{"product_id":"osmo-uv-protection-oil-tints-coloured-exterior-wood-oil","title":"Osmo UV-Protection Oil Tints – Coloured Exterior Wood Oil","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n  \u003cdiv class=\"wwfs-product-intro\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eOsmo UV-Protection Oil Tints\u003c\/strong\u003e is a transparent coloured\n      exterior wood oil developed to protect vertical timber while enhancing\n      its natural colour and keeping the wood grain clearly visible.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      Designed for exterior doors, windows, cladding, fences, pergolas,\n      summerhouses and other vertical timber surfaces, its natural oil-based\n      formulation penetrates into the wood while creating a highly\n      water-repellent, weather-resistant and breathable finish.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      The transparent pigments help slow the natural greying caused by sunlight\n      more effectively than a completely clear finish. The coating remains\n      microporous, helps reduce swelling and shrinkage and will not crack,\n      peel, flake or blister.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eWiltshire Wood Recommendation:\u003c\/strong\u003e\u003cbr\u003e\n      Choose UV-Protection Oil Tints when you want to retain a natural timber\n      appearance but need stronger UV resistance than a completely clear\n      exterior oil can normally provide.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      Apply two exceptionally thin coats of the selected colour for the\n      strongest colour and UV protection. Alternatively, where a lighter colour\n      build is preferred, apply one coloured coat followed by one thin coat of\n      compatible clear\n      \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-uv-protection-oil-extra\"\u003e\n        Osmo UV-Protection Oil Extra\n      \u003c\/a\u003e.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eTransparent Colour with Exterior UV Protection\u003c\/h2\u003e\n\n  \u003cp\u003e\n    All untreated exterior timber gradually greys as sunlight and weather\n    affect the surface. UV-Protection Oil Tints use transparent pigments to\n    absorb and reduce some of this UV exposure while allowing the wood grain,\n    knots and natural character to remain visible.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The colours have been developed to complement particular timber species,\n    such as Oak or Red Cedar. They are not opaque paints and will not completely\n    hide the original wood colour, grain or variation.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eDarker Colours Generally Provide Stronger UV Resistance:\u003c\/strong\u003e\n      Transparent pigment contributes to UV protection. Deeper shades normally\n      provide greater resistance to visible greying than very pale or nearly\n      invisible finishes. However, all exterior coatings require regular\n      inspection and maintenance.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eWhy Choose Osmo UV-Protection Oil Tints?\u003c\/h2\u003e\n\n  \u003cul class=\"wwfs-benefit-list\"\u003e\n    \u003cli\u003eTransparent coloured protection for vertical exterior timber\u003c\/li\u003e\n    \u003cli\u003eHelps slow UV-related greying and weathering\u003c\/li\u003e\n    \u003cli\u003eUV-protection factor up to 12 with the complete two-coat system\u003c\/li\u003e\n    \u003cli\u003eAllows the natural wood grain and character to remain visible\u003c\/li\u003e\n    \u003cli\u003eContains active protection against mould, algae and fungal attack\u003c\/li\u003e\n    \u003cli\u003eHighly water-repellent and dirt-resistant\u003c\/li\u003e\n    \u003cli\u003eMicroporous and breathable finish\u003c\/li\u003e\n    \u003cli\u003eHelps reduce swelling and shrinkage\u003c\/li\u003e\n    \u003cli\u003eWill not crack, peel, flake or blister\u003c\/li\u003e\n    \u003cli\u003eSuitable for doors, windows, cladding and fencing\u003c\/li\u003e\n    \u003cli\u003eSuitable for pergolas, summerhouses and vertical garden structures\u003c\/li\u003e\n    \u003cli\u003eCan be used as a complete coloured two-coat system\u003c\/li\u003e\n    \u003cli\u003eCan be completed with clear UV-Protection Oil Extra where appropriate\u003c\/li\u003e\n    \u003cli\u003eEasy to maintain without completely sanding the timber\u003c\/li\u003e\n    \u003cli\u003eNormally requires only one thin renovation coat\u003c\/li\u003e\n    \u003cli\u003eAvailable in sample sachets for testing on the actual timber\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eUV-Protection Oil Tints and UV-Protection Oil Extra\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eMain Difference\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003eUV-Protection Oil Tints\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Vertical exterior timber where transparent colour and stronger UV\n            resistance are required.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Contains colour pigments that complement the timber and help slow\n            visible greying.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-uv-protection-oil-extra\"\u003e\n              UV-Protection Oil Extra\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Vertical exterior timber where a clear matt or satin appearance is\n            preferred.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Clear protection without adding a visible timber-coloured pigment.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-uv-protection-oil\"\u003e\n              UV-Protection Oil 410\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Vertical timber where a clear finish without the active protection\n            used in Extra is specifically preferred.