{"product_id":"bona-craft-oil-2k-coloured-wood-floor-oil","title":"Bona Craft Oil 2K Coloured Wood Floor Oil","description":"\u003cdiv class=\"wwfs-product-description\"\u003e\n\n  \u003cdiv class=\"wwfs-product-intro\"\u003e\n\n    \u003cp\u003e\u003cstrong\u003eBona Craft Oil 2K\u003c\/strong\u003e is a professional two-component penetrating wood floor oil that combines rich colour, rapid drying and durable protection in a single application.\u003c\/p\u003e\n\n    \u003cp\u003eFormulated using modified vegetable oils and a separate hardener, it penetrates deeply into the timber rather than forming a conventional surface film. This preserves the natural texture and grain of the wood while creating a highly resistant, low-sheen finish suitable for domestic and commercial wooden floors.\u003c\/p\u003e\n\n    \u003cp\u003eBona Craft Oil 2K can be used as a complete oil finish on its own, overcoated with \u003ca href=\"\/products\/bona-hard-wax-oil-neutral\"\u003eBona Hard Wax Oil\u003c\/a\u003e for a traditional hardwax-oiled surface, or protected with \u003ca href=\"\/products\/bona-traffic-hd-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD\u003c\/a\u003e for increased wear resistance and reduced maintenance.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\n  \u003ch2\u003eAvailable Colours\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-feature-grid\"\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eAsh\u003c\/h3\u003e\n      \u003cp\u003eA soft pale-grey tone that creates a refined, lightly weathered appearance while retaining the natural timber grain.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eDark Grey\u003c\/h3\u003e\n      \u003cp\u003eA deeper grey finish for stronger contemporary colour schemes and more dramatic timber floors.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eDriftwood\u003c\/h3\u003e\n      \u003cp\u003eA weathered coastal shade designed to create the character of naturally aged and sun-exposed timber.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eFrost\u003c\/h3\u003e\n      \u003cp\u003eA pale, cool-toned finish that softens the natural timber colour and creates a light Scandinavian appearance.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eSand\u003c\/h3\u003e\n      \u003cp\u003eA warm, understated natural tone inspired by pale sand and lightly warmed timber.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n\n    \u003ch3\u003eAlways Test the Complete System First\u003c\/h3\u003e\n\n    \u003cp\u003eThe final appearance will vary according to the timber species, natural colour, grain, sanding sequence, surface texture and application method.\u003c\/p\u003e\n\n    \u003cp\u003eAlways complete a representative test area using the full intended finishing system, including any Bona Traffic or Hard Wax Oil topcoats, before treating the complete floor.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\n  \u003ch2\u003eWhy Choose Bona Craft Oil 2K?\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-benefit-list\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eProfessional two-component penetrating wood floor oil.\u003c\/li\u003e\n      \u003cli\u003eColours and protects the timber in one application.\u003c\/li\u003e\n      \u003cli\u003eFast drying compared with traditional floor oils.\u003c\/li\u003e\n      \u003cli\u003eExcellent resistance to common household chemicals and spills.\u003c\/li\u003e\n      \u003cli\u003eLong open time and extended pot life.\u003c\/li\u003e\n      \u003cli\u003ePreserves the natural grain and tactile feel of the timber.\u003c\/li\u003e\n      \u003cli\u003eSuitable as a complete oil finish on its own.\u003c\/li\u003e\n      \u003cli\u003eCan be overcoated with Bona Hard Wax Oil.\u003c\/li\u003e\n      \u003cli\u003eCan be overcoated with Bona Traffic HD or Traffic GO.\u003c\/li\u003e\n      \u003cli\u003eSuitable for many timber species, including walnut, cherry, smoked oak and steamed beech.