New decking

The Osmo Soft Tip Brush is ideal for applying the range of Osmo wood oils.Looking for a different type of brush? See the full range of Osmo brushesThis product can also be found as part of the Osmo Premium Roller and Osmo Brush Set and the Osmo Decking Brush SetPreparationAs a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish.The necessity of sanding and removing previous finishes from the surface to be worked on will depend on the oil, wax or varnish used (see product instructions for guidance on this).ApplicationSimply dip your Osmo Soft Tip Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grainAny surplus should be removed immediately with a microfibre clothApply second coat of oil with the Osmo Oil Finish Application Fleece and remove excessAftercareOsmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.Features and Highlights A high quality soft tip brush for the application of wood oils Ideal for both professional and DIY use Flat, straight edge construction, perfect for corners and edging Ergonomic wooden handle for comfort and durability Sturdy metal bristle brace reduces bristle loss during application Bristles are made from a high quality synthetic mix for a perfect finish every time

Read more less

Please Note: Colours were developed to appear in harmony with their respective wood species e.g. 426 Larch for Larch wood projects. The wood’s natural colour and character will influence the final result. Plus, the darker the colour, the stronger the UV-resistance. Please always trial apply! All exterior woods grey into a patina colour over time, however UV-Protection Oil Tints have been developed to maintain the wood's natural colour with the use of pigments to optimally match the wood's natural characteristics. Ideal for windows, doors, cladding, fencing and other vertically structured joinery (not recommended for flat surfaces such as decking). Natural oil-based and microporous finish does not crack, flake, peel or blister. Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage. Osmo 425 Oak UV Protection Oil gives optimal protection from the sun, similar to Osmo 420 but it improves the UV resistance further by also having a small amount of Oak pigment. The oak pigment will darken the wood slightly and accentuate the wood grain but we recommend ALWAYS do a test before application, sample sachet available. For exterior use only. Especially recommended for vertical surfaces such as timber cladding, windows and doors Prolongs the renovation time significantly when used as a top coat for staining wood Contains active ingredients for the preventative protection against algae and fungal decay. Key features Coverage (m2) per Litre: 18 Base: Solvent Paint Application: Brush, Roller Suitable Substrate: Exterior Woodwork, Window Frames, Doors Exterior: Exterior Drying Time: 12 Hours PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). UV-Protection-Oil Tints is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Ideally, surfaces are sanded no finer than a P120 grit grade of sand paper. Sanding to finer grades will reduce required absorbency.If possible, and if the wood is absorbent, please apply first coat to all sides before installation. Fresh wood containing natural wood ingredients /extractives (eg:  Cedar, Teak, Mahogany or Iroko) are often less absorbent and need to weather off first before applying the product. Please refer to website ‘Suitability’ section for more details. Weathering helps ingredient rich wood become more absorbent and the wood finish adheres optimally. For renovation works, clean old microporous stains thoroughly – if necessary sand lightly. Clean and restore already greyed or weathered wood at the same time with Osmo Wood Reviver Power-Gel. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. To maintain absorbency, avoid sanding surfaces finer than a P120 grit. Weather ingredient rich wood after sanding.The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Soft wood species like Pine or Spruce are more prone to blue stain, rot and insects. If desired, pre-treat these soft woods if possible on all sides with Osmo WR Base Coat. APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well.Allow to dry for approx. 12 hours under good ventilation.Then apply the second coat.Alternatively the second coat can also be carried out with UV-Protection-Oil Extra Clear.When recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.

Read more less

Recommended for applying Osmo Wood Oils and Wood Wax Finishes, as well as for use with decking or balcony woods. Key Features  For the optimal treatment of wooden decking. Both the decking brush and small brush enables good material absorption and even distribution for optimal finishing results. Contents: tray with ridged area, disposable tray inserts (3 pieces), Decking Brush (150 mm) and Flat Brush (25 mm). Can be used with or without Osmo Telescopic Handle, which is sold separately. Set Contains The Osmo Floor Brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use. The Osmo Decking Brush Set contains: 1 x 150mm Osmo Floor Brush for applying Osmo Decking Oil 1 x 25mm Osmo Soft Tip Brush for the hard to reach areas and for applying Osmo End Grain Sealing Wax 1 x handy-sized roller tray 3 x clear plastic tray inserts to make clearing up easy Application  PREPARATION As a general rule, we recommend that surfaces should be clean and dry, and that all traces of dust and dirt be removed with a broom or vacuum cleaner before applying a wood finish. APPLICATION Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Any surplus should be removed immediately to ensure an even finish. AFTERCARE Osmo Brush Cleaner and Thinner has been designed specifically for cleaning brushes which have been used to apply Osmo wood oils.

Read more less

Bona Decking Oil provides outdoor decking with long-lasting protection against all forms of weather, from snow to sunlight. Its unique formula enhances the natural wood grain, while reducing the risk for cracking and warping. It also contains UV protection against bleaching. With easy application and quick drying, it is the perfect partner for outdoor decking protection. Key Benefits Base: Modified vegetable oils Category: Hardening oil, 1-comp Drying time (until use): 24 h Application tools: Wide brush or mohair roller Coverage: Approx. 20m ½/litre

Read more less