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Standard clear UV system without the added mould, algae and fungal\n            protection contained in the Extra range.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eCurrent Osmo System:\u003c\/strong\u003e The coloured finishes in this range\n      form part of the UV-Protection Oil Extra family and contain active film\n      protection. They are for exterior use only.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eChoose Your Colour\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eColour\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eTypical Appearance\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003e425 Oak\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            A warm transparent oak tone that deepens the grain and adds a\n            natural golden-brown appearance.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Oak doors, oak windows, cladding and suitable pale timber where an\n            enriched natural oak appearance is wanted.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003e428 Red Cedar\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            A warm reddish-brown transparent shade designed to complement cedar\n            and naturally red-toned timber.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Cedar cladding, cedar doors, garden buildings and timber where a\n            richer red-brown colour is preferred.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003e429 Natural\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            A lightly white-pigmented finish that helps pale wood retain a more\n            natural, untreated appearance.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Pale exterior timber where the usual warming and darkening caused\n            by clear oil needs to be reduced.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003e432 Light Oak\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            A lighter and softer oak tone than 425 Oak, keeping the overall\n            appearance warmer without making the timber too dark.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Light oak, pale cladding and joinery where a subtle transparent oak\n            colour is wanted.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eColour Names Are a Guide:\u003c\/strong\u003e Oak does not have to be coated\n      with 425 Oak, and Red Cedar does not have to be used only on cedar. The\n      existing timber colour, grain, weathering and absorbency will all affect\n      the final appearance. Always use a sample sachet and complete a\n      representative trial.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003e425 Oak vs 432 Light Oak\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003e425 Oak\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003e432 Light Oak\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eColour depth\u003c\/td\u003e\n          \u003ctd\u003eDeeper and richer.\u003c\/td\u003e\n          \u003ctd\u003eLighter and more subtle.\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eTypical appearance\u003c\/td\u003e\n          \u003ctd\u003eWarm golden to medium oak.\u003c\/td\u003e\n          \u003ctd\u003ePale natural oak.\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eGrain emphasis\u003c\/td\u003e\n          \u003ctd\u003eMore strongly enriches and defines the grain.\u003c\/td\u003e\n          \u003ctd\u003eProduces a softer, lower-contrast appearance.\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eUV protection\u003c\/td\u003e\n          \u003ctd\u003e\n            The stronger pigment normally provides greater visible UV\n            resistance.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Provides colour protection but may weather sooner than a deeper\n            shade.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eSpecial Guidance for 429 Natural\u003c\/h2\u003e\n\n  \u003cp\u003e\n    Most clear exterior oils create a permanent wet-look effect that enriches\n    and darkens timber. UV-Protection Oil 429 Natural contains balanced white\n    pigment to reduce this colour change and help pale wood remain closer to\n    its untreated appearance.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eApply 429 Natural Especially Thinly:\u003c\/strong\u003e On dark, reddish or\n      heavily textured timber, the white pigment may appear cloudy or chalky.\n      Over-application can also leave visible white deposits. Always test first\n      and redistribute all visible pigment before allowing the finish to dry.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eWhich Osmo Exterior Product Is Right for Me?\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eOsmo Product\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eKey Difference\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003eUV-Protection Oil Tints\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Vertical doors, windows, cladding, fencing, pergolas and\n            summerhouses.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Transparent timber-coloured protection with active film protection.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-uv-protection-oil-extra\"\u003e\n              UV-Protection Oil Extra\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Vertical exterior timber where a clear matt or satin finish is\n            preferred.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Clear finish with mould, algae and fungal protection in the coating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-oil-0-75l\"\u003e\n              Osmo Decking Oil\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Horizontal decking, steps and exterior timber walking surfaces.