\u003c\/li\u003e\n      \u003cli\u003eR10 slip classification under EN 16165 Annex B.\u003c\/li\u003e\n      \u003cli\u003eGREENGUARD Gold and EMICODE EC1 certified.\u003c\/li\u003e\n      \u003cli\u003eComplies with EN 71-3 requirements for application on children’s toys.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eSuitable For\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-benefit-list\"\u003e\n    \u003cul\u003e\n      \u003cli\u003eSolid wood flooring.\u003c\/li\u003e\n      \u003cli\u003eEngineered wood flooring with a suitable sandable wear layer.\u003c\/li\u003e\n      \u003cli\u003eParquet and herringbone flooring.\u003c\/li\u003e\n      \u003cli\u003eOak flooring.\u003c\/li\u003e\n      \u003cli\u003eWalnut and cherry flooring.\u003c\/li\u003e\n      \u003cli\u003eSmoked oak and steamed beech.\u003c\/li\u003e\n      \u003cli\u003eDomestic interiors.\u003c\/li\u003e\n      \u003cli\u003eCommercial interiors when used with the correct Bona topcoat system.\u003c\/li\u003e\n      \u003cli\u003eProfessionally sanded existing timber floors.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eChoose the Correct Finishing System\u003c\/h2\u003e\n\n  \u003ctable class=\"wwfs-table\"\u003e\n    \u003ctbody\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eRequired Finish\u003c\/th\u003e\n        \u003cth\u003eRecommended System\u003c\/th\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003ctd\u003eNatural oil appearance with moderate to high wear resistance\u003c\/td\u003e\n        \u003ctd\u003e1 coat of Bona Craft Oil 2K.\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003ctd\u003eTraditional hardwax-oiled finish\u003c\/td\u003e\n        \u003ctd\u003e1 coat of Bona Craft Oil 2K followed by 2 coats of \u003ca href=\"\/products\/bona-hard-wax-oil-neutral\"\u003eBona Hard Wax Oil\u003c\/a\u003e.\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003ctd\u003eHeavy commercial wear and reduced maintenance\u003c\/td\u003e\n        \u003ctd\u003e1 coat of Bona Craft Oil 2K followed by 2 coats of \u003ca href=\"\/products\/bona-traffic-hd-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD\u003c\/a\u003e.\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003ctd\u003eColoured oil with an ultra-matt lacquered surface\u003c\/td\u003e\n        \u003ctd\u003e1 coat of Bona Craft Oil 2K followed by 2 coats of \u003ca href=\"\/products\/bona-traffic-hd-raw-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD Raw\u003c\/a\u003e, subject to the current Bona system instructions.\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eRecommended Application Methods\u003c\/h2\u003e\n\n  \u003cdiv class=\"wwfs-feature-grid\"\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eBona Oil Cloths\u003c\/h3\u003e\n\n      \u003cp\u003eOur preferred method for controlled hand application and for removing surplus oil. The highly absorbent cloths help work the product evenly into the timber while reducing the risk of heavy deposits, streaks and sticky residue.\u003c\/p\u003e\n\n      \u003cp\u003e\u003ca href=\"\/products\/bona-oil-cloth-50-x-60-cm-60-cm\"\u003eView Bona Oil Cloths\u003c\/a\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eBona Flat-Bladed Trowel\u003c\/h3\u003e\n\n      \u003cp\u003eA professional method for applying an exceptionally thin and controlled coat across open floor areas. The oil must still be buffed into the timber and all surplus material removed afterwards.\u003c\/p\u003e\n\n      \u003cp\u003e\u003ca href=\"\/products\/bona-flat-bladed-trowel\"\u003eView Bona Flat-Bladed Trowel\u003c\/a\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eOsmo Applicator Set\u003c\/h3\u003e\n\n      \u003cp\u003eThe hand pad and application fleece provide excellent control on smaller areas, edges and detailed sections. Apply the oil sparingly, work it evenly into the grain and remove any remaining surplus with clean Bona Oil Cloths.