Repairing wood floors
Morrells One-Part Coloured Wood Filler 250ml
A range of ready-for-use water-based wood fillers developed for filling pin holes, nail holes and other small imperfections on wood for internal use. They are formulated to be applied by either knife or scraper and are available in a variety of colours. The standard range consists of a selection of the most widely used wood colours. Formulated on a careful selection of quality raw materials, they have good adhesion and anchorage properties coupled with minimal shrinkage and absorption. They are quick drying with excellent sanding properties. For hand application the softer 47 – Hand Stopper is recommended. This one-part wood filler cannot be used for repairing damaged edges, corners and other more significant damages, however Morrells Two-Part Wood Filler can be used for such repairs. Application Apply the one part wood filler directly on to the timber using a knife or scraper Apply the one part wood filler in slight excess to allow for shrinkage during drying Deep holes should not be filled with the one part wood filler in a single operation due to the risk of excessive shrinkage and crumbling of the dried filler Leave to dry overnight for thorough hardening Sand away excess dried filler with 180-240g water-lubricated sandpaper Surface is now prepared for normal finishing Drying: Overnight Equipment cleaning: Hot water
£9.42
Osmo Polyx Oil Rapid
Osmo Polyx-Oil Rapid 3232 and 3262 is ideal for protecting all wooden floors, such as solid wood and plankwood flooring, blockstrip, OSB and cork floors, as well as for furniture. Key Features Fast drying (apply 2 coats in a single day) Enhances the wood's natural character Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Resistant to common household spillages Application is by brush or roller Coverage up to 24sq/m per litre Dry time 4 hours and recoatable after 12 hours. Recommended 2 coats Application SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Rapid is ready to use. Do not thin.Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Osmo Microfibre Roller or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well within 10-15 minutes. Wipe away any excess product.Allow to dry for approx. 4-5 hours under good ventilation. After drying, apply a second coat also thinly and quickly. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
£3.99 - £106.58
Osmo Repair Kit
The Osmo Repair Kit can be used for making good any cracks, scratches and dents in all exterior and interior wooden surfaces. The included wax sticks are made from a blend of mineral waxes, coloured with earth and oxide dyes. Key Features For repairing scratches, dents, cracks and splits in exterior and interior wooden surfaces Suitable for solid wood, veneer, foil, thermosetting, thermoplastic & plastic surfaces Wax sticks can be mixed during melting to produce unique shades for repairs Good elasticity meaning no development of cracks Quick and easy to use. Kit Contains 6 x 8gm wax filler sticks of various colours Heat pen Batteries X 2 For an alternative interior wood filler, why not try Osmo Interior Wood Filler or Osmo Interior Gap Sealer For extra wax sticks, use Osmo Wax Stick Refill Pack Application Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.Liquify the wax filler stick or sticks with the heated melting knife and drop the melted wax filler into the damaged area until the scratch, hole or imperfection in the wood is slightly overfilled.When the wax filler has dried, use the grooved handle of the melting tool to plane the repaired area, removing any excess surface waxTo restore the grain pattern of the filled area, scratch the surface of the repair area lightly with a pointed item, then re-fill with the grain shade of waxRemove any final filler residues by polishing lightly with the grey finishing pad included within the Osmo Repair KitPlease note: The clear wax filler stick can be used to fill pressure indentations in the timber.
£22.27
Osmo Wax Sticks Refill Pack for Repair Set
Osmo wax stick refill pack is a handy kit of 10 refill sticks in different wood shades. It can be used as a refill for Osmo Repair Kit, or used on their own with an alternative heat source to melt the wax.
£11.85
Bona 8100 178mm Black Silicon Carbide Sanding Discs
Bona 8100 is a velcro backed standard abrasive made of silicon carbide, also known as carborundum, a very hard mineral that creates new sharp points when worn. This ensures that it remains robust throughout its lifetime. This property - and an open coat - ensure cool running on high speed machines, such as edge sanders.
£33.42 - £47.01
Bona Sanding Screens - 407mm x1 Box (10 Pack)
Abrasive screen for surface preparation of wooden floors prior to coating and for cutting back grain raise after coating. High durability and low grit loss. Open mesh structure that impedes clogging and improves dust extraction.KEY BENEFITS Non-Clogging Open mesh structure for improved dust extraction Double-Sided
£78.90
Bona 407mm Buffing Pads (16") (Pack of 5)
Bona Super Pad 407 mm can be used for several purposes - sanding in between coats, oiling, polishing, or cleaning the floor, or as a backing for a net. The lighter the colour, the less aggressive the pad is to the buffed surface. From smooth to rough White backing for sanding screen. Can also be used for buffing polish. Tan (beige) for polishing Red for daily cleaning Green for periodic cleaning and oil maintenance Brown for oil application
£53.37
Stopgap 400 Repair 10KG
STOPGAP 400 is a fast setting, rapid drying compound for repairing internal floors prior to the application of STOPGAP smoothing underlayments in light to heavy duty applications. It is also suitable for use on stairs, steps and general repairs to cracks and holes. STOPGAP 400 is dimensionally stable and is supplied as a pre-blended dry powder designed for applications between 2-50mm. It is protein-free which allows it to be used in biologically sensitive areas. STOPGAP 400 is suitable for use over a wide range of subfloor types including sand/ cement screed, concrete, sound asphalt, granolithic, terrazzo, epoxy and polyurethane resins, ceramic and quarry tiles and STOPGAP waterproof surface membranes.
£15.96