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Designed for the greater weather and wear demands placed on\n            horizontal timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-garden-furniture-oil-clear-satin-028-1-litre\"\u003e\n              Osmo Garden Furniture Oil\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Hardwood tables, chairs, benches and suitable garden furniture.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Specialist clear oil intended particularly for outdoor furniture.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wr-base-coat-clear-4001\"\u003e\n              Osmo WR Base Coat\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Suitable untreated softwood and exterior timber requiring\n            additional preservative protection.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Penetrating base coat used beneath the decorative finishing oil.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eSuitable Surfaces\u003c\/h2\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eExterior wooden doors\u003c\/li\u003e\n    \u003cli\u003eWindow frames\u003c\/li\u003e\n    \u003cli\u003eWindow shutters\u003c\/li\u003e\n    \u003cli\u003eTimber cladding\u003c\/li\u003e\n    \u003cli\u003eWeatherboarding\u003c\/li\u003e\n    \u003cli\u003eFencing\u003c\/li\u003e\n    \u003cli\u003ePrivacy screens\u003c\/li\u003e\n    \u003cli\u003ePergolas\u003c\/li\u003e\n    \u003cli\u003eCarports\u003c\/li\u003e\n    \u003cli\u003eBalcony balustrades\u003c\/li\u003e\n    \u003cli\u003eGarden buildings\u003c\/li\u003e\n    \u003cli\u003eSummerhouses\u003c\/li\u003e\n    \u003cli\u003eVertical timber panels\u003c\/li\u003e\n    \u003cli\u003eExterior gates\u003c\/li\u003e\n    \u003cli\u003ePreviously Osmo-treated vertical timber after suitable preparation\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eVertical Exterior Timber Only:\u003c\/strong\u003e UV-Protection Oil Tints\n      is not intended as the primary coating for horizontal decking, exterior\n      steps or frequently walked-on surfaces. Use\n      \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-oil-0-75l\"\u003e\n        Osmo Decking Oil\n      \u003c\/a\u003e\n      for these applications.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eSuitable Timber Species\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eTimber\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eSuitability\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003ePreparation Guidance\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eOak, ash, beech, alder and birch\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Ensure the timber is clean, absorbent and below approximately 20%\n            moisture.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003ePine and spruce\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Consider\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wr-base-coat-clear-4001\"\u003e\n              Osmo WR Base Coat\n            \u003c\/a\u003e\n            for additional protection against blue stain, rot and insects.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eDouglas fir and larch\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable after weathering\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Allow resinous timber to weather so it becomes sufficiently\n            absorbent before coating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eCedar\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable after weathering\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Allow natural oils and extractives to reduce before application.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eTeak, iroko, mahogany and other oily hardwoods\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Ingredient-rich timber may require approximately six weeks’\n            weathering or suitable degreasing before coating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003ePressure-treated timber\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable after sufficient drying\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Allow excess moisture and treatment salts to disperse before\n            application.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eThermally modified timber\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eSuitable subject to testing\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Treat before substantial greying occurs and confirm even\n            absorption.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eGreen oak\u003c\/td\u003e\n          \u003ctd\u003e\u003cstrong\u003eNot suitable while wet\u003c\/strong\u003e\u003c\/td\u003e\n          \u003ctd\u003e\n            Do not coat until timber moisture is below approximately 20%.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cp class=\"wwfs-small-print\"\u003e\n    Natural oils, resin, treatment chemicals, moisture and previous weathering\n    can all affect the final colour and drying. Always complete a representative\n    test area.\n  \u003c\/p\u003e\n\n  \u003ch2\u003eTwo Coloured Coats or a Clear Final Coat?\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eCoating System\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eAppearance\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eProtection\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003eTwo coats of the selected tint\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Strongest and most consistent colour build.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Provides the strongest stated UV performance from the selected\n            colour system.