\u003c\/p\u003e\n\n      \u003cp\u003e\u003ca href=\"\/products\/osmo-applicator-set-for-applying-osmo-oils\"\u003eView Osmo Applicator Set\u003c\/a\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"wwfs-feature\"\u003e\n      \u003ch3\u003eShort-Haired Microfibre Roller\u003c\/h3\u003e\n\n      \u003cp\u003eA short-haired microfibre roller can be used to distribute the oil quickly across larger open areas. The roller is used to spread the product only; it must not be left as the finished application.\u003c\/p\u003e\n\n      \u003cp\u003eAfter the timber has absorbed the oil, work the surface with the correct pad and remove every trace of surplus oil using clean cloths.\u003c\/p\u003e\n\n      \u003cp\u003e\u003ca href=\"\/products\/osmo-roller-set\"\u003eView Osmo Floor Roller Set\u003c\/a\u003e\u003c\/p\u003e\n    \u003c\/div\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n\n    \u003ch3\u003eLess Is More\u003c\/h3\u003e\n\n    \u003cp\u003eBona Craft Oil 2K is a penetrating oil rather than a film-forming coating. Applying too much product or failing to remove all surplus oil can result in slow drying, sticky areas, uneven colour and adhesion problems beneath subsequent topcoats.\u003c\/p\u003e\n\n    \u003cp\u003eWhatever application tool is used, the finished surface must not be left wet or loaded with excess product.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\n  \u003ch2\u003eMachine Application and Buffing\u003c\/h2\u003e\n\n  \u003cp\u003eFor larger floor areas, Craft Oil 2K can be worked into the timber using a rotary floor buffer.\u003c\/p\u003e\n\n  \u003col\u003e\n    \u003cli\u003eApply a thin and even coat using a cloth, flat-bladed trowel, short-haired roller or another approved application method.\u003c\/li\u003e\n    \u003cli\u003eAllow the timber to absorb the oil for approximately 15–30 minutes.\u003c\/li\u003e\n    \u003cli\u003eBuff the surface using a machine fitted with a red or beige pad.\u003c\/li\u003e\n    \u003cli\u003eApply a small additional amount only to areas that remain visibly dry or highly absorbent.\u003c\/li\u003e\n    \u003cli\u003eAllow a further 15–30 minutes of contact time.\u003c\/li\u003e\n    \u003cli\u003eFit clean \u003ca href=\"\/products\/bona-oil-cloth-50-x-60-cm-60-cm\"\u003eBona Oil Cloths\u003c\/a\u003e beneath the buffing machine and remove all surplus oil.\u003c\/li\u003e\n    \u003cli\u003eComplete the final buff using a Bona Wool Pad to create a smooth and consistent surface.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n\n    \u003ch3\u003eHand Application with a White Pad\u003c\/h3\u003e\n\n    \u003cp\u003eA white hand pad can be useful for working Craft Oil 2K into smaller areas, edges and corners where a rotary machine cannot reach.\u003c\/p\u003e\n\n    \u003cp\u003eUse the pad to distribute and work the oil evenly into the grain, then remove all surplus product with clean Bona Oil Cloths. The pad does not replace the final excess-oil removal stage.\u003c\/p\u003e\n\n    \u003cp\u003e\u003ca href=\"\/products\/hand-pad-holder-and-accessories\"\u003eView Osmo Hand Pad Holder and White Pads\u003c\/a\u003e\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\n  \u003ch2\u003eOvercoating with Bona Traffic\u003c\/h2\u003e\n\n  \u003cp\u003eBona Craft Oil 2K may be overcoated with two coats of Bona Traffic HD or Bona Traffic GO to increase overall wear resistance, reduce maintenance and help preserve coloured finishes in heavily used areas.\u003c\/p\u003e\n\n  \u003col\u003e\n    \u003cli\u003eApply one controlled coat of Bona Craft Oil 2K and remove all surplus oil thoroughly.\u003c\/li\u003e\n    \u003cli\u003eAllow neutral oil to dry for at least 8 hours or coloured oil for at least 12 hours under normal conditions.\u003c\/li\u003e\n    \u003cli\u003eTest the surface using a clean cotton or paper cloth.