Blenheim Originals Oak Flooring - 190mm – Brushed Natural Oak
Live flooring prices
Sign in to view pack and square metre pricing
Create a free customer account or sign in to see live prices, choose your pack or sample and use the flooring calculator.
Trade customer? Sign in to view your trade pricing. Apply for a trade account
Flooring delivery Usually 3–5 working days, subject to stock FREE
Flooring Click & Collect Usually ready in 3–5 working days FREE
Blenheim Originals Oak Flooring - 190mm – Brushed Natural Oak is part of our carefully selected real-wood flooring range, chosen for its construction, finish and natural character.
A substantial 20mm multi-ply floor with a 6mm French oak wear layer, giving the 190mm planks a reassuringly solid feel and generous long-term refinishing allowance.
The range spans unfinished, natural, brushed, smoked, cognac and raw-look surfaces, with characterful grain and knots forming an important part of the floor.
Product specification
| Product code | M1009 |
|---|---|
| Selected floor | Brushed Natural Oak |
| Format | Plank |
| Construction | Solid |
| Timber | Oak |
| Grade | Rustic |
| Pack coverage | 1.805m² per full pack |
| Price basis | Sold by the full pack, including VAT; equivalent price per square metre shown |
Natural timber and grading
Grading describes appearance rather than quality. Natural timber varies from board to board, so differences in tone, grain, knots, filler, sapwood and surface texture should be expected.
Wiltshire Wood Flooring Supplies advice
We recommend ordering a representative free sample before purchasing full packs. The subfloor, room conditions and any underfloor-heating system should be checked as part of the specification.
-
ConstructionSolid
-
Flooring formatPlank
-
Timber speciesOak
-
GradeRustic
-
Finish typeOiled
-
Colour tonePale
-
Colour familyNatural
-
Surface characterBrushed
-
Thickness20 mm
-
Board width190 mm
-
Wear layer6 mm
-
Length typeFixed Length
-
Pack coverage (m²)
These product-specific instructions summarise the current BrooksFloor engineered, multi-ply, UFH and herringbone fitting guides requirements. Fitting should be completed by an experienced wood-floor installer.
Before delivery and acclimatisation
- Use a trained wood-floor fitter and complete all wet trades before delivery.
- Maintain approximately 18–20°C and 50–65% relative humidity; for planks wider than 175 mm do not exceed 60% RH.
- Keep sealed packs flat and supported in the fitting room; only open each pack immediately before use.
Subfloor preparation and moisture
- The subfloor must be sound, clean, dry and free of paint, plaster, oil, dust and movement.
- Check flatness with a 2 m straightedge. Variation must not exceed 3 mm; level high or low areas before fitting.
- Measure and record subfloor moisture with the correct calibrated meter. Apply a compatible surface damp-proof membrane where readings or construction require it.
- Secure loose timber subfloors, countersink fixings and overlay uneven boards with suitable flooring-grade plywood without aligning joints.
- Brooks specifies approximately 12–14% moisture for timber subfloors and 3.5% moisture content, or 35–40% RH by slab test, for cementitious subfloors.
For more detail, read our engineered-floor subfloor preparation guide.
For boarded or suspended bases, read our timber subfloor preparation guide.
Fitting this floor
- Solid flooring must not be floated. Fully bond with a compatible flexible adhesive or secret-fix to a suitable timber subfloor where the board profile permits.
- Lay from at least three packs, inspect every board in good light and reject visible defects before fixing.
- Stagger end joints and avoid a repeating brick-bond pattern; do not pin expansion covers to the floor.
Use a system appropriate to the site and read our wood-floor adhesive guide.
Expansion, inspection and completion
- Provide at least a 15 mm perimeter gap (or the larger manufacturer-calculated allowance) at walls, door frames, pipes, hearths and fixed obstructions.
- Use movement breaks between rooms and wherever the manufacturer’s maximum uninterrupted span would be exceeded.
- Allow for cutting waste, grading and natural variation; mix boards across packs before fixing.
- Stop and contact Wiltshire Wood Flooring Supplies before fitting if the product, subfloor, site readings or proposed method do not match these requirements.
Not suitable for underfloor heating
This is a solid timber floor. It must not be installed over an underfloor-heating system.
- Do not rely on adhesive, underlay or thermostat controls to make this solid product suitable.
- Choose an engineered alternative with confirmed underfloor-heating compatibility.
- Contact Wiltshire Wood Flooring Supplies before ordering if the heating system or floor construction is uncertain.