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003eOne tinted coat plus clear Extra\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Lighter colour intensity with more natural variation visible.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Provides a clear protective final coat, but the maintenance interval\n            may be shorter than with two pigmented coats.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003cstrong\u003eOne tinted coat only\u003c\/strong\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Lightest colour effect.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Not the complete recommended system for new bare exterior timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eTwo Coats Are Required for Maximum Protection:\u003c\/strong\u003e A single\n      coloured coat or a coloured coat followed by clear oil may produce a\n      lighter result, but it does not offer the same coloured pigment build or\n      expected maintenance interval as two coats of UV-Protection Oil Tints.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eCleaning and Reviving Existing Timber\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eTimber Condition\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGeneral dirt and surface contamination\u003c\/td\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaner-1l\"\u003e\n              Osmo Decking Cleaner\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Cleaning suitable exterior timber before maintenance or recoating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eGreyed and weathered timber\u003c\/td\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wood-reviver-power-gel-6609\"\u003e\n              Osmo Wood Reviver Power-Gel\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Removing the grey weathered patina and revealing more of the\n            natural timber colour.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eGreyed timber requiring mechanical scrubbing\u003c\/td\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaning-scrub-brush-150mm\"\u003e\n              Osmo Decking Cleaning Scrub Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Working cleaner or Reviver Gel into the grain and surface texture.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eSound but lightly worn coloured finish\u003c\/td\u003e\n          \u003ctd\u003eMatching UV-Protection Oil Tint\u003c\/td\u003e\n          \u003ctd\u003e\n            Normally one thin maintenance coat once the timber is clean and\n            dry.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eRemove Grey Weathering Before Recoating:\u003c\/strong\u003e Applying tinted\n      oil directly over greyed timber may produce a dull, dirty or uneven\n      colour. Use Wood Reviver Power-Gel where the natural greying process has\n      already begun.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eRecommended Application Tools\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eApplication Tool\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eBest For\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eHow It Is Used\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-natural-bristle-brush\"\u003e\n              Osmo Flat Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Doors, windows, cladding boards, fencing and detailed exterior\n            joinery.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Apply thinly with the grain and spread the tinted oil into a\n            consistent transparent film.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-roller-set\"\u003e\n              Osmo Microfibre Roller\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Larger smooth doors, gates and flat cladding sections.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Load the roller lightly, distribute the coating evenly and lay off\n            with a brush where required.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/collections\/brushes\"\u003e\n              Wood Coating Brushes\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Frames, edges, rebates, mouldings and difficult exterior sections.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Select a suitable brush width and check corners for heavy colour\n            build or runs.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/collections\/extension-poles-handles\"\u003e\n              Extension Poles and Handles\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Higher cladding and large vertical panels.\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Use with compatible rollers or applicators while maintaining\n            control over coating thickness and overlap.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\n      Work individual boards, doors or panels from end to end wherever\n      possible. Maintain a wet edge and avoid stopping halfway through a\n      prominent section, as dried overlaps may appear darker.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      Stir regularly throughout application. Transparent pigment can settle,\n      and poor mixing may cause visible colour variation between sections.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eRecommended Accessories\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eAccessory\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-natural-bristle-brush\"\u003e\n              Osmo Flat Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Controlled application to doors, windows and cladding.