pad. 3. Wipe up with Osmo Micro-Mop Plush or a lint-free cotton cloth. 4. After succesfully drying, retreat the cleaned surface with Maintenance Oil or a Polyx-oil.   Never apply undiluted. Definitely perform a trial application on the subsurface. Retreatment with Maintenance oil or Polyx-Oil depends on the condition of surface after cleaning.

Read more less

Osmo Interior Spray Cleaner (8026) 500ml can be used for any number of interior cleaning projects where a previously oiled or waxed wooden surface requires cleaning and maintaining.PreparationRemove any loose dust, dirt and grit from the surface of the wood to be cleaned with a soft, dry, lint-free or microfibre cloth before spraying.ApplicationAlways do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.Turn the spray nozzle to openSpray Osmo Spray Cleaner directly onto the wood surface, being careful not to over-saturate the surface of the woodWipe the surface with a clean, lint-free cotton or microfibre clothRepeat the process until the surface is cleanFeatures and Highlights A ready-to-use, water-based spray cleaner for oiled and waxed interior wood Ideal for wood worktops, doors, furniture & more Effectively cleans and moisturises the wood Maintains and protects the finish from wear Quick drying and easy to use Dries to a streak-free finish Low V.O.C

Read more less

Especially developed for the most demanding wooden floors treated with Osmo Polyx®-Oil for regular cleaning and occasional refreshing and maintenance. Floors with expected high tread and quick wear can be regenerated and cleaned at the same time with Maintenance Oil. Key Features  Coverage - 40-60sqm A Litre Coats 1 coat Drying Time 3-4 hours (23°C/50% R.H.). Application to Small areas with A Cloth Larger areas with A Scraper / Microfibre roller, then Buffing machine Application SURFACE PREPARATION Wood surface must be clean, dry (moisture content max. 18 %) and free of dust.Osmo Maintenance Oil is ready to use. Do not thin.Stir well before use.Clean the surface thoroughly with Osmo Intensive Cleaner and rinse (damp mopping) with clear water.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Double Blade Scraper or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad (do not rub in 3098). Remove excess product.For smaller areas, Osmo Maintenance Oil can be applied with a lint-free cloth.Allow for good ventilation while drying. NOTE The maintenance results are influenced by several factors, including the condition of wood. Therefore, a trial application is always required. If wood is raw or already greyed, the surface must be sanded and treated with Osmo Polyx®-Oil. Do not rub in Maintenance Oil 3098 Semi-Matt/Anti-Slip with a single disc machine.

Read more less

A replacement Osmo Micro Mop Head for the Osmo Floor Cleaning Kit, which is ideal for the routine application of Osmo Wash and Care. The plush, soft fibres maintain finished surfaces without the wearing of product. Ideal for both domestic and commercial use.Please note: The Osmo Micro Mop should only be used for damp cleaning only, not wet.Features and Highlights A replacement microfibre mop head for use with Osmo Floor Cleaning Kit Suitable for varnish, stone, linoleum and other water resistant surfaces Perfect for the damp cleaning of wooden floors Quick and easy to use

Read more less

The Osmo MS Advance 600ml Sausage is a cross linking, MS polymer-based wood floor adhesive formulated for the installation of interior wood block parquet, engineered wood plank, acrylic impregnated plank, bamboo and pre-finished and unfinished solid wood flooring. Osmo MS Advance Wood Flooring Adhesive in a convenient 600ml sausage High strength, waterproof bond Early quick-grab formula Ready-to-use, no mixing required Remains flexible, enabling seasonal expansion and contraction of floor boards Moisture inhibitor and sound reducing properties Modified silane polymer chemistry 100% solids Low odour Water, solvent and isocyanate-free

Read more less

OSMOUK MS Trade is a one component adhesive specially formulated for the interior installation of parquet block, engineered wood plank as well as pre-finished and unfinished solid wood flooring. Solvent and isocyanate free, with negligible VOC content and low odour. Thanks to the special formulation the adhesive has great early strength build for immediate grab and quickly builds to a tenacious but elastic bond as the adhesive continues to cure.  Specifications  Approx. coverage: up to 18m² Application climate: 15-30°C, 30-60% RH Size: 15KG Suitable for use with under floor heating 100% solids and low odour Water and solvent free Isocyanate free High strength Waterproof bond Early quick grab Meets environmental emissions according to DIBt

