OSMOUK MS Trade is a one component adhesive specially formulated for the interior installation of parquet block, engineered wood plank as well as pre-finished and unfinished solid wood flooring. Solvent and isocyanate free, with negligible VOC content and low odour. Thanks to the special formulation the adhesive has great early strength build for immediate grab and quickly builds to a tenacious but elastic bond as the adhesive continues to cure. Specifications Approx. coverage: up to 18m² Application climate: 15-30°C, 30-60% RH Size: 15KG Suitable for use with under floor heating 100% solids and low odour Water and solvent free Isocyanate free High strength Waterproof bond Early quick grab Meets environmental emissions according to DIBt
Essential for levelling any plaster or render surface and helps identify hollows and high spots before sponging and trowelling up. Straight edge & screed rule Heavy duty aluminium box section Essential for levelling any plaster or render surface Helps identify hollows and high spots before sponging and trowelling up Specifications 3'4x3" (1000x80x40mm) 5'0x3" (1500x80x40mm) 6'8x3" (2000x80x40mm) 8'2x3" (2500x80x40mm) 10'0x3" (3000x80x40mm) Application For levelling & ruling off Plaster & render Floors & walls
£36.03 - £77.05
Noise Reducing Wood flooring & Laminate Underlay Duralay Timbermate Excel is part of the Timbermate Range of underlays along with Silentfloor Gold perfectly designed for engineered wood flooring and laminate flooring. Timbermate Excel reduces in-room noise by up to 30% and contains our Vapourstop barrier to help prevent moisture. Independently tested to produce a sound reduction rating of 56 SONE 3.60mm gauge high density resilient rubber underlay Vapourstop barrier that helps prevent moisture Prevents the overstraining of wood and laminate boards Suitable for use on most subfloor types including screed and suspended timber floors Provides an excellent sub-floor masking minor surface imperfections Simple, quick and easy to install Available in 10sqm and 15sqm rolls It’s recommended for the joints to be taped together, we recommend our vapour tape.
£63.50 - £80.53
Solid oak flooring reducer profiles available with 7mm, 15mm and 20mm rebates. Designed to create a smooth transition between wooden floors and floors of a different height. Most commonly used to link wood to wood, wood to tile, wood to vinyl and wood to carpet. Solid oak moulding Reducer to bridge variations in height between two floors Suitable for solid and engineered wood floors Unfinished allows for good colour match to the flooring finish Lacquered finish saves time, looks great and is ready to fit Quick and easy installation *As all of our thresholds are natural real solid oak products, this means the grain and colour may vary.
£20.09 - £51.28
Osmo Polyx-Oil Rapid 3232 and 3262 is ideal for protecting all wooden floors, such as solid wood and plankwood flooring, blockstrip, OSB and cork floors, as well as for furniture. Key Features Fast drying (apply 2 coats in a single day) Enhances the wood's natural character Extremely durable and hardwearing Very water and dirt resistant Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children's toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications Resistant to common household spillages Application is by brush or roller Coverage up to 24sq/m per litre Dry time 4 hours and recoatable after 12 hours. Recommended 2 coats Application SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%).Osmo Polyx®-Oil Rapid is ready to use. Do not thin.Stir well using a flat stirring stick or spatula before use.Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P180-240. Before oiling the surface, remove sanding dust with a broom or vacuum.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION With Osmo Flat Brush, Osmo Microfibre Roller or Floor Brush, apply thinly and evenly to the clean and dry wood along the wood grain and spread well within 10-15 minutes. Wipe away any excess product.Allow to dry for approx. 4-5 hours under good ventilation. After drying, apply a second coat also thinly and quickly. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured. When renovating or recoating an already oiled surface, one coat applied to the clean and dry surface is usually sufficient. NOTE Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying.For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). If a higher gloss level is desired use Osmo Liquid Wax Cleaner very thinly and polish when dry. Avoid using Osmo Liquid Wax Cleaner on surfaces that have not dried and cured properly. Always trial apply first. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Spray Cleaner and Osmo Easy Pads. Occasional Maintenance: For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils. Recoating: Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
£35.08 - £106.58
Lecol 7500 Filler has been specially developed for the easy filling of joints or damaged spots in parquet or other wooden floors. The filler is mixed with fine abrasion dust from the wood in order to obtain a paste that can be used to fill small voids. Key Features: Very fast drying time Allows sanding after a short period of time Specifically developed for wooden floors Easy to use Low odour Safe to use Very good filling properties Very strong adhesion Water free
£23.09 - £79.67
Bona R848 is an elastic, 1-component silane wood floor adhesive. A high performance formulation that is ideal for the installation of engineered wood flooring including engineered parquet flooring. Can also be used for solid boards up to 190mm wide.KEY BENEFITS Easy to apply Fast initial bonding strength Allows load after 24 hours Up to two years' shelf life Great rib stability Compatible with underfloor heating Coverage dependant on trowel used 850 - 1250G Tensions to the sub floor are reduced. The adhesive hardens by a chemical reaction with moisture. Suitable subfloors; timber and screed Cementitious screed (CT) according to EN 13813 Floors levelled with levelling compounds (at least 2 mm thick, resistant against plasticizer migration) Calcium sulfate screed (CA) according to EN 13813 Chipboard V100 Other dry and sound sub floors Floor Preparation Subfloor preparation should be in accordance with British Standard.
Bona Traffic HD 5L (with hardener). A lacquer offering ultimate durability and an extremely fast hardness development time - meaning the floor can go back into full use after just 12 hours.An ideal choice for shops and public locations where minimal downtime is important and the highest possible durability is required. Its low emissions and low odour make it possible to use without vacating the adjacent areas and ensures there is no lingering smell. Non yellowing formulation.KEY BENEFITS Allows full traffic after 12 hours, extremely fast hardness development time Ultimate durability EC1RPLUS approved. The industry's best possible assurance against indoor air pollution for a high level of health protection and environmental compatibility Suitable for recoating pre-finished surfaces Very low odour Non-yellowing Friction approved to both EN 14904:2006 and DIN 18032:2
£147.75 - £170.16
Simple time saving idea - cut the pins to your desired height (Pins are calibrated, 5mm - 100mm), Pour screed/compound to level, pins are then held in place with their own strong adhesive tape on the bottom. Using these levelling pegs is a very time & cost effective way of building new subfloors or levelling old uneven floors. High adhesive strength. Engineered to stay straight up and locked in place during a pour. Easy to read 10-100 millimetre scale. No holes to drill. Bright yellow colour making them easily visible.
Heavy gauge aluminium skid leveller with replaceable skids for epoxy coatings, latex, screeds and self levellers. Skid leveller Heavy gauge aluminium frame Replaceable skids Rust free Produced by Refina in the UK 28mm Ø handle required Specifications Width 24" (600mm) Handle Fitting Diameter 28mm Material Depth Adjustable 10mm-30mm SPECIFIC REFERENCES Ean13 5060473535527 Applications For epoxy coatings & latex Pumped screeds & self levellers Suitable for working on rough, uneven floors
This Fein E-Cut Carbide Pro Display contains 1 x Fein E-Cut Carbide Pro Saw Blades. The Fein E-Cut Carbide Pro Saw Blade is made from TiN-coated carbide making it extremely resistant to wear. Lasts 100% longer than uncoated carbide saw blades and 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. Cuts a wide range of materials: bricks, masonry, fibre cement boards, laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. It also provides good cutting results in all timber materials, such as hardwood or chipboard. Narrow, with waist for optimum cutting speed and good swarf removal. Specification: Width: 32mmLength: 45mm