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-roller-set\"\u003e\n              Osmo Roller Set\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Efficient application across larger smooth vertical timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wood-reviver-power-gel-6609\"\u003e\n              Osmo Wood Reviver Power-Gel\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Restoring greyed and weathered timber before recoating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaner-1l\"\u003e\n              Osmo Decking Cleaner\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            General cleaning and preparation of suitable exterior timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaning-scrub-brush-150mm\"\u003e\n              Osmo Decking Cleaning Scrub Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Working exterior cleaners and Reviver Gel into the timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wr-base-coat-clear-4001\"\u003e\n              Osmo WR Base Coat\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Optional base protection for suitable softwood and exterior timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-brush-cleaner-and-thinner-8000-1l\"\u003e\n              Osmo Brush Cleaner \u0026amp; Thinner\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Cleaning suitable brushes, rollers and application equipment.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eAvailable Sizes\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eSize\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eApproximate Coverage Per Coat\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e5ml Sample Sachet\u003c\/td\u003e\n          \u003ctd\u003eSmall test area\u003c\/td\u003e\n          \u003ctd\u003e\n            Comparing colours and checking the final appearance on the actual\n            exterior timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e0.75L\u003c\/td\u003e\n          \u003ctd\u003eUp to approximately 13.5m²\u003c\/td\u003e\n          \u003ctd\u003e\n            Doors, windows, gates and smaller cladding or fencing projects.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e2.5L\u003c\/td\u003e\n          \u003ctd\u003eUp to approximately 45m²\u003c\/td\u003e\n          \u003ctd\u003e\n            Larger cladding, fencing, pergolas and professional exterior work.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cp class=\"wwfs-small-print\"\u003e\n    Coverage is based on approximately 18m² per litre for one thin coat on\n    smooth, prepared timber. Rough-sawn, textured, weathered or highly\n    absorbent timber may require more product.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eCalculate for Two Coats:\u003c\/strong\u003e New untreated timber normally\n      requires two thin coats. A 2.5L tin may cover up to approximately 45m²\n      for one coat or approximately 22.5m² as a complete two-coat system.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eTechnical Information\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n          \u003ctd\u003eTransparent pigmented exterior UV-protection oil\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eRecommended use\u003c\/th\u003e\n          \u003ctd\u003eVertical exterior timber surfaces\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eAvailable colours\u003c\/th\u003e\n          \u003ctd\u003e425 Oak, 428 Red Cedar, 429 Natural and 432 Light Oak\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eSheen\u003c\/th\u003e\n          \u003ctd\u003eSatin\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eAvailable sizes\u003c\/th\u003e\n          \u003ctd\u003e5ml sample sachet, 0.75L and 2.5L\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eRecommended coats\u003c\/th\u003e\n          \u003ctd\u003eTwo thin coats on bare timber\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eAlternative second coat\u003c\/th\u003e\n          \u003ctd\u003eCompatible clear UV-Protection Oil Extra\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eRenovation coat\u003c\/th\u003e\n          \u003ctd\u003eNormally one thin coat on clean, sound existing finishes\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eApproximate coverage\u003c\/th\u003e\n          \u003ctd\u003eUp to approximately 18m² per litre, per coat\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eApproximate drying time\u003c\/th\u003e\n          \u003ctd\u003eApproximately 12 hours with good ventilation\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eMaximum timber moisture\u003c\/th\u003e\n          \u003ctd\u003eApproximately 20%\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eUV performance\u003c\/th\u003e\n          \u003ctd\u003e\n            UV-protection factor up to 12 compared with untreated wood when two\n            coloured coats are applied\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eActive film protection\u003c\/th\u003e\n          \u003ctd\u003e\n            Helps delay mould, algae and fungal attack within the coating\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eApplication tools\u003c\/th\u003e\n          \u003ctd\u003eOsmo Flat Brush or Microfibre Roller\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eTool cleaning\u003c\/th\u003e\n          \u003ctd\u003eOsmo Brush Cleaner \u0026amp; Thinner\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eReady to use\u003c\/th\u003e\n          \u003ctd\u003eYes – stir thoroughly and do not thin\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003cth scope=\"row\"\u003eUse location\u003c\/th\u003e\n          \u003ctd\u003eExterior use only\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cp class=\"wwfs-small-print\"\u003e\n    Coverage, colour and drying times are approximate. Timber species,\n    porosity, texture, preparation, temperature, humidity, airflow and coating\n    thickness will influence the result.