Read more less

The Osmo Soft Tip Brush is ideal for applying the range of Osmo wood oils.Looking for a different type of brush? See the full range of Osmo brushesThis product can also be found as part of the Osmo Premium Roller and Osmo Brush Set and the Osmo Decking Brush SetPreparationAs a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish.The necessity of sanding and removing previous finishes from the surface to be worked on will depend on the oil, wax or varnish used (see product instructions for guidance on this).ApplicationSimply dip your Osmo Soft Tip Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grainAny surplus should be removed immediately with a microfibre clothApply second coat of oil with the Osmo Oil Finish Application Fleece and remove excessAftercareOsmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.Features and Highlights A high quality soft tip brush for the application of wood oils Ideal for both professional and DIY use Flat, straight edge construction, perfect for corners and edging Ergonomic wooden handle for comfort and durability Sturdy metal bristle brace reduces bristle loss during application Bristles are made from a high quality synthetic mix for a perfect finish every time

Read more less

Osmo Natural Oil Woodstain is perfect for all exterior woods, including doors, windows & windowsills, carports, timber cladding, balcony, wooden decking, screens & smooth fences, pergolas, summer houses and garden furniture.Base and top coat in one finish. Key Features Fast Drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduce wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake  No sanding necessary for future applications  Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%).Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use.If possible, please apply the first coat to all sides before installation.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat.For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other.Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones.Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone.Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas.The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Read more less

Osmo Polyx-Oil Effect Raw is suitable for the protection and nearly invisible finish of all light-coloured interior woods, such as wooden floors and furniture. Key Features  Nearly invisible appearance, no 'permanent wet effect' Light coloured wood stays light coloured Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Application   SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Effect Raw is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. Applying Polyx®-Oil Effect Raw over very textured or coarse surfaces could appear more white. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Floor Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Applying excess Polyx®-Oil Effect Raw 3044 may lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry. Allow to dry for approx. 24 hours under good ventilation.After drying, quickly apply a second coat also thinly.When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Polyx®-Oil Effect Raw is slightly white tinted and protects lighter coloured wood species nearly invisibly. On dark, reddish or ‘smoked / fumed’ wood species, Polyx®-Oil Effect Raw is visible as slightly white chalky surface. Applying excess Polyx®-Oil Effect Raw 3044 may also lead to a white chalky surface. Remove visible white pigments before allowing the surface to dry.A trial application is recommended. Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil.Any brushstrokes can be removed with an unused dry Microfibre Roller within 30 minutes after applying. For extractive rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop. Occasional Maintenance: If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Spray cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first. Recoating: When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.

Read more less

Osmo Polyx-Oil Rapid 3232 and 3262 is ideal for protecting all wooden floors, such as solid wood and plankwood flooring, blockstrip, OSB and cork floors, as well as for furniture. Key Features  Fast drying (apply 2 coats in a single day) Enhances the wood's natural character Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Resistant to common household spillages Application is by brush or roller Coverage up to 24sq/m per litre Dry time 4 hours and recoatable after 12 hours. Recommended 2 coats Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Rapid is ready to use. Do not thin.Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Osmo Microfibre Roller or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well within 10-15 minutes. Wipe away any excess product.Allow to dry for approx. 4-5 hours under good ventilation. After drying, apply a second coat also thinly and quickly. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.

Read more less

Osmo Polyx-Oil Original 3032 and 3062 is a protective wood treatment for interior use. Combines natural oils and waxes to form a hardwearing and durable finish which is ideal for wooden flooring and furniture.  Osmo Polyx Hardwax Oil provides a warm and rich effect that brings out the true beauty of all woods by emphasising the grain and promoting its natural characteristics. Exceptional durability is achieved. Microporous and will not crack, flake or peel.              Key Features Resistant to common household spillages Application is by brush or roller  Coverage up to 24sq/m per litre Touch dry between 4-8 hours and recoatable after 12 hours. Recommended 2 coats Application  SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Original is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation.After drying, quickly apply a second coat also thinly. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly.On cork, longer drying times are to be taken into consideration (at least 24 hours).Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.