\u003c\/li\u003e\n    \u003cli\u003eIf noticeable pigment transfers onto the cloth, allow additional drying time.\u003c\/li\u003e\n    \u003cli\u003eOnce completely dry, buff the surface using a red pad.\u003c\/li\u003e\n    \u003cli\u003eVacuum the floor thoroughly to remove all residue.\u003c\/li\u003e\n    \u003cli\u003eApply two coats of \u003ca href=\"\/products\/bona-traffic-hd-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD\u003c\/a\u003e, Traffic GO or the selected approved Traffic-family lacquer using a suitable lacquer roller.\u003c\/li\u003e\n    \u003cli\u003eWhere required, carry out a gentle intermediate abrasion using a Bona Scrad Pad before the final lacquer coat.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n\n    \u003ch3\u003eTraffic Overcoating Conditions\u003c\/h3\u003e\n\n    \u003cul\u003e\n      \u003cli\u003eCraft Oil 2K must be used on its own without Bona Rich Tone or other additives when it will be overcoated with Traffic.\u003c\/li\u003e\n      \u003cli\u003eEvery trace of surplus oil must be removed before drying.\u003c\/li\u003e\n      \u003cli\u003eThe surface must be completely dry before red-pad buffing.\u003c\/li\u003e\n      \u003cli\u003eDo not proceed while pigment transfers noticeably to a clean cloth.\u003c\/li\u003e\n      \u003cli\u003eOnly light foot traffic should be permitted during the first 72 hours.\u003c\/li\u003e\n      \u003cli\u003eWait at least one week before covering the floor with rugs or mats.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n\n    \u003ch3\u003eTraffic HD or Traffic HD Raw?\u003c\/h3\u003e\n\n    \u003cp\u003eChoose \u003ca href=\"\/products\/bona-traffic-hd-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD\u003c\/a\u003e when maximum commercial durability, chemical resistance and rapid return to use are the main priorities.\u003c\/p\u003e\n\n    \u003cp\u003eChoose \u003ca href=\"\/products\/bona-traffic-hd-raw-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD Raw\u003c\/a\u003e when you want a very low-sheen, natural-looking lacquered surface over the coloured oil.\u003c\/p\u003e\n\n    \u003cp\u003eBoth systems can alter the final depth, sheen and appearance of the colour, so always test the complete system first.\u003c\/p\u003e\n\n  \u003c\/div\u003e\n\n  \u003ch2\u003eOvercoating with Bona Hard Wax Oil\u003c\/h2\u003e\n\n  \u003cp\u003eBona Craft Oil 2K can also be used as the coloured base beneath \u003ca href=\"\/products\/bona-hard-wax-oil-neutral\"\u003eBona Hard Wax Oil\u003c\/a\u003e. This creates a traditional hardwax-oiled finish while retaining the selected Craft Oil colour beneath the protective surface coats.\u003c\/p\u003e\n\n  \u003col\u003e\n    \u003cli\u003eApply one coat of Bona Craft Oil 2K and remove all surplus material.\u003c\/li\u003e\n    \u003cli\u003eAllow coloured Craft Oil to dry for at least 12 hours under normal conditions.\u003c\/li\u003e\n    \u003cli\u003eRub the surface with a clean cotton or paper cloth to confirm that it is fully dry.\u003c\/li\u003e\n    \u003cli\u003eIf pigment transfers noticeably, allow additional drying time.\u003c\/li\u003e\n    \u003cli\u003eBuff the completely dry surface using a red pad.\u003c\/li\u003e\n    \u003cli\u003eVacuum the floor thoroughly.\u003c\/li\u003e\n    \u003cli\u003eApply two thin coats of Bona Hard Wax Oil.\u003c\/li\u003e\n    \u003cli\u003eCarry out a gentle intermediate abrasion between coats where required for the best surface finish.