\n  \u003c\/p\u003e\n\n  \u003ch2\u003eBest Conditions for Application\u003c\/h2\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eApply to clean, dry and frost-free timber.\u003c\/li\u003e\n    \u003cli\u003eTimber moisture content must not exceed approximately 20%.\u003c\/li\u003e\n    \u003cli\u003eChoose a dry weather window with no rain expected during drying.\u003c\/li\u003e\n    \u003cli\u003eAvoid application in intense direct sunlight.\u003c\/li\u003e\n    \u003cli\u003eDo not apply to excessively hot timber.\u003c\/li\u003e\n    \u003cli\u003eAvoid frost, heavy dew and high humidity.\u003c\/li\u003e\n    \u003cli\u003eProvide good airflow during drying.\u003c\/li\u003e\n    \u003cli\u003eAllow each coat to dry completely before recoating.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eProtect from Rain and Dew:\u003c\/strong\u003e Moisture reaching the coating\n      before it has dried may cause patchiness, marking, pigment movement and\n      prolonged drying.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n      Ensure the timber is clean, dry, frost-free and free from grease, algae,\n      dirt and contamination.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Timber moisture content must be below approximately 20%.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Allow new ingredient-rich or resinous timber to weather until it becomes\n      sufficiently absorbent.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Clean old compatible microporous finishes thoroughly.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Lightly sand worn or uneven surfaces where required.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Completely remove paints, varnishes, lacquers and incompatible\n      film-forming coatings.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Do not sand smooth timber finer than approximately P120.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Revive greyed timber using\n      \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wood-reviver-power-gel-6609\"\u003e\n        Osmo Wood Reviver Power-Gel\n      \u003c\/a\u003e.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Consider\n      \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wr-base-coat-clear-4001\"\u003e\n        Osmo WR Base Coat\n      \u003c\/a\u003e\n      on suitable softwood where additional preservative protection is wanted.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Round sharp exterior edges to more than approximately 2mm where\n      practical.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Ensure horizontal sections attached to vertical timber have sufficient\n      fall to shed water.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Remove all sanding dust.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Stir the tinted oil thoroughly before and throughout application.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Complete a representative trial before coating the full area.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eConsistent Preparation Produces Consistent Colour:\u003c\/strong\u003e\n      Different sanding grades, weathering and timber porosity can produce\n      visible changes in colour intensity. Prepare the complete area using the\n      same process.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eHow to Apply UV-Protection Oil Tints\u003c\/h2\u003e\n\n  \u003col class=\"wwfs-step-list\"\u003e\n    \u003cli\u003e\n      Confirm the timber is clean, dry and ready to absorb oil.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Stir the product thoroughly from the bottom of the tin. Do not thin.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Cut in around edges, frames, joints and difficult areas using a suitable\n      brush.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Apply the first coat exceptionally thinly using an\n      \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-natural-bristle-brush\"\u003e\n        Osmo Flat Brush\n      \u003c\/a\u003e\n      or suitable microfibre roller.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Work carefully along the timber grain and spread the coating thoroughly.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Complete individual doors, boards or panels from end to end where\n      possible.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Maintain a wet edge and avoid heavy overlaps.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Check corners, rebates, joints and lower edges for runs or pigment\n      build-up.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Redistribute all visible excess before allowing the coating to dry.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Allow approximately 12 hours’ drying with good ventilation.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Apply the second coloured coat equally thinly for maximum colour and UV\n      protection.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Alternatively, apply one thin coat of clear UV-Protection Oil Extra as\n      the final coat where a lighter colour build is preferred.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Protect the surface from rain, dew and contamination while drying.\n    \u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eProfessional Application Tip:\u003c\/strong\u003e\u003cbr\u003e\n      Stir regularly while working. Pigment can settle in the tin, particularly\n      during larger projects. Failure to remix the product may cause the first\n      and last sections to appear different.