Free next working day delivery on all orders placed before 3pm

Osmo Natural Oil Woodstain

    Description

     

    Osmo Natural Oil Woodstain is perfect for all exterior woods, including doors, windows & windowsills, carports, timber cladding, balcony, wooden decking, screens & smooth fences, pergolas, summer houses and garden furniture.Base and top coat in one finish.

    Key Features

    • Fast Drying
    • Natural wood grain remains visible
    • Extremely weather and UV resistant
    • Very water and dirt resistant
    • Resistant against algae, mould, mildew and fungal attack
    • Reduce wood swelling and shrinkage
    • Microporous, breathable finish which does not crack, peel or flake 
    • No sanding necessary for future applications 

    Application 

    SURFACE PREPARATION

    Wood surface must be clean, dry and frost-free (moisture content max. 20%).
    Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use.
    If possible, please apply the first coat to all sides before installation.
    Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
    The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
    If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

    METHOD OF APPLICATION

    With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.
    Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat.
    For renovation works, one coat applied to the clean and dry surface is usually sufficient.

    NOTE

    Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other.
    Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones.
    Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone.
    Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas.
    The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.

    Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.

    CARE

    Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

    Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

    Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

                                Product form

                                SKU: 22-XC3I-7E66

                                Free pickup in our shop(s)

                                £86.78 Incl. VAT

                                1 in stock, and ready to ship!

                                • Shipped today? Order within: Oct 04, 2024 15:00:00 +0100

                                  Description

                                   

                                  Osmo Natural Oil Woodstain is perfect for all exterior woods, including doors, windows & windowsills, carports, timber cladding, balcony, wooden decking, screens & smooth fences, pergolas, summer houses and garden furniture.Base and top coat in one finish.

                                  Key Features

                                  • Fast Drying
                                  • Natural wood grain remains visible
                                  • Extremely weather and UV resistant
                                  • Very water and dirt resistant
                                  • Resistant against algae, mould, mildew and fungal attack
                                  • Reduce wood swelling and shrinkage
                                  • Microporous, breathable finish which does not crack, peel or flake 
                                  • No sanding necessary for future applications 

                                  Application 

                                  SURFACE PREPARATION

                                  Wood surface must be clean, dry and frost-free (moisture content max. 20%).
                                  Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use.
                                  If possible, please apply the first coat to all sides before installation.
                                  Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
                                  The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
                                  If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

                                  METHOD OF APPLICATION

                                  With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.
                                  Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat.
                                  For renovation works, one coat applied to the clean and dry surface is usually sufficient.

                                  NOTE

                                  Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other.
                                  Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones.
                                  Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone.
                                  Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas.
                                  The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.

                                  Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.

                                  CARE

                                  Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

                                  Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

                                  Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

                                                                Recently viewed products

                                                                © 2024 Wiltshire Wood Flooring Supplies,

                                                                  • American Express
                                                                  • Apple Pay
                                                                  • Diners Club
                                                                  • Discover
                                                                  • Google Pay
                                                                  • Maestro
                                                                  • Mastercard
                                                                  • PayPal
                                                                  • Shop Pay
                                                                  • Union Pay
                                                                  • Visa

                                                                  Login

                                                                  Forgot your password?

                                                                  Don't have an account yet?
                                                                  Create account