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n  \u003ctable class=\"wwfs-table\"\u003e\n    \u003ctbody\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eManufacturer\u003c\/th\u003e\n        \u003ctd\u003eBona\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eProduct Type\u003c\/th\u003e\n        \u003ctd\u003eTwo-component penetrating wood floor oil\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eBase\u003c\/th\u003e\n        \u003ctd\u003eModified vegetable oils with isocyanate hardener\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eAvailable WWFS Colours\u003c\/th\u003e\n        \u003ctd\u003eAsh, Dark Grey, Driftwood, Frost and Sand\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eAvailable Sizes\u003c\/th\u003e\n        \u003ctd\u003e400ml and 1.25L\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eMixing Ratio\u003c\/th\u003e\n        \u003ctd\u003e9 parts oil to 1 part hardener by volume\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003ePot Life\u003c\/th\u003e\n        \u003ctd\u003eApproximately 6–8 hours\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eApplication Rate\u003c\/th\u003e\n        \u003ctd\u003eApproximately 30m² per litre, depending on timber species and absorbency\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eApproximate 400ml Coverage\u003c\/th\u003e\n        \u003ctd\u003eUp to approximately 12m²\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eApproximate 1.25L Coverage\u003c\/th\u003e\n        \u003ctd\u003eUp to approximately 37.5m²\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eAbsorption Time\u003c\/th\u003e\n        \u003ctd\u003eApproximately 15–30 minutes before initial buffing\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eLight Use\u003c\/th\u003e\n        \u003ctd\u003eNeutral: approximately 8 hours; coloured oil: approximately 12 hours\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eApplication Tools\u003c\/th\u003e\n        \u003ctd\u003e\n          \u003ca href=\"\/products\/bona-oil-cloth-50-x-60-cm-60-cm\"\u003eBona Oil Cloths\u003c\/a\u003e,\n          \u003ca href=\"\/products\/bona-flat-bladed-trowel\"\u003eBona Flat-Bladed Trowel\u003c\/a\u003e,\n          \u003ca href=\"\/products\/osmo-applicator-set-for-applying-osmo-oils\"\u003eOsmo Applicator Set\u003c\/a\u003e or\n          \u003ca href=\"\/products\/osmo-roller-set\"\u003eshort-haired microfibre roller\u003c\/a\u003e\n        \u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eMachine Buffing\u003c\/th\u003e\n        \u003ctd\u003eRed or beige pad, followed by cotton cloths and a Bona Wool Pad\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003ePre-Topcoat Preparation\u003c\/th\u003e\n        \u003ctd\u003eConfirm dry, buff with a red pad and vacuum thoroughly\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eSolids Content\u003c\/th\u003e\n        \u003ctd\u003eApproximately 96–98%\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eSlip Classification\u003c\/th\u003e\n        \u003ctd\u003eR10 under EN 16165 Annex B\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eStorage\u003c\/th\u003e\n        \u003ctd\u003eStore between +5°C and +30°C\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n      \u003ctr\u003e\n        \u003cth\u003eShelf Life\u003c\/th\u003e\n        \u003ctd\u003eUp to 2 years in the original unopened container\u003c\/td\u003e\n      \u003c\/tr\u003e\n\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eFloor Preparation\u003c\/h2\u003e\n\n  \u003cp\u003eThe final appearance of a coloured penetrating oil is highly dependent on the quality and consistency of the sanding process.\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eAllow the floor to acclimatise to its normal end-use environment.\u003c\/li\u003e\n    \u003cli\u003eSand the complete floor evenly back to clean, bare timber.\u003c\/li\u003e\n    \u003cli\u003eUse the same final sanding sequence across the entire area.\u003c\/li\u003e\n    \u003cli\u003eRemove all sanding dust, wax, polish and contamination.\u003c\/li\u003e\n    \u003cli\u003eFill suitable fine gaps before the final sanding stage using \u003ca href=\"\/products\/bona-mix-fill-plus-wood-floor-gap-filler-5l\"\u003eBona Mix \u0026amp; Fill Plus\u003c\/a\u003e or \u003ca href=\"\/products\/bona-mix-fill-wood-floor-gap-filler\"\u003eBona Mix \u0026amp; Fill\u003c\/a\u003e.