Read more less

Osmo Polyx Oil Tint is a professional-grade wood finish that enhances the natural beauty of your wood surfaces. This oil-based formula is easy to apply and provides long-lasting protection against wear and tear. It's perfect for use on a variety of wood types, including oak, pine, and mahogany, and can be used on both indoor and outdoor surfaces. One of the unique features of Osmo Polyx Oil Tint is its wide range of available colours. The oil is also water-resistant and resistant to heat and , making it ideal for use in high-traffic areas.  Protects and colours with wood grain visible. Harmonious appearance Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Key Features FINISHES - White, Light Grey, Honey, Amber, Terra, Graphite, Black (all Satin) WATER POP- spray or damp cloth timber surface, allow to dry prior to applying tints to intensify colour APPLICATION TOOLS - Osmo Flat Brush, Floor Brush, Hand Pad or Osmo Microfibre Roller RECOMMENDED USE - Interior wooden floors and furniture RECOAT - One coat, when signs of wear become visible SIZES - 5ml, 125ml, 750ml, 2.5L DRY TIME - 24 hours CLEAN UP - Osmo Brush Cleaner COVERAGE - 30m²/L with one coat COATS - 1-2 coats CARE - Osmo Wash and Care, or Spray-Mop Application Transparent colour: With Osmo Flat Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.Allow to dry for approx. 24 hours under good ventilation. If a stronger colour intensity is desired, repeat the process (however maximal two coats). Lightly stained effect: Within 20 minutes after application, wipe away product along the wood grain with a cloth or white pad. Allow to dry for approx. 24 hours under good ventilation. Intensive colour: For this application, we recommend Osmo Wood Wax Finish or Osmo Oil Stain. Important: Apply maximum one coat of Polyx®-Oil Tints or Oil Stain to flooring.(Not applicable for Polyx®-Oil Tints 3040 White, see Notes.) After thoroughly drying, a top coat with a clear Osmo Polyx®-Oil is to be carried out. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.

Read more less

The Osmo Repair Kit can be used for making good any cracks, scratches and dents in all exterior and interior wooden surfaces. The included wax sticks are made from a blend of mineral waxes, coloured with earth and oxide dyes. Key Features For repairing scratches, dents, cracks and splits in exterior and interior wooden surfaces Suitable for solid wood, veneer, foil, thermosetting, thermoplastic & plastic surfaces Wax sticks can be mixed during melting to produce unique shades for repairs Good elasticity meaning no development of cracks Quick and easy to use. Kit Contains 6 x 8gm wax filler sticks of various colours Heat pen Batteries X 2 For an alternative interior wood filler, why not try Osmo Interior Wood Filler or Osmo Interior Gap Sealer For extra wax sticks, use Osmo Wax Stick Refill Pack Application Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.Liquify the wax filler stick or sticks with the heated melting knife and drop the melted wax filler into the damaged area until the scratch, hole or imperfection in the wood is slightly overfilled.When the wax filler has dried, use the grooved handle of the melting tool to plane the repaired area, removing any excess surface waxTo restore the grain pattern of the filled area, scratch the surface of the repair area lightly with a pointed item, then re-fill with the grain shade of waxRemove any final filler residues by polishing lightly with the grey finishing pad included within the Osmo Repair KitPlease note: The clear wax filler stick can be used to fill pressure indentations in the timber.

Read more less

For oil based products - includes fresh box (airtight container for reuse)

Read more less

Osmo roller frame only.

Read more less

Spare Microfibre Roller Sleeves (small) for use with Osmo Roller & Brush Set - Suitable for all Osmo finishes on natural, sawn wood. Ideal for treating larger areas. Contains: 2 x Osmo Microfibre Roller Sleeves (10cm wide).

Read more less

Pack of 10 tray inserts for Osmo roller, tray and brush set.

Read more less

Osmo Extension Pole making any floor or ceiling project within easy reach. Features and Highlights Extendable pole for use with Osmo Floor brushes Easily adjusted from 110cm - 220cm Ergonomic, soft-touch handle Screw-fix head connects to Osmo applicators The Osmo Telescopic Handle can be used in conjunction with the following Osmo products: Osmo Floor Brush Osmo Floor Pad Holder Osmo Roller Frame Osmo Deck Cleaning Brush

Read more less

Osmo Top Oil is ideal for protecting interior furniture surfaces and work surfaces made of solid wood or edge-glued panels (e.g. kitchen worktops, desks, shelving etc.). Also suited to cork and OSB.

Read more less