Morrells Induro XL1 Wood Floor Lacquer 5L

Morrells Induro XL1 is a high-performance single-pack polyurethane waterborne floor lacquer designed to provide a durable, clear and non-yellowing finish for wooden floors in both domestic and commercial environments.

This fully crosslinked floor lacquer is ready to use straight from the container, meaning there are no pot-life limitations typically associated with two-component systems. The self-levelling formulation provides excellent flow and clarity, helping to enhance the natural appearance of timber flooring while delivering strong protection against abrasion, scuffs and everyday spillages.

Induro XL1 is suitable for use on both solid and engineered wood flooring and provides a strong yet flexible coating with excellent chemical and mechanical resistance. It is ideal for areas with light to medium traffic and can also be used in higher traffic environments when additional coats are applied.

For best results, Induro XL1 should be used after applying Morrells GP Wood Floor Sealer to enhance the natural warmth and grain of the timber. On oily or tropical hardwoods, Morrells Isosil shellac-based sealer is recommended to isolate natural oils and contaminants before applying the lacquer system.

Key Benefits

• Waterborne single-pack polyurethane floor lacquer
• Fully crosslinked formula with no pot-life limitations
• Excellent clarity with non-yellowing properties
• Self-levelling formulation for smooth, professional finishes
• Strong resistance to abrasion, scuffs and household spillages
• Suitable for solid and engineered wood flooring
• Ideal for domestic and light to medium commercial environments

Technical Information

Pack size: 5 litres
Coverage: Approx. 40m² per 5 litres depending on timber porosity and application method
Touch dry: 20–30 minutes at 18°C
Recoatable: 2–3 hours minimum at 18°C
Recommended coats: 2 coats (domestic) / 3 coats (commercial)
Light use: after approximately 24 hours
Fully cured: 5–7 days
Traffic rating: Suitable for light to medium traffic once fully cured

Recommended System

For optimal results the following system is recommended:

• 1 coat Morrells GP Wood Floor Sealer (or Isosil for oily/tropical woods)
• 2 coats Morrells Induro XL1 for domestic environments
• 3 coats Morrells Induro XL1 for commercial or higher traffic areas

Induro XL1 can also be applied directly to properly prepared timber where a primer is not required.

Application Guidance

Ensure the floor has been properly sanded and is clean, dry and free from sanding dust before application.

Apply the lacquer using a suitable floor roller, mohair pad or T-bar applicator, working evenly along the grain of the wood. Avoid pooling and ensure consistent coverage across the floor surface.

Lightly denib between coats using a fine abrasive (150–180 grit mesh) before vacuuming and applying the next coat.

For environments requiring increased durability, Morrells Induro XL2 Flooring Lacquer provides a higher wear resistance for heavy commercial traffic.

For further technical guidance and common application questions, please refer to the Frequently Asked Questions section below.