\u003c\/li\u003e\n    \u003cli\u003eDo not allow oil to drain freely into open, unfilled joints.\u003c\/li\u003e\n    \u003cli\u003eBring the oil and hardener to room temperature before use.\u003c\/li\u003e\n    \u003cli\u003eApply only when the floor temperature is at least 16°C.\u003c\/li\u003e\n    \u003cli\u003eOptimal application conditions are approximately 20–25°C and 30–50% relative humidity.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eHow to Apply Bona Craft Oil 2K\u003c\/h2\u003e\n\n  \u003ch3\u003e1. Mix the Two Components\u003c\/h3\u003e\n\n  \u003cp\u003eRelease the hardener from the upper container into the oil and allow it to drain fully. Remove the upper container and mix the contents thoroughly until completely uniform.\u003c\/p\u003e\n\n  \u003ch3\u003e2. Apply a Thin Coat\u003c\/h3\u003e\n\n  \u003cp\u003eApply and distribute a thin, even coat using the selected method. Work in manageable sections and overlap wet-on-wet.\u003c\/p\u003e\n\n  \u003ch3\u003e3. Allow the Timber to Absorb the Oil\u003c\/h3\u003e\n\n  \u003cp\u003eAllow approximately 15–30 minutes for the timber to absorb the oil.\u003c\/p\u003e\n\n  \u003ch3\u003e4. Work the Oil into the Timber\u003c\/h3\u003e\n\n  \u003cp\u003eBuff the surface with a red or beige machine pad, or work smaller areas manually using an appropriate white pad or application cloth.\u003c\/p\u003e\n\n  \u003ch3\u003e5. Saturate Dry Areas Only\u003c\/h3\u003e\n\n  \u003cp\u003eApply a small additional amount only to areas that remain visibly dry or highly absorbent.\u003c\/p\u003e\n\n  \u003ch3\u003e6. Remove All Surplus Oil\u003c\/h3\u003e\n\n  \u003cp\u003eAfter a further 15–30 minutes, remove every trace of surplus oil using clean \u003ca href=\"\/products\/bona-oil-cloth-50-x-60-cm-60-cm\"\u003eBona Oil Cloths\u003c\/a\u003e, either manually or fitted beneath a buffing machine.\u003c\/p\u003e\n\n  \u003ch3\u003e7. Complete the Final Buff\u003c\/h3\u003e\n\n  \u003cp\u003eBuff the complete floor using a Bona Wool Pad to produce a smooth, dry and consistent finish.\u003c\/p\u003e\n\n  \u003ch3\u003e8. Allow to Dry\u003c\/h3\u003e\n\n  \u003cp\u003eAllow coloured Craft Oil 2K to dry for at least 12 hours under normal conditions before light use or before proceeding with an approved Bona topcoat system.\u003c\/p\u003e\n\n  \u003cdiv class=\"wwfs-advice-box\"\u003e\n\n    \u003ch3\u003eRecommended Application Accessories\u003c\/h3\u003e\n\n    \u003cul\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/bona-oil-cloth-50-x-60-cm-60-cm\"\u003eBona Oil Cloths\u003c\/a\u003e – for hand application and essential removal of surplus oil.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/bona-flat-bladed-trowel\"\u003eBona Flat-Bladed Trowel\u003c\/a\u003e – for spreading an exceptionally thin coat over open floor areas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/osmo-applicator-set-for-applying-osmo-oils\"\u003eOsmo Applicator Set\u003c\/a\u003e – for controlled hand application on smaller areas and detailed sections.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/hand-pad-holder-and-accessories\"\u003eOsmo Hand Pad Holder and Pads\u003c\/a\u003e – for working oil into edges, corners and smaller areas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/osmo-roller-set\"\u003eOsmo Floor Roller Set\u003c\/a\u003e – for rapid distribution across larger open areas before buffing and excess removal.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/bona-mix-fill-plus-wood-floor-gap-filler-5l\"\u003eBona Mix \u0026amp; Fill Plus\u003c\/a\u003e – for suitable minor gaps before final sanding and oiling.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/bona-traffic-hd-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD\u003c\/a\u003e – for maximum wear resistance over the coloured oil.