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      Apply thinly. Heavy coats do not provide better UV protection and can\n      lead to slow drying, runs, uneven colour and increased sheen.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eApplying 429 Natural\u003c\/h2\u003e\n\n  \u003col class=\"wwfs-step-list\"\u003e\n    \u003cli\u003e\n      Stir thoroughly to distribute the white pigment.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Apply an exceptionally thin and even coat with the timber grain.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Avoid heavy overlaps, particularly around edges and joints.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Inspect the surface from several angles while wet.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Redistribute any visible white, cloudy or chalky pigment.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Allow the first coat to dry fully.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Apply the second coat equally thinly.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Test carefully before using 429 Natural on dark or reddish timber.\n    \u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eRenovating an Existing Coloured Finish\u003c\/h2\u003e\n\n  \u003col class=\"wwfs-step-list\"\u003e\n    \u003cli\u003e\n      Inspect the timber for dirt, wear, greying and coating failure.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Clean the surface thoroughly.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Use Wood Reviver Power-Gel where the timber has already greyed.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Allow the timber to dry completely.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Lightly sand loose, rough or uneven areas where necessary.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Remove all dust.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Apply one exceptionally thin coat of the matching tint where the existing\n      finish remains sound.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Where the timber has become bare or heavily weathered, apply a full\n      two-coat system.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      Protect the coating from rain and dew while drying.\n    \u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eRecoat Before the Colour Disappears:\u003c\/strong\u003e\u003cbr\u003e\n      Maintenance is normally straightforward when the timber is cleaned and\n      given one thin coat as soon as fading becomes visible. Waiting until the\n      surface is bare or fully greyed requires significantly more preparation.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eCleaning and Maintenance\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eMaintenance Stage\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eRecommended Product\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGeneral cleaning\u003c\/td\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaner-1l\"\u003e\n              Osmo Decking Cleaner\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Removing general dirt and exterior contamination.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eGreyed timber restoration\u003c\/td\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wood-reviver-power-gel-6609\"\u003e\n              Osmo Wood Reviver Power-Gel\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Removing grey weathering before recoating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eCleaning and scrubbing\u003c\/td\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaning-scrub-brush-150mm\"\u003e\n              Osmo Decking Cleaning Scrub Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Working cleaning products into the timber grain and texture.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003eMaintenance coating\u003c\/td\u003e\n          \u003ctd\u003eMatching UV-Protection Oil Tint\u003c\/td\u003e\n          \u003ctd\u003e\n            Restoring colour and weather protection when fading begins.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eImportant Application Notes\u003c\/h2\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eUse only on suitable vertical exterior timber.\u003c\/li\u003e\n\n    \u003cli\u003eDo not use as the primary finish for horizontal decking.\u003c\/li\u003e\n\n    \u003cli\u003eUV-Protection Oil Tints is for exterior use only.\u003c\/li\u003e\n\n    \u003cli\u003eApply two exceptionally thin coats to bare timber.\u003c\/li\u003e\n\n    \u003cli\u003e\n      One tinted coat followed by clear Extra produces a lighter colour but a\n      shorter expected maintenance interval.\n    \u003c\/li\u003e\n\n    \u003cli\u003eStir thoroughly before and throughout application.\u003c\/li\u003e\n\n    \u003cli\u003eDo not thin the product.\u003c\/li\u003e\n\n    \u003cli\u003eTimber moisture must not exceed approximately 20%.\u003c\/li\u003e\n\n    \u003cli\u003eDo not sand smooth timber finer than approximately P120.\u003c\/li\u003e\n\n    \u003cli\u003e\n      Heavy application may cause runs, slow drying and uneven colour.\n    \u003c\/li\u003e\n\n    \u003cli\u003eAllow approximately 12 hours between coats.\u003c\/li\u003e\n\n    \u003cli\u003eProtect from rain, dew and contamination during drying.\u003c\/li\u003e\n\n    \u003cli\u003eAllow oily and ingredient-rich timber to weather before coating.\u003c\/li\u003e\n\n    \u003cli\u003e\n      Consider WR Base Coat for suitable softwood requiring additional\n      preservative protection.\n    \u003c\/li\u003e\n\n    \u003cli\u003e429 Natural contains white pigment and should be applied very thinly.\u003c\/li\u003e\n\n    \u003cli\u003e\n      Darker transparent colours generally provide greater visible UV\n      resistance.