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/bona-traffic-hd-raw-2k-polyurethane-wood-floor-lacquer-4-95l\"\u003eBona Traffic HD Raw\u003c\/a\u003e – for a very low-sheen lacquered finish over the coloured oil.\u003c\/li\u003e\n      \u003cli\u003e\n\u003ca href=\"\/products\/bona-hard-wax-oil-neutral\"\u003eBona Hard Wax Oil\u003c\/a\u003e – for a traditional hardwax-oiled topcoat system.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"wwfs-important-box\"\u003e\n\n    \u003ch3\u003eImportant Safety Information\u003c\/h3\u003e\n\n    \u003cul\u003e\n      \u003cli\u003eBona Craft Oil 2K contains drying oils and used application materials may self-ignite.\u003c\/li\u003e\n      \u003cli\u003eImmediately place used cloths, paper, pads and rags in water or store them inside a sealed metal container.\u003c\/li\u003e\n      \u003cli\u003eNever leave oil-soaked cloths folded, piled together or inside an open waste container.\u003c\/li\u003e\n      \u003cli\u003eWear suitable gloves, eye protection and disposable shoe covers during application.\u003c\/li\u003e\n      \u003cli\u003eEnsure good ventilation throughout application and drying.\u003c\/li\u003e\n      \u003cli\u003eComponent B contains an isocyanate hardener; read the current Safety Data Sheet before use.\u003c\/li\u003e\n      \u003cli\u003eDo not over-apply the oil or leave wet material on the timber surface.\u003c\/li\u003e\n      \u003cli\u003eAlways test the colour and complete finishing system before starting the full floor.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n  \u003c\/div\u003e\n\n  \u003ch2\u003eMaintenance\u003c\/h2\u003e\n\n  \u003cp\u003eFloors finished solely with Bona Craft Oil 2K should be cleaned using a vacuum or Bona microfibre dusting pad, followed where necessary by a suitable cleaner for oiled wooden floors.\u003c\/p\u003e\n\n  \u003cp\u003eMaintain an oil-only surface using Bona Oil Care as required. Maintenance frequency will depend on the level of traffic and may range from approximately every three years in light domestic use to several treatments per year in demanding commercial environments.\u003c\/p\u003e\n\n  \u003cp\u003eWhere Craft Oil 2K has been overcoated with Bona Traffic HD or another approved Traffic-family lacquer, maintain the floor as a lacquered surface rather than an oil-only floor.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Bona","offers":[{"title":"400ml \/ Frost","offer_id":56363052695931,"sku":"GT571108001","price":33.44,"currency_code":"GBP","in_stock":false},{"title":"400ml \/ Ash","offer_id":56363052728699,"sku":"GT574108002","price":33.44,"currency_code":"GBP","in_stock":false},{"title":"400ml \/ Sand","offer_id":56363052761467,"sku":"GT579108001","price":33.44,"currency_code":"GBP","in_stock":false},{"title":"400ml \/ Dark Grey","offer_id":56363052794235,"sku":"GT590308007","price":33.44,"currency_code":"GBP","in_stock":false},{"title":"400ml \/ Driftwood","offer_id":56363052827003,"sku":"GT582008001","price":33.44,"currency_code":"GBP","in_stock":false},{"title":"1.25L \/ Frost","offer_id":56363052859771,"sku":"GT571114001","price":64.28,"currency_code":"GBP","in_stock":false},{"title":"1.25L \/ Ash","offer_id":56363052892539,"sku":"GT574114001","price":64.28,"currency_code":"GBP","in_stock":false},{"title":"1.25L \/ Sand","offer_id":56363052925307,"sku":"GT579114011","price":64.28,"currency_code":"GBP","in_stock":false},{"title":"1.25L \/ Dark Grey","offer_id":56363052958075,"sku":"GT590314007","price":64.28,"currency_code":"GBP","in_stock":false},{"title":"1.25L \/ Driftwood","offer_id":56363052990843,"sku":"GT582014011","price":64.28,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/7309\/3177\/files\/Bona2KoilDarkGrey1.25L.png?v=1785689030","url":"https:\/\/wiltshirewoodflooringsupplies.co.uk\/products\/bona-craft-oil-2k-coloured-wood-floor-oil","provider":"Wiltshire Wood Flooring Supplies","version":"1.0","type":"link"}