\n    \u003c\/li\u003e\n\n    \u003cli\u003eAlways complete a representative test area.\u003c\/li\u003e\n\n    \u003cli\u003e\n      Use Wood Reviver Power-Gel where the timber has already begun to grey.\n    \u003c\/li\u003e\n\n    \u003cli\u003eInspect the coating at least annually and recoat when necessary.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eTool Cleaning\u003c\/h2\u003e\n\n  \u003cp\u003e\n    Clean suitable brushes, rollers and reusable application equipment\n    immediately after use with\n    \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-brush-cleaner-and-thinner-8000-1l\"\u003e\n      Osmo Brush Cleaner \u0026amp; Thinner\n    \u003c\/a\u003e.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n    \u003cp\u003e\n      \u003cstrong\u003eOil-Soaked Cloth Safety:\u003c\/strong\u003e Cloths, pads and absorbent\n      materials contaminated with drying oils can generate heat while curing.\n      Lay them flat outdoors to dry safely or store them in a suitable sealed\n      metal container before disposal in accordance with the product safety\n      information.\n    \u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eComplete Your Osmo Exterior System\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-table-wrap\"\u003e\n    \u003ctable class=\"wwfs-spec-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"col\"\u003eProduct\u003c\/th\u003e\n          \u003cth scope=\"col\"\u003eRecommended Use\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-uv-protection-oil-extra\"\u003e\n              Osmo UV-Protection Oil Extra\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Clear matt or satin exterior protection and an optional clear final\n            coat over the selected tint.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-natural-bristle-brush\"\u003e\n              Osmo Flat Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Thin and controlled application to doors, windows and cladding.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-roller-set\"\u003e\n              Osmo Roller Set\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Efficient application to larger smooth exterior timber surfaces.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wood-reviver-power-gel-6609\"\u003e\n              Osmo Wood Reviver Power-Gel\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Reviving greyed and weathered timber before recoating.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaner-1l\"\u003e\n              Osmo Decking Cleaner\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            General cleaning and preparation of suitable exterior timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-cleaning-scrub-brush-150mm\"\u003e\n              Osmo Decking Cleaning Scrub Brush\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Working cleaner or Wood Reviver into the timber grain.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-wr-base-coat-clear-4001\"\u003e\n              Osmo WR Base Coat\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Optional preservative base protection for suitable exterior timber.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-brush-cleaner-and-thinner-8000-1l\"\u003e\n              Osmo Brush Cleaner \u0026amp; Thinner\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Cleaning suitable application tools immediately after use.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n          \u003ctd\u003e\n            \u003ca href=\"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-decking-oil-0-75l\"\u003e\n              Osmo Decking Oil\n            \u003c\/a\u003e\n          \u003c\/td\u003e\n          \u003ctd\u003e\n            Protection for horizontal decking, steps and exterior walking\n            surfaces.\n          \u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"5ml Sample Sachet \/ 425 - Oak","offer_id":43131633926201,"sku":"YT-FV6U-7OCN-SAMPLE","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"5ml Sample Sachet \/ 428 - Red Cedar","offer_id":43131633958969,"sku":"KA-B5WX-FRN5-SAMPLE","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"5ml Sample Sachet \/ 429 - Natural","offer_id":43131633991737,"sku":"D9-X822-8Z7T-SAMPLE","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"5ml Sample Sachet \/ 432 - Light Oak","offer_id":43131634024505,"sku":"OSMO-432-SAMPLE","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"0.75L \/ 425 - Oak","offer_id":39759108898873,"sku":"YT-FV6U-7OCN","price":28.66,"currency_code":"GBP","in_stock":true},{"title":"0.75L \/ 428 - Red Cedar","offer_id":39759108931641,"sku":"KA-B5WX-FRN5","price":28.66,"currency_code":"GBP","in_stock":true},{"title":"0.75L \/ 429 - Natural","offer_id":39759108964409,"sku":"D9-X822-8Z7T","price":28.66,"currency_code":"GBP","in_stock":true},{"title":"0.75L \/ 432 - Light Oak","offer_id":39822477164601,"sku":"OSMO-432-075","price":28.66,"currency_code":"GBP","in_stock":true},{"title":"2.5L \/ 425 - Oak","offer_id":39822470283321,"sku":"L3-E4M4-K527","price":83.48,"currency_code":"GBP","in_stock":true},{"title":"2.5L \/ 428 - Red Cedar","offer_id":39822470316089,"sku":"EB-H2H7-RM53","price":83.48,"currency_code":"GBP","in_stock":true},{"title":"2.5L \/ 429 - Natural","offer_id":39822470348857,"sku":"23-WK8H-X712","price":83.48,"currency_code":"GBP","in_stock":true},{"title":"2.5L \/ 432 - Light Oak","offer_id":39822477197369,"sku":"OSMO-432-25","price":83.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/7309\/3177\/products\/osmo-uv-protection-oil-tints-271387.jpg?v=1750765938","url":"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/osmo-uv-protection-oil-tints-coloured-exterior-wood-oil","provider":"Wiltshire Wood Flooring Supplies","version":"1.0","type":"link"}